CONRAD ME706 Raspberry Pi Pico GPIO Terminal Expansion Board Instruction Manual
- June 12, 2024
- CONRAD
Table of Contents
CONRAD ME706 Raspberry Pi Pico GPIO Terminal Expansion Board
Product Information
- Name: Raspberry Pi Pico GPIO Terminal Expansion Board
- Type: Screw Expansion Board
- Pi Pico GPIO Size: 86*58mm
- Weight: about 45g
- Fixing hole: 3mm
- Hole pitch: 3200x2100mil (81.28×53.34mm)
- Voltage: 3.3/5V
- GPIO level : 3.3V
- Pin: 40 PIN
Product Usage Instructions
- Make sure the Raspberry Pi Pico is properly inserted into the expansion board.
- Connect the necessary peripherals or components to the expansion board, such as sensors, actuators, or other devices.
- Ensure that the fixing hole matches the mounting mechanism you intend to use for securing the expansion board.
- Use appropriate screwdrivers or tools to fasten the screws into the fixing holes, ensuring a secure connection.
- Make sure to provide a stable power supply with voltage options of either 3.3V or 5V, depending on your requirements.
- Ensure that the GPIO level is set to 3.3V for proper communication with the Raspberry Pi Pico.
- Refer to the pin diagram or product documentation to correctly identify and connect the desired GPIO pins for your project.
- Once all connections are made, power on the Raspberry Pi Pico and any connected devices.
- Follow the programming or software instructions specific to your project to utilize the expansion board’s GPIO capabilities.
Parameters
- Name: Raspberry Pi Pico GPIO Terminal Expansion Board
- Type: Screw Expansion Board Pi Pico GPIO
- Size: 86*58mm Weight: about 45g
- Fixing hole: 3mm
- Hole pitch: 3200x2100mil 81.28×53.34mm
- Voltage: 3.3/5V
- GPIO level: 3.3V Pin: 40 PIN
Apply to Raspberry Pi Pico
Pins description
Read User Manual Online (PDF format)
Loading......