BEL AIR LIGHTING 51390 Outdoor Wall Light Sconce Lantern Instruction Manual
- October 30, 2023
- BEL AIR LIGHTING
Table of Contents
WALL LANTERN
Assembly Instructions
Model: 51390
51390 Outdoor Wall Light Sconce Lantern
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning of the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
STEP 1
Use the mounting screws to attach the mounting unit to the junction box
STEP 2
Make the electrical connection from the junction box to the fixture. Connect
the ground wire to the mounting unit using the preinstalled green ground
screw. Then, connect the positive, negative and ground wires with the supplied
wire nuts. Secure with electrical tape
Connect Clear, Brown, Gold or Black Parallel Wire without tracer (round &
smooth) or Black Fixture Wire to:| Connect Clear, Brown, Gold or Black
*Parallel Wire with tracer (square & ridged) or White Fixture Wire to:
---|---
Black or Red Supply Wire or Insulated Wire (other than green) with copper
conductor.| White Supply Wire or Insulated Wire (other than green) with silver
conductor
STEP 3
Secure the fixture to the mounting unit with the cap nuts; Place the glass
over the fixture and secure it with socket ring by E26 socket Handle;
Install the bulb E26 60W MAX(not included).