VISUAL COMFORT KW1022 Alessio Medium Floor Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
ASSEMBLY INSTRUCTIONS
Alessio Medium Floor Lamp
Item # KW1022
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install light bulbs into sockets.
-
Remove shade (B) from packaging, then align holes on shade ring with screws (E) on fixture body (C) and turn clockwise until locked in place. See diagram 1.
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Place diffuser (A) on the top of shade (B).
-
Remove protective plug cover (D) from the plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.