GLFERA HD20205W LED Table Lamp Instruction Manual
- June 15, 2024
- GLFERA
Table of Contents
HD20205W LED Table Lamp
Product Name:HD20205W
Power: 7 W
Input: DC 5V 2.4A
LED:44PCS
Wireless Charger: 5W
USB Output: 5W
Color Temperature:3000-6000K
Lumen:400LM
OPERATING INSTRUCTION:
-
Insert the DC interface of the USB cable into the one at the back of the lamp-post (Please use appointed adaptor) ;
-
The USB is on the left of the DC interface(5V/1 A);
-
Touch slightly to control On/Off ;
Touch to adjust the color modes(Warm, Cold, Mix light); stepless dimming to adjust the brightness(5 levels), dark to light from left to right.
Wireless Charger Instruction:
Wireless charger suitable for all kinds of mobile phones with wireless
charging function(5V/1A).
Put the phone on the wireless charging pad of the desk lamp, and the phone
will be charged automatically. While charging, you need to adjust the position
of the mobile phone. If the green light of the indicator is on, means you have
charged the phone successfully, otherwise you need to adjust the position.
Warning: Only one of the two inputs can be selected, such as: when wireless
charging, USB does not allow charging, vice versa.
5. The adjustable gooseneck can be rotated 180° vertically and 350°
horizontal. ;
Warning: The LED bulb is not replaceable. This desk lamp should not be used in a plane above 6 degree.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>