JONATHAN Y JYL9550A Elisana 26 Inch 4-Light LED Semi Flush Mount Instruction Manual

JYL9550A Elisana 26 Inch 4-Light LED Semi Flush Mount
Instruction Manual Model#: JYL9550A
Product Dimensions: 26″D X13″H

JYL9550A Elisana 26 Inch 4-Light LED Semi Flush Mount

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean clorth (use clean water, never a solvent) to wipe the
interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

• Please make sure that you have all parts indicated before you begin assembly of this item
• This item should be assembled on a soft surface to prevent scratching the finish during assembly
• To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
  *The external flexible cable or cord of this lamp cannot be replaced
  If the cord is damaged, the lamp shall be destroyed

Part List and Hardware List

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.

1. Attach the crystal branch (H) to the slot (H1), tighten with hex spanner (G).
2. Attach the mounting bracket (A) to the junction box with outlex box screw (C).
   Connect, Hot, Black or Red Outlet Supply Wire to:| Connect, Neutral, White Outlet Supply Wire to:
   ---|---
   Black| White

• Parallel Cord (round & smooth)| * Parallel Cord (square & ridged)
   Clear, Brown, Gold or Black without Tracer    (colored stripes)|  Clear, Brown, Gold or Black with Tracer (colored stripes)
  Insulated Wire (not green) with copper metal conductor| Insulated Wire (not green) with Silver metal conductor.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )  Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(B) on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw.

3. Connect the wire with wire connector (K).
4. Raise the canopy (L) thread to the threaded rod (M), secure with knurled nut (E).
5. Attach the crystal string (I) to the hole (J).
6. Install the light bulb (F) to the socket.

PLEASE USE TYPE”B” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9WATT, THERE ARE 4PCS LED 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP

Documents / Resources

| JONATHAN Y JYL9550A Elisana 26 Inch 4-Light LED Semi Flush Mount [pdf] Instruction Manual
JYL9550A, JYL9550A Elisana 26 Inch 4-Light LED Semi Flush Mount, Elisana 26 Inch 4-Light LED Semi Flush Mount, 26 Inch 4-Light LED Semi Flush Mount, 4-Light LED Semi Flush Mount, LED Semi Flush Mount, Semi Flush Mount, Flush Mount, Mount
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>