VISUAL COMFORT TOB 5031 Vivian Mini Chandelier Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT TOB 5031 Vivian Mini Chandelier
Product Information
- Product Name: Vivian Mini Chandelier
- Item Number: TOB 5031
- Description: The Vivian Mini Chandelier is a stylish and elegant lighting fixture designed for installation in residential or commercial spaces. It features a beautiful design with a wire arm and a shade, providing a warm and inviting glow to any room.
- Installation: The installation of this light fixture should be done in accordance with all applicable local installation codes. It is recommended that the installation be carried out by a person familiar with the construction and operation of the fixture, as well as the associated hazards. Before installation, carefully inspect the item and its contents for any damage or defects. If any issues are found, do not proceed with the installation and retain all packaging material until installation is complete and approved.
Product Usage Instructions
- Remove all parts from the box.
- Install the crossbar (B) with ceiling loop (D) to the outlet box using the provided mounting screws (C).
- Gently set the wire arm (N) to the plate (M) and secure it using the provided screws.
- Connect the fixture Neutral wire (ribbed, no markings) with the neutral wire from the outlet box using wire nut (A).
- Connect the fixture Hot (smooth edge, markings) wire with the hot wire from the outlet box using wire nut (A).
Note: Ensure that you do not reverse the hot and neutral connections as it may compromise safety. Tuck these wire connections neatly into the outlet box to secure. Put canopy (E) onto ceiling loop (D) and secure it with the lock collar (G). Insert bulbs (not included) into the sockets. Clip the shade (P) onto the bulb. Turn on power at fuse or circuit breaker to complete the installation.
Care Instructions
Clean the Vivian Mini Chandelier using only a soft dry cloth or feather duster. Do not use abrasive or chemical agents when cleaning.
ASSEMBLY INSTRUCTIONS
Vivian Mini Chandelier
Item # TOB 5031
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
-
Carefully remove all parts from the box.
-
Install the crossbar (B) with ceiling loop (D) to the outlet box by mounting screws (C) provided.
-
Gently set the wire arm (N) to the plate (M) and secure using the spring washer (L) & lock nut (K) .Check that the arms are spaced evenly before final tightening.
-
Connect the hot wire (smooth edge,markings) from the arms to the main wire (smooth edge,markings) using wire nut (Q).
-
Connect the neutral wire (ribbed,no markings) from the arms to the main wire (ribbed, no markings) using wire nut (Q).
-
Wrap all connections individually with electrical tape.
-
Attach the metal column (J) to the center plate (M) and secure with thread nipple from top ring (I).
-
Unscrew the threaded collar on the chain end link (H) and attach it to the top ring (I). Close the threaded collar to secure the fixture body.
-
Let the canopy (E) and lock collar (G) pass through the chain (F).
-
With the fixture dimension as a guide, shorten the chain (F) as needed using a pair of chain pliers.
-
Unscrew the threaded collar on the other chain end link, raise the fixture then attach chain end link to the ceiling loop (D). Close the threaded collar to secure.
-
Connect the fixture ground (bare) wire with the ground wire from the outlet box using wire nut (A). If your house does not have ground wire, then attach this wire to the green grounding screw inside of the outlet box.
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. -
Connect the fixture Neutral wire (ribbed, no markings) with the neutral wire from the outlet box using wire nut (A).
-
Connect the fixture Hot (smooth edge,markings) wire with the hot wire from the outlet box using wire nut (A).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. -
Tuck these wire connections neatly into the outlet box to secure.
-
Put canopy (E) to ceiling loop (D),and secure with lock collar (G).
-
Insert bulbs (not included) into the sockets.
-
Clip the shade (P) onto the bulb.
-
Installation is complete, turn on power at fuse or circuit breaker..
Care Instructions: Clean only with a soft dry cloth or feather duster. Do Not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>