BEL AIR LIGHTING 51414 Carmel 3-Light Black Outdoor Pendant Light Instruction Manual
- October 30, 2023
- BEL AIR LIGHTING
Table of Contents
PENDANT LIGHT (CHAIN) Assembly Instructions Model:51414
51414 Carmel 3-Light Black Outdoor Pendant Light
CAUTION
- **** Inspect the insulation for any cuts, abrasions or exposed copper that may have resulted during shipping .If there is a defact in the wire ,do not attempt insallation .
- Befor starting installation of this fixture or a previous fixture ,disconnect the power by turning off the circuit breaker or by removing the fuse at fuse box.
TOOLS REQUIRED
STEP 1
Attach the end of the chain to the loop on the fixture.
STEP 2 Use the mounting screws to attach the mounting unit to the junction box
STEP 3 Pass the chain and the branchwires through the screw collar ring and canopy. Feed the branchwires through the pipe nipple on the mounting unit and attach the end of the chain to the mounting unit.
STEP 4 Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape
STEP 5
Secure the canopy to the mounting unit with the screw collar ring.
STEP 6 Fit the sleeves over the lamp holder.Place the fixture over the glass and secure it with Screws. Install the bulbs E12 60W MAX TYPE B(not included).