AXAGON ADS-1PQN USB Serial Advanced Active Adapter Instruction Manual
- June 12, 2024
- AXAGON
Table of Contents
AXAGON ADS-1PQN USB Serial Advanced Active Adapter
- Connect the adapter to the USB port of the computer, it will be detected automatically (Fig. 1).
- The necessary driver will be automatically downloaded from Windows Update.
- You can also manually update it in “Device Manager” and have it searched automatically (Fig. 2).
- You can also install driver software manually.
- Download the latest driver from the hexagon.EU website. When the download is complete, extract the downloaded file and run CDM212364_Setup.exe.
- Check the successful installation in “Device Manager” (Fig. 3).
SERIAL PORT SETUP
- In “Device Manager”, right-click
- “USB Serial Port” and select “Properties” from the menu (Fig. 4).
Active converter from USB to the serial port.
TECHNICAL SPECIFICATIONS
INPUT
USB-A male connector
OUTPUT
- DB9 male connector
- Serial RS-232 standard
- 75bit/s- 12 000 000bit/s
- Compatible: 16€950 UART
- Backwards compatible: 16C550, 16C650, 16C750, 16C850
CHIPSET
FTDI FT232RL & TI TRS213l
TRANSFER SPEED
up to 256 kbit/s
OTHER FEATURES
- FIFO Buffer 256B / 128B
- Remote Wake-UP
- Advanced setting options
SIZE NET WEIGHT
- 34 x 59 x 16 mm
- 1.5 m cable length
- 83 g
SIZE NET WEIGHT
- 34 x 59 x 16 mm
- 1.5 m cable length 83 g
POWER SUPPLY
Powered via USB bus
TECHNICAL SUPPORT
More information, FAQs, manuals, and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing
helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household waste;
take it to a collection point for electrical equipment recycling. For
information about collection and recycling programs in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity
The device complies with the harmonization legislation of the European Union
2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of
conformity is available from the manufacturer. Before using the product, the
user is obliged to read the user’s instructions. The manufacturer disclaims
any liability for damage that may occur due to improper use of the product or
failure to follow the instructions contained herein. Product use other than
specified must be consulted with the manufacturer. Do not use the product in
humid or explosive environments and near flammable substances.
© 2023 AXAGON
Vÿrobce / Manufacturer: RealQ s.r.o. – Zelezná 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act. All marks indicated here are the
registered trademarks of their appropriate owners. Specifications are subject
to change without prior notice. Made in China for AXAGON.