YOTON YB01 Baby Monitor Infrared Night Vision Monitor User Guide
- June 15, 2024
- Yoton
Table of Contents
YOTON YB01 Baby Monitor Infrared Night Vision Monitor
Specifications
- Signal Range: 15~25 meters (may vary)
- Transmission Technology: 2.4GHz FHSS
- Power Source: Rechargeable batteries (parent unit), Adapter (baby unit)
Product Usage Instructions
Signal Range
The signal range of the Yoton Baby Monitor indoors is approximately 15 to 25 meters. However, please note that this range may vary.
Keep in mind that the signal transmission is in a straight line and can be affected by thick walls and electronic products in the vicinity. If you experience a very short signal range, please try the following:
- Keep the baby monitor with camera away from electronic products.
- Use the monitor in an environment that avoids interference from other signals.
- If the above methods do not improve the signal range, please contact us for further assistance.
Setting the Screen to Always On
If you would like to set the screen to always on, follow these steps:
- Turn off VOX mode: Go to Settings > System Mode > Normal Mode > OK.
- Extend the time of the display screen staying lit: Go to Settings > LCD backlight > Time(Sec) > Increase the time up to 100 seconds.
Battery Saving Tips
To extend the battery life of your Yoton Baby Monitor, consider the following:
- Turn on Vox mode to reduce power consumption.
- Lower the brightness of the display screen.
- Shorten the time for the screen to stay lit (minimum 20 seconds).
Working Without Internet
Yes, the Yoton Baby Monitor works without internet. It utilizes 2.4GHz FHSS technology to transmit images and audio. This method ensures safety and portability. FHSS is a technique that rapidly changes the carrier frequency between distinct frequencies to avoid interference and prevent eavesdropping.
No Sound from the Baby on the Parent Unit
If you can’t hear the sound of the baby on the parent unit, try the following:
- Turn up the volume on the parent unit.
- Raise the sensitivity of the Vox mode.
Night Vision Troubleshooting
If the night vision is not working, try the following:
- Ensure that the baby terminal is powered on. Check if the indicator light on the baby terminal is illuminated, indicating a connected power supply.
- Make sure the environment where the baby is located is dark enough. Turn off any additional lighting sources, such as night lights, and test the night vision function again.
- Minimize obstacles and maintain a distance of at least ten meters between the baby unit and the parent unit. Stay away from electronic devices like routers that transmit wirelessly, as they may cause signal interruption or interference.
Power Source for Camera
The Yoton baby monitors (parent unit) come with rechargeable batteries that can be fully charged and used without the need for a constant adapter connection.
However, the baby camera (baby unit) requires an adapter to be connected at all times for its operation. The package includes two adapters (over 1.5 meters each) for the baby monitor and the camera, respectively.
Screeching Sound from the Monitor
If the monitor emits a screeching sound, try the following:
- Keep the product away from the router, microwave ovens, battery-operated remote controls, and other electronic devices that use 2.4GHz, as they can interfere with the signal.
- Maintain a distance of at least one meter between the baby unit and the parent unit to avoid signal interference caused by proximity.
FAQ (Frequently Asked Questions)
Q: What is the signal range of Yoton Baby Monitor?
A: The signal range of Yoton Baby Monitor indoors is about 15 to 25 meters. However, there may be some variation in the actual range due to factors such as walls and electronic interference.
Q: How can I set the screen to always stay on?
A: To set the screen to always stay on, follow these steps:
- Turn off VOX mode by going to Settings > System Mode > Normal Mode > OK.
- Increase the time for the display screen to stay lit by going to Settings > LCD backlight > Time(Sec) and adjusting it up to 100 seconds.
Q: How can I extend the battery life of the monitor?
A: To extend the battery life of the monitor, try the following:
- Turn on Vox mode to reduce power consumption.
- Lower the brightness of the display screen.
- Shorten the time for the screen to stay lit (minimum 20 seconds).
Q: Does the Yoton Baby Monitor require an internet connection to work?
A: No, the Yoton Baby Monitor works without internet. It uses 2.4GHz FHSS technology to transmit images and audio securely and does not rely on internet connectivity.
Q: How can I fix the issue of not hearing the baby’s sound on the parent unit?
A: If you can’t hear the sound of the baby on the parent unit, try the following:
- Turn up the volume on the parent unit.
- Raise the sensitivity of the Vox mode.
Q: What should I do if the night vision is not working?
A: If the night vision is not working, try the following:
-
Check if the baby terminal is powered on through the charger.
If the indicator light on the baby terminal is on, it means that the power supply is connected. -
Ensure that the environment where the baby is located is dark enough by turning off additional lighting sources such as night lights.
-
If there is signal interruption or interference, use the product within a range of ten meters, minimize obstacles between the baby end and the parent end, and stay away from wireless transmitting electronic devices like routers.
Q: Can the camera be powered by rechargeable batteries?
A: No, the camera (baby unit) of the Yoton Baby Monitor requires an adapter to be connected at all times for its operation. The package includes an adapter specifically for the camera.
Q: Why does the monitor emit a screeching sound?
A: The screeching sound can occur due to signal interference. Keep the product away from devices like routers, microwave ovens, battery-operated remote controls, and other electronic devices that use 2.4GHz. Also, maintain a distance of at least one meter between the baby unit and the parent unit to avoid proximity interference.
Questions & Answers
What is the signal range of Yoton Baby Monitor?
The signal range of Yoton Baby Monitor indoor is about 15~25 meters. （There will be a certain difference）. PS: Since the signal transmission is in a straight line, it will be affected by thick walls and electronic products around the product. If the signal range is very short, please keep the baby monitor with camera away from the electronic products, or use it in an environment that avoids interference from other signals . If the above methods do not improve, please contact us.
I would like to set the screen to always on, how to do?
Turn off VOX mode: Settings-System Mode-Normal Mode-OK b. Extend the time of light-up the display screen: Settings-LCD backlight-Time(Sec)-up to 100 sec.
How do you turn off display screen so battery last longer?
a. Please turn on the Vox mode; b. Please lower the brightness of the display screen; c. Please shorten the time of light-up the screen. (lowest 20s.)
Does it work without internet?
a. Yoton baby monitors (parent unit) are rechargeable batteries that are fully charged and can be used without the need to always have an adapter connected; b. But the baby camera (baby unit) requires an adapter to be connected at all times in order to use it; c. In the package we include 2 adapters (over 1.5m) for the baby monitor and the camera respectively.
The monitor emits a screeching sound to the ear.
a. The product signal interfered. We suggest you keep the product away from the router, microwave ovens, battery operated remote controls and other electronic devices that use 2.4GHz; b. The distance between the baby unit and the parent unit are too close. We recommend that you maintain a distance of at least one meter between the baby unit and the parent unit.
Can't hear the sound of the baby on the parent unit?
a. Turn up the volume on the parent unit; b. Raise the sensitivity of the Vox mode.
Night vision not working?
a. The baby terminal is not powered on. It is recommended that you check whether the baby terminal is powered on through the charger. If the indicator light on the baby terminal is on, it means that the power supply is connected; b. The environment where the baby is located is not dark enough, so the threshold for turning on the infrared night vision light has not been reached. It is recommended that you turn off the lighting sources such as night lights in the room at night, and then test the night vision function of the product; c. If the connection signal is interrupted or interfered, we recommend that you use the product within a range of ten meters, minimize obstacles between the baby end and the parent end, and stay away from electronic devices such as routers that transmit wirelessly.
Is the camera also powered by rechargeable batteries?
a. Yoton baby monitors (parent unit) are rechargeable batteries that are fully charged and can be used without the need to always have an adapter connected; b. But the baby camera (baby unit) requires an adapter to be connected at all times in order to use it; c. In the package we include 2 adapters (over 1.5m) for the baby monitor and the camera respectively.
Image frozen.
a. The connection signal is not good. We suggest you use the product within 25 meters to minimize obstructions between the baby's end and the parent unit. b. The connection signal has interfered. We recommend that you use 2.4GHz electronic equipment away from the router, microwave ovens, battery operated remote controls, etc. c. The battery of the parent unit is flat. We suggest you try using it after fully charging the battery.
bm.support@yoton.co
Yoton Baby Monitor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>