VISUAL COMFORT MF3002PWR-L Marie Flanigan Avedon Large Table Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT MF3002PWR-L Marie Flanigan Avedon Large Table Lamp
Product Information
The Avedon Large Table Lamp is a high-quality light fixture designed for indoor use. It comes with a harp, saddle, finial, shade, and protective cover (bulb not included). The lamp should be installed by a person familiar with its construction and operation, as well as the hazards involved. It is recommended to inspect the item and contents carefully before installation. If any damage or defect is found, do not install. The lamp is listed for use in the US and is LED compatible.
Product Usage Instructions
- Remove all parts from the box and place them on a clean, soft surface.
- Install the harp (C) by squeezing it together and inserting it into the top of the saddle (D).
- Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the harp (C) using the finial (A). Note: If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage.
- Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
Care Instructions
Use only a soft dry cloth or feather duster to clean the lamp. Do not use abrasive or chemical agents.
ASSEMBLY INSTRUCTIONS
Avedon Large Table Lamp
Item # MF 3002
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect items and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Install harp (C) by squeezing it together and inserting it into the top of the saddle (D).
- Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using finial (A).
- NOTE: If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage.
- Install a light bulb into the socket.
- Remove the protective cover (E) from a plug.
- Plug into an electrical outlet and test the fixture. Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.