AXAGON ADSA-FP2A Superspeed USB-A Adapter Instruction Manual
- June 12, 2024
- AXAGON
Table of Contents
AXAGON ADSA-FP2A Superspeed USB-A Adapter
INSTRUCTIONS FOR USE
- Tum on computer.
- Connect the USB adapter to the disk SATA connector.
- Connect the adapter to the USB port of the computer.
- The hard disk will be detected and installed automatically.
INFO
If you want to disconnect the hard disk, make sure that data copying is finished and the data transfer indicator is not blinking.
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0
5000 • 480 Mbit/s (SuperSpeed • HighSpeed)
USB Mass Storage Class
USB Type A male connector
OUTPUT INTERFACE
SERIAL ATA specification revision 3.1
6 • 3 • 1.5 Gbit/s (SATA/600 • SATA/300 • SATA/150)
2.5″ SATA Ill/ II/ I HDD or SSD disks supported with all capacities
22-pin SATA data and power female
5 Gbit/s theoretical speed (given by USB input)
POWER SUPPLY
Power through USB bus
OTHER FEATURES
UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport)
AUTOMATIC INSTALLATION
Plug & Play• Hot Plug• S.M.A.R.T. • TRIM
Auto Spindown • H DD Turn Off
LED INDICATION
DECENT LED indicates connection to device & disk activity
SIZE NET WEIGHT
70 x 27 x 10 mm & 21 g
Cable Length 20 cm
OS SUPPORTED
Windows & Windows Server, macOS, Linux, Chrome OS
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011 /65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
CUSTOMER SUPPORT
PRODUCT SUPPORT TLINK
http://axagon.eu/produkty/adsa-fp2a#supportlinkGoaI
SuperSpeed USS adapter for 2.5″ disks
All marks indicated here are the registered trademarks of their appropriate
owners. Specifications are subject to change without prior notice. Made in
China for AXAGON.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>