VISUAL COMFORT KW 1900 AI Large Tray Table Floor Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT KW 1900 AI Large Tray Table Floor Lamp
Product Information
The Tavlian Large Tray Table Floor Lamp (Item # KW 1900) is a light fixture that comes with a tray table and a lampshade. The lamp requires D bulbs (not included) and should be installed by a person familiar with its construction and operation as well as the hazards involved. The product comes with assembly instructions, and all parts required for assembly are included in the package.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Install rod (E) to plate (H) and secure it with plastic washer (K) and screws (I). Refer to diagram 1.
- Connect quick connectors (G1) & (G2) together.
- Install fixture body (J) to plate (H) and secure it with screws (L). Refer to diagram 1.
- Remove finial (B) from cluster (D).
- Remove shade (C) from packaging and install it to the cluster (D) using finial (B). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
- Install light bulbs into the sockets.
- Place diffuser (A) onto the top of shade (C).
- Remove protective cover (F) from plug.
- Plug into an electrical outlet and test the fixture.
NOTICE: Before installation, inspect the item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
Product Tools Required (Not Included)
- Phillips Screwdriver
- Slotted Screwdriver
- Scissors
Persons Required
Two persons are required for the assembly process.
Care Instructions
Clean the product only with a soft dry cloth or feather duster.
Do not use abrasive or chemical agents.
IMPORTANT: This product is LED listed for use in the United States only.
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
- Phillips Screwdriver
- Slotted Screwdriver
- Scissors
PERSONS REQUIRED: Two
ASSEMBLY INSTRUCTIONS
-
Carefully remove all parts from the box. Place on a clean, soft surface.
NOTE: It is recommended to have a helper assist in supporting the item for steps 2-4. -
Install rod (E) to plate (H) and secure with plastic washer (K) and screws (I). See diagram 1.
-
Connect quick connectors (G1) & (G2) together.
-
Install fixture body (J) to plate (H) and secure with screws (L). See diagram 1.
-
Remove finial (B) from cluster (D).
-
Remove shade (C) from packaging and install to cluster (D) using finial (B).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulbs into the sockets.
-
Place diffuser (A) onto the top of shade (C).
-
Remove protective cover (F) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>