KSIX LCAUTWMINI02N Wireless Earphone User Manual

: June 12, 2024
: KSIX

Table of Contents

Technical information
In the box
CONNECTION
HOW TO USE
CHARGE
Maintenance recommendations
Safety information
Electronic and electrical devices disposal
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LCAUTWMINI02N Wireless Earphone
Wirless Earphone
User manual
LCAUTWMINI02N

Technical information

Connectivity Bluetooth 5.0
Hands-free proﬁle: HSP, HFP, A2DP, AVRCP
Built-in microphone
Driver unit: 10 mm
Operation range: 10 m – 15 m
Frequency range: 2.402 GHZ ~ 2.480GHZ
Impedance: 32 Ω
Sensitivity: -42dB
Battery capacity: 50mAh (earphones)/ 400mAh (charging case)
Li-Polymer Battery
Play time: 3 – 4 hours (medium volume)
Battery charging time: 40min / 1 – 2 hours
Micro USB-USB cable included
Maximum power: 5mW
Bluetooth frequency range: 2400 mHz – 2485 mHz
Earphones frequency range: 20 – 200 mHz

In the box

1 x earphones
1 x charging case
1 x USB charging cable

CONNECTION

ON/OFF
After opening the charging case, the earphones will turn on automatically.
Put the earphones into the charging box and close it for shutting down the earphones.
Pairing
After being taken out from the charging case, the earphones will turn on automatically.
Turn on the smartphone’s Bluetooth and search the Bluetooth device TWINS PRO. Then, click “Connect”. A voice prompt saying “Connected” will sound once the connection is completed.

HOW TO USE

– Play/Pause: touch the left or right earphone once gently to play or pause the music.
– Volume: touch twice gently the left earphone to decrease the volume. Touch twice quickly the right earphone to turn up the volume.
– Previous/Next song: touch three times gently the left earphone to decrease the volume. Touch three times quickly the right earphone to turn up the volume.
– Answer/Hang up a call: touch the left or right earphone once to answer the call.
Touch again the left or right earphone to hang up.
– Reject a call: touch the left or right earphone for 2 seconds to reject the call.
– Voice assistant: touch the left or right earphone for 3 seconds to active the voice assistant.

CHARGE

Charge the case completely before using the earphones for the ﬁrst time.
Charging case
a) Use the type-c charging cable included in the box to charge the case.
b) The 4 LED blue lights in the case indicate the charge level:

LED1 ﬂashing: charge level <25%
LED1 always on + LED2 ﬂashing: charge level 25% ≤ 50%
LED1 y LED2 always on + LED3 ﬂashing: charge level 50% ≤ 75%
All LED lights always on: fully charged 90% – 100%

Earphones
When the battery is running low, you will receive a warning sound and the red LED will ﬂash. The earphones will turn off once the battery will run low completely. In this case:
a) Put the earphones in the case.
b) When charge starts, a red LED will be activated and turned off once charge is completed.

Maintenance recommendations

Regularly clean the earphones with a dry cloth.
Avoid breaking the earphones. Do not put objects over them.
Keep the earphones connectors and buttons free from dust, dirt, lint, etc.
If the earphones include a cable do not pull from it to unplug them.
Keep the earphones always in a dry place, away from humidity.
When not using the earphones or earphones, store them in a place free from dust, dirt, lint, liquids, etc.
Do not pull the earphones earbud tip excessively. The earbud tip may tear.

Safety information

Please read the following instructions.
Keep away the earphones from heat sources (ﬁre) and from humidity (water and other liquids).
Do not attempt to open the earphones. You might damage them.
Do not leave the earphones in contact with ﬂammable materials.
Do not throw the earphones into ﬁre.
If the earphones are wet or damaged do not plug them into your multimedia device.
Keep them away from children.
Do not plug the earphones into incompatible objects or devices.
Do not use the earphones if you perceive any visible defects.
Do not dismount or modify the earphones. These actions will invalidate the warranty.
Use only the supplied chargers and cables to charge the earphones. Unapproved chargers or cables can damage the battery or the earphones or earphones.
If the earphones have Hands-Free function, do not drive a vehicle and speak by phone simultaneously.
Do not put the earphones in your ears without earbud tips.
Do not listen too loud the music with the earphones or earphones.

Legal Note
Hereby, Atlantis Internacional, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.
Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
The ﬁnal price of this product includes the cost necessary for the correct environmental management of the generated waste.
If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualiﬁed professional.
Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
For more information, contact the retailer or the local authorities in charge of waste management.