SMART WATCHES YP12573 Multi Function Sport LCD Watch User Guide

SMART WATCHES YP12573 Multi Function Sport LCD Watch
User Guide

BUTTONS

• The operation of buttons are indicated by using the letters shown in the llustration.
  

DISPLAY

• The screen shown in below;
  

ATTENTION

1. Never try to open the case or remove its back cover.
2. Do not operate buttons under water.
3. Should moisture appear inside the watch,have it checked immediately by your dealer. Otherwise it can cause erosion of the metal parts of the watch
4. Though the watch is designed to withstand normal use, you should avoid rough use or dropping the watch,
5. Avoid exposing the watch to temperature extremes.
6. Wipe the watch with dry, Soft cloth only. Avoid all owing it to come into direct contact with chemical materials, which can cause deterioration of the plastic parts of the watch.
7. Avoid to wear the watch in electromagnetic, static conditions.

MODE SELECTION

• Press “B” to change mode to made in the following Sequence:
  Timekeeping Mode ~ Alarm Mode~ Stopwatch Mode = Dual Time Mode.

TINEKEEPING

• 12/24H Format;
• Hour, Minutes, Seconds, Day of week, Date;
• 100 years Calendar (2000 ~ 2099).

ALARM

• Hourly tie signal:
• The alarm sounds at the preset time each day.

STOPWATCH

• 1/100 socong
• Measuring range: 000700 ~ 23:59’59”.

DUAL LTIME

• The time for other time zone.

BACKLIGHT

• The backlight that uses an EL (electro-luminescent) cause the display to glow for easy reading in the dark.

Use EL Backlight

• Inany mode, press “C”toilluminate the display about 3 seconds

TIMEKEEPING

12/24H Format

• In the timekeeping mode, press “A” to switch between 12/24H formats.

Calendar

• In the timekeeping mode, press and hold “D” to display: Year, Month, Date.

Time Setting

1. In the timekeeping mode,press and hold “A” until the seconds to flash (flashing indicated in set mode);
2. Press “D” to reset the seconds ;
3. Press “B” change to the next selection;
4. Press “D” to increase the number, press and hold to increase at high speed;
5. Repeat step 3 and 4, the selection in the following sequence: Seconds Hour — Minutes—Year — Month — Date;
6. Press “A” to exit the set state, after you set(The day of week is autom­atically displayed in accordance with year, month and date setting).
   

ALARM

Alarm and Chime

• In the alarm mode, press “D” to on/off the alarm and chime in the following sequences: Alarm & Chime off —Alarm on — Chime on—Alarm & Chime on.

Alarm Time Setting

1. In the alarm mode, press “A” the hour to flash(flashing indicated in set mode);
2. Press “D” to increase the hour, press and hold to increase at high speed;
3. Press “B” to select the minutes;
4. Press “D” to increase the minutes,press and hold to increase at high speed;
5. Press “A” to exit the set state, after you set.
   • The alarm sounds at the preset time each day for about 60 seconds, press any button to break it.

STOPWATCH

A Lap Time

1. In the stopwatch mode, press “D” to start the stopwatch;
2. To stop the stopwatch by pressing “D” again:
3. Press “A” to reset the stopwatch

DUAL TIME

Dual Time Setting

1. In the dual time mode, press “A” the hour to flash (flashing indicated in set mode);

2. Press “D” o increase the hour, press and hold to increase at high speed;

3. Press 8″ to select the minutes;

4. Press D” to change the minutes(press once change 30 minutes);

5. Press “A” (o exit the set state, after you set.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>