Luminii LLRGBX18 Pixel Dynamic Color LED Strip Instruction Manual
- June 12, 2024
- luminii
Table of Contents
Luminii LLRGBX18 Pixel Dynamic Color LED Strip
Features
- LLRGBX18 Pixel SPI is a small profile and energy-efficient pixel color-changing light strip. It is easily installed directly onto the mounting surface with double-sided tape or within discrete mounting extrusions.
- LLRGBX18 is a smart pixel-controlled LED with a microcontroller every six LEDs resulting in a uniquely controlled pixel every 4”. This advanced design allows for mind-blowing animations such as cascading and chasing effects at the granular level.
- Infinite RGB lighting possibilities are now achievable with ease when using the LineLED
- RGB X18 with SPI protocol pixel control.
Mounting
- LLED strip is equipped with 3M™ adhesive transfer tape (9472LE).
Applications
- Indoor only – millwork, cove, architectural reveals, undercabinet, display case, handrail, accent lighting.
Approvals
- Class 2 damp listed
Operating voltage
- 24 VDC
Life (L70)
- 50,000 hours
Warranty
- 5 years
Technical information
TYPE | LLRGBX18 | LLRGBWX18 |
---|---|---|
OUTPUT OPTIONS | SO | SO |
Lumens Output (all channels full on) | 169 lm/ft | 256 lm/ft |
Average Power Consumption
(for a 4’ section)
| 4.5 W/ft| 5.7 W/ft
Efficacy| 38 lm/W| 45 lm/W
Cutting Increment| 3.94”
Pitch Length| 0.66”
Max Run Length
(in series)
| 30 ft| 20 ft
Dimensions| 0.39” W x 0.09” H
RGBW (3000K)
Tape
| TM-30
CRI| Rf| Rg| R9
LLRGBWX18-SO| 93| 91| 99| 64
Dominant Wavelength
Color RGB/RGBW
- Red: 621nm
- Green: 519nm
- Blue: 465nm
Section Start/End Options
SL
- Soldered lead wires (72”)
LF
- Lead Female 3” cable
LM
- Lead Male 3” cable
NC
- No connector
Ordering code
Accessories
CL1
- Mounting clip
LVSP-4T-BK
- Low Voltage, 4 Terminal Splice Box, Black
LL.ZIP
-
Strain relief clip
-
Recommended every 12” when the LineLED strip is facing down.
Lens Options / Light Transmission
Led Dotting per Extrusion
Installation
- All mounting channels are field cuttable using a miter saw with a circular blade suitable for cutting aluminum.
Ordering
- Extrusions are sold separately. View respective spec sheets for details on ordering extrusions and their accessories (endcaps, mounting brackets, etc).
Power Consumption
- Tested at full power with PDC Series power supplies.
LLRGBX18 LLRGBWX18
Nominal Length | W/ft | Total Wattage | W/ft | Total Wattage |
---|---|---|---|---|
1 | 4.6 | 4.6 | 5.7 | 5.7 |
2 | 4.6 | 9.1 | 5.7 | 11.3 |
3 | 4.5 | 13.1 | 5.7 | 16.5 |
4 | 4.5 | 17.4 | 5.6 | 21.9 |
5 | 4.4 | 21.7 | 5.5 | 27.1 |
6 | 4.4 | 25.8 | 5.5 | 32.3 |
7 | 4.3 | 29.8 | 5.4 | 37.1 |
8 | 4.3 | 33.4 | 5.3 | 41.6 |
9 | 4.2 | 37.2 | 5.3 | 46.4 |
10 | 4.2 | 40.9 | 5.2 | 51.2 |
11 | 4.1 | 45.7 | 5.1 | 57.4 |
12 | 4.0 | 49.2 | 5.1 | 61.9 |
13 | 4.0 | 52.3 | 5.0 | 66.0 |
14 | 3.9 | 55.6 | 4.9 | 69.6 |
15 | 3.9 | 58.8 | 4.8 | 73.0 |
16 | 3.8 | 61.8 | 4.7 | 76.2 |
17 | 3.7 | 64.0 | 4.6 | 78.4 |
18 | 3.7 | 66.8 | 4.5 | 81.2 |
19 | 3.7 | 69.4 | 4.4 | 83.6 |
20 | 3.6 | 72.0 | 4.3 | 86.0 |
21 | 3.6 | 74.6 | ||
22 | 3.5 | 75.9 | ||
23 | 3.4 | 78.2 | ||
24 | 3.4 | 80.2 | ||
25 | 3.3 | 82.3 | ||
26 | 3.3 | 84.3 | ||
27 | 3.2 | 85.0 | ||
28 | 3.1 | 86.7 | ||
29 | 3.1 | 88.2 | ||
30 | 3.0 | 89.7 |
Voltage Drop Calculator
- The below chart assumes a nominal voltage of 24 Volts and a Voltage Drop Allowance of 3% through the wire.
Wattage [W]
| Maximum Wire Length From Power Supply to Start of Run [ft]
---|---
12 AWG| 14 AWG| 16 AWG| 18 AWG| 20 AWG| 22 AWG| 24 AWG
5| 1088.2| 684.4| 430.3| 270.6| 170.2| 107.1| 67.3
10| 544.1| 342.2| 215.1| 135.3| 85.1| 53.5| 33.7
15| 362.7| 228.1| 143.4| 90.2| 56.7| 35.7| 22.4
20| 272.0| 171.1| 107.6| 67.7| 42.6| 26.8| 16.8
25| 217.6| 136.9| 86.1| 54.1| 34.0| 21.4| 13.5
30| 181.4| 114.1| 71.7| 45.1| 28.4| 17.8| 11.2
35| 155.5| 97.8| 61.5| 38.7| 24.3| 15.3| 9.6
40| 136.0| 85.5| 53.8| 33.8| 21.3| 13.4| 8.4
45| 120.9| 76.0| 47.8| 30.1| 18.9| 11.9| 7.5
50| 108.8| 68.4| 43.0| 27.1| 17.0| 10.7| 6.7
55| 98.9| 62.2| 39.1| 24.6| 15.5| 9.7| 6.1
60| 90.7| 57.0| 35.9| 22.6| 14.2| 8.9| 5.6
65| 83.7| 52.6| 33.1| 20.8| 13.1| 8.2| 5.2
70| 77.7| 48.9| 30.7| 19.3| 12.2| 7.6| 4.8
75| 72.5| 45.6| 28.7| 18.0| 11.3| 7.1| 4.5
80| 68.0| 42.8| 26.9| 16.9| 10.6| 6.7| 4.2
85| 64.0| 40.3| 25.3| 15.9| 10.0| 6.3| 4.0
90| 60.5| 38.0| 23.9| 15.0| 9.5| 5.9| 3.7
96| 56.7| 35.6| 22.4| 14.1| 8.9| 5.6| 3.5
Power Supply
- See fixture and power supply instructions & spec sheet for wiring information. Dimming is possible in select models – view the Luminii website for a list of compatible dimmers.
Non-Dimming Power Supply
MODELS 96W
- Length: 8.25″
- Width: 3.75″
- Depth: 1.63″
Decoders
- Programmable advanced DMX512 lighting controller featuring a touch-screen interface. Operates as a stand-alone controller or integrated with most architectural lighting control systems. Can control endless DMX512-enabled devices.
- Mounts to standard single or dual gang wall box with the included power supply inside the junction box.
- Terminal block design for power and data connections.
MODEL
- TSDMX-E
- TSDMX-E – Touchscreen DMX controller
Features
- Sleek glass design which sits 0.43” from the wall
- Graphical color display to show the selected environment
- Color/dimmer/speed palette
- Color temperature mixing
- Touch-sensitive buttons. No mechanical parts
- The touch-sensitive wheel allows for accurate color selection
- Multi-zone microSD memory
- Multi-room control with 500 scenes, 10 zones
- 1024 DMX channels. Control 340 RGB fixtures
- USB & Ethernet connectivity for programming and control
Power Supply
- 7 VDC (included)
Programmability
- PC, Mac, Tablet, Smartphone
Output Signal
- DMX512 (1024 channels)
Color Parameters
- Brightness
- Saturation
- Speed of color-changing sequence
- Fading / dimming/brightness
The SR-DMX-SPI is a smart LED pixel decoder that controls RGB/RGBW pixel LED strips with SPI signal. Designed with an OLED backlit panel, the pixel controller allows for easy configuration of most settings. Four push buttons are available for control of the LED functions.
MODEL
- SR-DMX-SPI
- SR-DMX-SPI – Smart Pixel Decoder
Features
- 1024 DMX channels. Control 340 RGB fixtures
- SPI signal output for RGB/RGBW pixel light control
- DMX512 controllable and RF/WIFI remote controllable
- Capable of addressing up to 1020 RGB pixels & 765 RGB pixels
- OLED panel allows for easy configuration
Operating Voltage
- 12-36 VDC
Power Capacity
- up to 96W at 24V
Operating Temperature Range
- from -4˚F to +122˚F in case
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>