alphacool RTX 4090 Core Geforce GameRock Phantom User Manual
- June 12, 2024
- ALPHACOOL
Table of Contents
Alphacool
Core Geforce RTX 4090 GameRock + Phantom
with Backplate
Safety instructions
https://www.alphacool.com/m/safety.pdf
Digital guide
https://www.alphacool.com/m/?acg=1026
Accessories
Check compatibility and prepare graphics card
Check compatibility
Before starting the cooler assembly, compare your card with the pictures in
our configurator. To do so, visit https://www.hwconfig.com and search for
your graphics card or cooler model.
For a definitiv identification, you can also compare the PCB number. The
cooler was designed for a special PCB layout. Occasionally, graphics card
manufacturers may revise the design of their card slightly, causing the cooler
not to fit on later models. During assembly, please make sure taller parts
have enough space around them and that the cooler does not damage your
graphics card.
Alphacool International GmbH is not liable for assembly errors occurring due
to negligence, such as selecting an incompatible cooler.
Prepare graphics card
Put the hardware on an antistatic mat. Begin dismantling the original cooler.
Depending on the structure of the cooler, remove the screws at the back of the
card and carefully unhook the fan connector first. If the original cooler uses
thermal glue, extreme care should be taken as you can easily damage parts.
Pick up all the items carefully. Next, clean the hardware of thermal paste or
pad residues with a solvent (e.g. isopropanol alcohol).
Remove spacers
Place thermal pads on cooling block
Apply Thermal Grease
Install PCB
Place thermal pads on PCB backside
Mount PCI bracket and backplate
Connect ARGB lighting
Screw in screw plugs with the tool
Need help?
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Germany
Support: +49 (0) 531 28874-0
Fax: +49 (0) 531 28874 – 22
E-Mail: info@alphacool.com
https://www.alphacool.com
We care!