J-TECH DIGITAL JTD-2987 Wall Plate Extender User Manual

June 12, 2024
J-TECH DIGITAL

J-TECH DIGITAL JTD-2987 Wall Plate Extender

J-TECH DIGITAL JTD-2987 Wall Plate Extender

Introduction

The wall plate is a 2×1 switcher and CAT transmitter with HDMI and USB-C inputs. It features a US one-gang enclosure for Decora-style wall plate openings with interchangeable black and white wall plates and faceplates. Support video resolution up to 4K2K@50/60Hz 4:4:4. CAT6 output can extend video transmission distance up to 164ft / 50m.

The product is remotely powered by the receiver or other CAT-equipped devices via POC.

Features

  • Compliant with HDMI 2.0b, HDCP 2.2 and Display Port 1.2a
  • HDMI input supports 18Gbps video bandwidth;
  • USB-C input supports 5.4Gbps video bandwidth
  • Video resolution up to 4K2K@50/60Hz 4:4:4
  • CAT6 output can extend video transmission distance up to 164ft / 50m for 4K@24 or 115ft / 35m for 4K@60 444 via a single CAT5e/6 cable
  • Support 3D, HDR10 and Dolby Vision
  • HDMI audio formats support LPCM, Dolby Digital/Plus/EX, Dolby True
  • HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
  • Support HDMI and USB-C input
  • With USB-C charging port
  • US one-gang enclosure for Decora-style wall plate openings
  • Input signal selection supports automatic mode and manual mode
  • Support POC function (only from Receiver to Transmitter)
  • Available in white or black coating

Package Contents

  • 1× 18Gbps CAT 50M with USB-C/HDMI Wall Plate Transmitter
  • 1× User Manual

Specifications

Technical

HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
DP Compliance| Display Port 1.2a
Video Bandwidth| USB-C: 5.4 Gbps
HDMI: 18 Gbps
Video Resolution| 480i~1080p50/60Hz, 4Kx2K@24/30Hz, 4k2k@60Hz
Color Space| RGB, YCbCr 4:4:4 / 4:2:2, YUV 4:2:0
Color Depth| 8/10/12-bit (1080P@60Hz) 8-bit (4K@60Hz)
HDR| Support
HDMI Audio Formats| LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
Transmission Distance| Max distance (4K@24) : 164ft / 50m over CAT5e/6 Max distance (4K@60) : 115ft / 35m over CAT5e/6
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection
Transmitter| Inputs: 1 x HDMI Type A [19-pin female] 1 x USB-C
Outputs: 1 x CAT6 OUT [RJ45, 8-pin female] 1x USB-C (only for charging)
Control: 1x FW [Micro USB, Update port]
Receiver| Input: 1x CAT IN [RJ45, 8-pin female] Output: 1x HDMI OUT [Type A, 19-pin female] Controls: 1x IR IN [3.5mm Stereo Mini-jack] 1x SERVICE [Micro USB, Update port]
Mechanical

Housing| Metal Enclosure
Color| White / Black
Dimensions| Wall plate: 33.3mm [W] x 65.7mm [D] x 68.7mm [H] Faceplate: 69.9mm [W] x 3mm [D] x 114.3mm [H] Receiver: 88mm (W) × 61mm (D) × 18mm (H)
Weight| Wall plate: 195g, Receiver: 155g
Power Supply| POC (only from Receiver to Transmitter)
Power Consumption| Wall plate: 3W (Max), Receiver: 3.72W (Max)
Operating Temperature| 32 – 104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)

Product Dimensions

Product Dimensions

Operation Controls and Functions

Transmitter Panel

Operation Controls and Functions

No. Name Function Description
1 Power LED The power LED indicator will illuminate in green when the

product is powered on, and red when the product is on standby.
2| HDMI LED| When the HDMI input port is active and the HDMI

signal is detected, the green LED will be on.

3| USB-C LED| When the USB-C input port is active and USB-C signal is detected, the green LED will be on.
4| HDMI port| HDMI input port, connect to HDMI source device.
5| USB-C port|

  1. USB-C signal input port.
  2. Charging port for devices with USB-C port.

6| CHARGE port| Connect this port to power supply, then the USB-C port will power the connected device.
7| SOURCE button| Used to switch HDMI / USB-C input signal.
8| CAT6 OUT| Connect to the CAT IN port of Receiver with a CAT5e/6 cable.
9| FW port| Firmware update port.

Receiver Panel

Operation Controls and Functions

Note:

This transmitter supports automatic/manual mode for source signal input. In manual switching mode, press the SOURCE button to select HDMI/ USB-C input source.

In automatic switching mode, the last connected or the currently connected source signal will be selected automatically; When both HDMI and USB-C ports are connected to active signal, HDMI signal input is preferred.

Application Example

Application Example

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts and Labor (18) Months”, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.

During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis- adjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTAIL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

Customers Support

Logo

WWW.JTECHDIGITAL.COM
PUBLISHED BY J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL: SUPPORT@JTECHDIGITAL.COM

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

J-TECH DIGITAL User Manuals

Related Manuals