MICMOL Vision Series HD Seamlessly Blends Lighting User Guide
- June 1, 2024
- MICMOL
Table of Contents
MICMOL Vision Series HD Seamlessly Blends Lighting
Product Information
Specifications:
- Product Name: Vision (HD) Series
- Compatibility: iOS and Android
- Power Cable (AC)
- Power Cable (DC)
- Control: Bluetooth-enabled
Product Usage Instructions
Vision (HD) Series Setup Overview:
- Adjust the height of the Pro Stand and tighten the screws.
- Fix the Bracket to the Vision.
- Optional: Install the hanging kits – Fixed hanging.
App Connecting Overview:
To connect the Vision Series to the iMicMol app:
- Download the iMicMol app from the App Store or Google Play.
- Pair your device with Bluetooth turned on.
- Factory Reset / Mode Switch: Hold for 3 seconds to factory reset when connecting the Vision (HD) for the first time.
- Controls: Hold for 3 seconds for Factory Reset, Triple-Press for Linkage Mode – Receiver Mode.
- Open the iMicMol app to Add Device.
- Choose Auto Scan, and the device will appear automatically.
- Connect and set your light.
- Turn ON to control your light.
Important Handling Information:
- Attention: Never put the light and the smart controller in water as it can be dangerous and damage your light.
- Warning: Do not touch the light’s body when it is working as it may generate heat and make your hands uncomfortable.
- Warning: Ensure all cables are connected before plugging into electricity to avoid damaging your light.
MicMol and the Environment:
MicMol recognizes its responsibility to minimize the environmental impact of
its operations and products.
Warranty Information:
For warranty queries, refer to your Warranty Card with details of Product
Name, Model, Dealer Name, Dealer Tel, Purchase Date,User Name, and User Tel.
FAQ
Q: Can I control the Vision Series lights with both iOS and Android
devices?
A: Yes, the Vision Series lights are compatible with both iOS and Android
devices. Simply download the iMicMol app from the respective app stores.
Q: How do I reset the Vision Series light to factory settings?
A: To reset the light to factory settings, hold the Factory Reset / Mode
Switch button for 3 seconds when connecting the Vision (HD) for the first
time.
Congratulations on purchasing your Vision Series
Read this guide to get started to installing and setting your lighting
Overview
Vision (HD) Series Setup Overview
How to install the Pro Stand and Hanging Kits
- Adjust the height and tighten the screws
- Fix Bracket to the Vision
- Installing the hanging kits (Optional)
App Connecting Overview
Download APP
Compatible with iOS and Android.
Search “iMicMol” from App Store and Google Play to download directly.
Controls
Pairing (Please make sure your Bluetooth is turn on. )
-
Download and open iMicMol APP to Add Device
-
Choose “Auto Scan”, the device will appear automatically
-
Connecting now….
-
Waiting for connect to 100%
-
Great!
You can set your light now. -
Turn “ON” to control your light
Information
ATTENTION: Never put the light and the smart controller in the water. Doing so will dangerous and damage your light.
WARNING:
- Do not touch the lights body when it working which will generate heat and may let your hands uncomfortable.
- Make sure all the cables are connected before plug to electricity or will damage your light.
Important Handling Information
NOTICE: Failure to follow these handling instructions could result in damage to your Light or other property.
Carrying your Light before you move your Light, shut it down and disconnect all cables and cords connected to it. Using power cord Never force a connector into a port. Don’t put the power cord into your tank when it connected. When you Setup your Light please make sure that it locate power supply where it will not be exposed to any water or moisture.
Mount your power supply where it won’t get wet. Include a “drip loop” – a tied loop of cord hanging down below the level of the electrical outlet. That way, if water happens to run down the cord from the tank, it will drip off onto the floor rather than into the outlet. Drip Loops should always be used to help prevent water from traveling along the cord and coming into contact with an electrical outlet. Drip loops must always be below the level of the outlet. If the plug or outlet does get wet, DO NOT TOUCH the cord.
Storing your Light If you are going to store your Light for an extended period
of time, keep it in a cool location (ideally, 71° F or 22° C).
When cleaning the outside of your Light, first shut down your Light and unplug
the power cord. Then use a damp, soft, lint-free cloth to clean the lamp
exterior. Avoid getting moisture in any openings. Do not spray liquid directly
on the lamp. Do not use aerosol sprays, solvents, or abrasives that might
damage the finish.
MicMol and the Environment
MicMol. recognizes its responsibility to minimize the environmental impact of
its operations and products.
Warranty
MicMol warrants all MicMol products to be free from manufacturing defects for one year from the original purchase date when purchased through an authorized MicMol retailer. This warranty does not cover any damages caused by misuse, neglect, alterations or improper handling/transport/maintenance/installation. Physical damages are not covered by warranty. MicMol does not cover personal injury, personal loss, or other damages associated with the use of our products. In order to request warranty service, please email us at [email protected]. A purchase receipt is required for any warranty service. Products requiring warranty service must be returned to MicMol or authorized MicMol retailer. You are responsible for the cost of shipping a warranty claim to MicMol and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exchanged at our discretion and returned to you. Thank you very much.
Warranty Card
- Product Name:
- Product Model:
- Dealer Name:
- Dealer Tel:
- Purchase Date:
- User Name:
- User Tel:
© 2012~2024 MicMol Limited. All rights reserved.
MicMol, the MicMol Logo, Vision, Air Pro, Master, THOR, Aqua CC, Aqua mini,
Aqua Pro, Aqua Max, Aqua Air, BloomBee are trademarks of MicMol registered.
www.micmol.com – V002-242002-A Printed in China.