noise ColorFit Ultra 2 Smart Watch User Manual

noise ColorFit Ultra 2 Smart Watch

What’s in the box

Get Started

• Activity
• What’s in the box
• Workouts
• Watch overview
• SpO2
• Heart Rate
• Charge the watch
• Sleep
• Turn the watch on and off
• Breathe
• Weather
• Watch Navigation:
• Screen Navigation
• Button
• Music
• Reminders

Set Up

• Stopwatch
• App setuup
• Alarm
• World Clock
• Pair the Watch
• Watch Faces
• General Device Information and Tips
• Stocks
• Regulatory and Safety Information
• Stress
• Flashlight
• Customer support
• Settings
• Cycle Tracker

Charging the ColorFit
Uitra 2 Smart Watch Before using your ColorFit Ultra 2 for the first time, charge the battery to its full capacity. Use the charging cable provided with the watch to charge.On a full charge, ColorFit Ultra 2 can last up to 9 days.
Note: The battery life and time to fully charge your device may vary as per usage and other factors.

To charge ColorFit Ultra 2

• Plug the USB cable into a power adaptor. Plug the power adaptor into an electrical socket (Power adaptor not included).
• Place the magnetic charger on the magnetic charging points of the watch.
• While your watch is charging, the screen will show its progress.
• Once the battery is fully charged, remove the charger.

Power On
Press and hold the side button for a few seconds to turn on the watch.

Power Off
Press and hold the side button for a few seconds, select Shut down and confirm to power off.

Waking Up the Watch
To preserve battery, the watch screen turns off when not in use. To turn the screen back on, you can wake up the watch by:
Pressing the side button Turning on the Wrist sense

Watch Navigation
The ColorFit Ultra 2 smartwatch has a 1.78″ AMOLED display touch screen. Navigate the watch by tapping on the screen, swiping side to side, up and down and pressing the side button.

Home Screen Navigation
The home screen is the watch face.
From the home screen:
Swipe left or right to access shortcuts.
Swipe up to go to quick settings menu.
Swipe down to check your message notifications.

Button Navigation
Press the side button to turn on the watch display.
Press the side button again to go to the main menu.

Setup

Before pairing, make sure that your smartphone and smartwatch are next to each other. The app will ask for personal information such as height, weight and sex to calculate your stride length, distance covered, calorie burn rate. Turn on Bluetooth and the location on your mobile device.
In your smartphone, download the NoiseFit app from the Play store or the App store and install it.
Create an account or login using an existing account.
Note: Ensure that your smartphone is running on Android 4.4+ or iOS 9+ and is connected to mobile data or a Wi-Fi network.

Pair the Watch

• Open the NoiseFit app and allow the
• Bluetooth and GPS positioning to be turned on.
• Feed in your personal information and health goals in the app.
• Go to ‘Pair Device’ page in the app, select the watch name and MAC address and link the watch Or you can follow these steps:

Turn on the watch.
Scan the QR code from the NoiseFit app on your phone. Select Pair with device and wait for it to pai.

Watch Features

Watch Face
You can switch between different watch faces in the watch, choose and download cloud-based, animated watch faces or create your own watch faces in the NoiseFit app.

Changing the Watch Face
Give your screen a personalised style by changing or customising the watch face from the NoiseFit app or the watch.

On the Watch
Touch and hold the home screen. Swipe and choose from the watch faces.

In the App
Go to watch faces, select the watch face of your choice and tap save to change the watch face

Settings

• Brightness
  Set the brightness level as per your preference.

• Vibration
  Set the vibration level as per your preference.

• Wrist Awake
  Turn on the wrist awake and set the auto screen off as per your preference.

• Smart DND
  Choose to turn on the smart DND side DND function.
  Note : The smart DND mode will be activated once the watch is removed from the wrist.

• Always on Display
  Go to Always on Display and turn it on.
  Note: Choosing to turn on the always on display will affect the battery life.

• QR code
  Scan the QR code to connect with the app.

• Device info
  You will find all the information related to the device here, including device name, Bluetooth name and version.

• Reboot
  Go to Reboot to restart your watch.

• Power oft
  Go to Power offt to power off your watch.

• Reset
  You can choose to reset. Do note if you choose to reset, all your data and settings will be erased.

WATCH FEATURES

Activity
You can check your daily activity progress in terms of the steps taken, distance covered, calories burned and active time.
Heart Rate
ColorFit tra 2 supports47 near ta rsency in the app setting dsurement
To measure your heart rate in real time, go to the Heart Rate monitor. You can view the all-day data on the watch and app.
Note: Make sure your arms and wrists are still and there is no space between your watch and the wrist.
sleep
You can view your most recent sleep record and sleep quality in various sleep stages in the NoiseFit app. The feature will measure the device records of the user’s sleep cycle, sleep states (light sleep and deep sleep), wake time and REM.
Sp02
ColorFit Ultra 2 supports viewing of the highest and lowest values of Blood Oxygen level of the day and the measurement data throughout the day. To measure your blood oxygen level real time, go to the Blood Oxygen monitor and let it measure.
Note: Make sure your arms and wrists are still and there is no space between your watch and the wrist.
Stopwatch
A stopwatch can be set on the watch. You can also set lap times in the stopwatch.
Stress
Colorfit Ultra 2 supports 24-hour stress level measurement and viewing of all- day measurement data.
To measure the stress levels real time, go to the Stress Level feature and wait for it to measure.
Note : Make sure your arms and wrists are still and here is no space between your watch and the wrist.

Breathe
The Breathe feature helps you adjust your breathing rhythm as per your convenience.
You can choose from 3 speeds (fast, moderate and slow) to adjust your breathing duration. After the session, you can also see the change in the beats per minute.
Go to the Breathe feature, choose the time duration and speed and tap on start to enter the cycles of breathing and inhalation.
Note: During this period, if you swipe right or press a button, breathing is interrupted and you can choose to practice again or complete the cycle.

Weather
ColorFit Ultra 2 supports 7-day weather viewing in a location of your choice as long it is synced with the NoiseFit app. You can view today’s current weather and for the next 6 days. Open the Weather app on your watch and change the location to see the weather of your current location.

Music
You can control your favourite songs and podcasts that play from your phone, right on your wrist as long as the watc is connected with the NoiseFit app in yourphone. You can play/pause music, go to next/previous track and increase/decrease volume.

Stocks
You can update yourself with stock market information with this feature. Go to app and add Stock information

Flashlight
You can use this feature to turn on the screen brightness and see your surroundings better. Go to the Flashlight. Tap to turn on.

Calculator
You can use the Calculator feature to do simple calculations.
Go to the calculator. Feed-in the digits and calculate.

Alarm
You can add, delete, and enable/ disable alarms on the watch. You can set alarms in the NoiseFit app and it will sync with the watch. You can also label alarms to identify them.

Timer
You can set a timer with a pre-set duration on the watch and the timer will remind you when the time is up.
Go to Clock. Choose Timer and set it as per your requirement.

Cycle Tracker
You can manage your cycles better by predicting your cycle based on recorded data. Fill in the cycle length, duration, and the date of your period and set.
Note: This feature is available only for females.

Device Information and Tips

Device Information

• How dol find my watch’s current firmware version?
• The ColorFit Ultra 2 Smart Watch contains You can find the watch’s current firmware the following:
• 1.78″ AMOLED Display Touch Screen Yeonitor on the watch. Go to Settings on the Noiseit app. Select Device information, choose
• Check tor updates and update it any update is available.
• .3ATM Waterproof
• 60 Sports Modes
• 22mm Quick Change Pins

How dol save battery?
Follow these simple steps to save ColorFit The ColorFit Utra 2 smartwatch stores your activity data for up to / days in between the time you sync your watch to the Noisekit app. Activity data includes your steps, distance, calories, active minutes, heart rate, sleep duration, and workout
Itra: Minimise the screen brightness and Limit the notification you receive from the NoiseFit app. data. We recommend syncing the watch to the

App daily.
How does the watch estimate how many calories have been burned?

Tips
ColorFit Ultra 2 estimates now many does You’ve Durned Dased on the

How do I update my ColorFit Ultra 2?
pour acc u wen you set up your account. You can update your ColorFit Ultra 2 via the NoiseFit app. Go to My Profile and select Check for updates.

How dol change my activity goals?

Regulatory and Safety Information

You can do it through the NoiseFit app. Go to My Profile. Go to Setup and select My Objectives. Change your goals and confirm. USA: Federal Communications Commission

(FCC) Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

How do l log my weight?
You can log in your weight the first time you set up your NoiseFit app. However, you can update the weight later via the NoiseFit app. Go to My Profile, select Personal Information and change or update your weight. You can update your birthday, height, country, and email id as well This device may cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Disposal and Recycling Information
Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return the electrical and electronic device at the Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our equipment that generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. environment. If this 76 equipment does cause harmful interference to radio or television reception, which can be determined by turning the equine t h interference by one or more of the In some cases, prolonged use of products may cause skin irritation. Prolonged contact may continue irritation. keep the watch and watchband clean and dry. Don’t wear it too tight and follow the measures give your wrist a rest by removing the watch after an extended period of wear. If you feel soreness, tingling, numbness, Durning or stillness in your hands or wrists while or after wearing the watch, please immediately discontinue use.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
Consult the dealer or an experienced radio/TV technician for help. The Colorit Ultra 2 smartwatch is not a toy tch be a choking hazard and aro oud use by small children or pets. Unless otherwise specified, devices and services are not medical devices and are not intended to diagnose, treat, cure or prevent any disease. We develop products and services to track daily activity and wellness information as accurately as possible. The accuracy of devices are not intended to be equivalent to medical devices or scientific measurement devices.

Safety Instructions

• Do not disassemble the battery on
• Do not use your product in a sauna or steam your own.
• Do not expose ColorFit Ultra 2 to extremely high or low temperatures.
• Charge the battery in a cool, ventilated room. room.
• Do not dispose of batteries in the fire as that may cause an explosion. Dispose of used batteries in accordance with your local regulations. Do not dispose of it as household
• Do not open, crush, bend, deform, puncture or shred secondary cells or batteries. In the event of a battery break or leak, prevent battery liquid contact with skin or eyes. If this happens, immediately flush the areas with water
• (DO NOT RUB THE EYE) or seek medical help.
• Keep the batteries out of children’s reach and in a safe place to prevent danger.
• Do not place the batteries in the water.
• Do not short-circuit. Short-circuiting may damage the battery. Short-circuiting can occur when a metallic object, such as coins, causes the direct connection of positive and negative terminals of the battery. waste.
• Use only the charging cable supplied to charge the battery. Do not charge for more than 24 hours.
• Do not attempt to repair or maintain the watch yourself, service and maintenance should be performed by authorized technicians only. Any device failure should be referred to our after-sales service personnel.
• To prevent device damage, accessory damage, and device failure, always protect the device against strong impact or shock.

Customer Support
If you experience any problem with the watch, it may be fixed by restarting your watch. For any assistance, please reach out to us at support.gonoise.in

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warming Changes or modifications not expressly approved by the party responsible for compliance could aid the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warming statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>