VISUAL COMFORT CD 3601 Toco Medium Table Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CD 3601 Toco Medium Table Lamp
Product Information
The Toco Medium Table Lamp Item # CD 3601 is a light fixture that requires assembly. The package includes the following parts:
- A finial (A)
- A lampshade (B)
- A harp (C)
- A socket ring (D)
- A socket (E)
- A protective cover (F)
The lamp does not come with a bulb. The product is designed to be installed in accordance with all applicable, local installation codes by a person familiar with the construction and operation of it, as well as the hazards involved. The product should be inspected carefully before installation and if any damage or defect is found, it should not be installed. All packaging material should be retained until installation is complete and approved. The product requires scissors for assembly. After assembly, the product should be cleaned only with a soft dry cloth or feather duster. Abrasive or chemical agents should not be used.
Product Usage Instructions
-
Carefully remove all parts from the box and place them on a clean, soft surface.
-
Remove the socket ring (D) from the socket (E).
-
Install the harp (C) to the socket (E) and secure it with the socket ring (D).
-
Remove the finial (A) from the harp (C).
-
Remove the shade (B) from its packaging and install it to the harp (C) using the finial (A).
NOTE If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages. -
Install a light bulb into the socket.
-
Remove the protective cover (F) from the plug.
-
Plug the product into an electrical outlet and test the fixture.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
ASSEMBLY INSTRUCTIONS
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>