BEL AIR LIGHTING 71733 Meadowlark 21 Inch 3-Light Black Vanity Light with Clear Glass Shades Instruction Manual
- June 12, 2024
- BEL AIR LIGHTING
Table of Contents
BEL AIR LIGHTING 71733 Meadowlark 21 Inch 3-Light Black Vanity Light with
Clear Glass Shades
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there Is a defect In the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by tumlng o• the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
Parts & Hardware
Assembly Instructions
Model# 71714
-
STEP 1
Use the mounting screws to attach the mounting unit to the junction box
-
STEP2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape
-
Connect Clear, Brown, Gold or Black Parallel Wirewi1houttracer (round&smooth)orBlackFixture Wireto:
Black or Red Supply Wire or Insulated Wire (other than green) with copper conductor. -
Connect Clear, Brown, Gold or Black *Parallel Wire with tracer (square& ridged)orWhiteFixture Wireto:
White Supply Wire or Insulated Wire(otherthangreen)with silver conductor
-
-
STEP3
Secure the fixture to the mounting unit with the cap nuts.
Install bulbs type E12 60W (not included).
Place the shades over the each socket cap.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>