VISUAL COMFORT KS 2008 Ellery Gros-Grain Bow Small Sconce Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT KS 2008 Ellery Gros-Grain Bow Small Sconce
Product Information
Product Name : Ellery Gros-Grain Bow Small Sconce
Item Number: KS 2008
Product Description : The Ellery Gros-Grain Bow Small Sconce is a stylish
light fixture designed to enhance the ambiance of any room. It features a
sleek design with a gros-grain bow accent, adding a touch of elegance to your
space.
Installation Requirements
This light fixture should be installed in accordance with all applicable, local installation codes. It is recommended to have it installed by a person familiar with the construction and operation of light fixtures, as well as the hazards involved.
Notice :
Inspect the item and its contents carefully before installation. If any damage
or defect is found, do not proceed with installation. Retain all packaging
material until installation is complete and approved.
Product Usage Instructions
-
Carefully remove all parts from the box and place them on a clean, soft surface.
-
Locate the mounting plate (B) attached to the fixture (E) and remove it by unscrewing screws (D).
-
Install the mounting plate (B) to the junction box and secure it using the provided mounting screws (C).
-
Wrap the fixture ground wire (bare copper) around the green grounding screw on the mounting plate (B) and tighten it securely.
-
Connect the fixture wires to the corresponding wires in the
junction box, following proper electrical wiring practices. -
Securely attach the fixture (E) to the mounting plate (B) using the screws (D).
-
If necessary, install a compatible bulb (not included) according to the bulb manufacturer’s instructions.
-
After installation, ensure that all connections are secure and free from any exposed wires.
Care Instructions
- Clean the fixture only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents, as they may damage the surface of the fixture.
- This product is listed and approved for use in the United States.
ASSEMBLY INSTRUCTIONS
Ellery Gros-Grain Bow Small Sconce
Item # KS 2008
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED
(NOT INCLUDED):
- Phillips Screwdriver
- Slotted Screwdriver
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove mounting plate (B) from fixture (E) by removing screws (D).
-
Install mounting plate (B) to the junction box and secure with mounting screws (C).
-
Wrap fixture ground wire (bare copper) around the green grounding screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (A).
NOTE: It is imperative that the fixture is grounded. -
Connect fixture neutral wire (white) to the supply neutral wire (usually white) using wire nut (A).
-
Connect fixture hot wire (black) to the supply hot wire (usually black) using the wire nut (A).
CAUTION : Do not reverse the hot and neutral connections. -
Make sure all wire connections are tight, then carefully tuck into the junction box.
-
Install fixture (E) to mounting plate (B) by securing with screws (D).
-
Put shade (F) onto the socket cup.
-
Install light bulb into the socket.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.