SEGWAY E2 Plus Kick Scooter User Manual

SEGWAY E2 Plus Kick Scooter

Product Information

The Ninebot KickScooter is a personal electric scooter designed for urban transportation. It is available in two models: Ninebot KickScooter E2 and Ninebot KickScooter E2 Plus. The scooter is lightweight, with a net weight of approximately 30.8 lbs (14 kg) for the E2 model and 31.7 lbs (14.4 kg) for the E2 Plus model. It has a maximum payload capacity of 198.4 lbs (90 kg) for both models.

The scooter is suitable for riders aged 14 and above, with a recommended height requirement. It has a maximum speed of approximately 12.4 mph (20 km/h) for the E2 model and 15.5 mph (25 km/h) for the E2 Plus model. The scooter can handle slopes of up to 10% and is designed for various terrains.

The battery has a nominal voltage of 21.6 V and a maximum charging voltage of 25.2 V. It has a nominal capacity of 10.2 Ah and is equipped with a Battery Management System for protection against overvoltage, undervoltage, short circuit, overcurrent, and over temperature.

The motor has a nominal power of 0.25 kW (250 W) for the E2 model and 0.3 kW (300 W) for the E2 Plus model. The maximum power output is 0.5 kW (500 W) for the E2 model and 0.56 kW (560 W) for the E2 Plus model.

The scooter comes with an 8.1-inch rubber hollow tire for a smooth ride.

Product Usage Instructions

Power Button:
To power on the scooter, press the power button. To power off the scooter, press and hold the power button for 3 seconds. When the scooter is on, you can use the power button to turn on/off the headlight and rear light by pressing it once. Pressing the power button twice will switch between speed modes.

Speedometer:

The speedometer displays the current speed of the scooter and
also shows error codes if any. It helps you keep track of your
speed while riding.

Speed Modes:

The scooter offers two speed modes:

• Mode D (Standard mode): E2 – 9.3 mph (15 km/h), E2 Plus – 12.4 mph (20 km/h)
• Mode S (Sport mode): E2 – 12.4 mph (20 km/h), E2 Plus – 15.5 mph (25 km/h)

You can switch between these modes by pressing the power button twice.

Charging:
The scooter comes with a charger that has an input voltage of 100-240 V~ and 50-60 Hz frequency. The maximum output voltage is 25.2 V, and the rated output is 24.2 V with 1.5 A current. Connect the charger to the charging port of the scooter and plug it into a power outlet to charge the battery. Ensure that the charging temperature is within the specified range.

Tire:
The Ninebot KickScooter is equipped with an 8.1-inch rubber hollow tire for a comfortable and stable ride.

Note: The range of the scooter may vary depending on factors such as speed, load, number of starts and stops, ambient temperature, etc.

Certifications:
The Ninebot KickScooter is certified to ANSI/CAN/UL-2272 by TUV Rheinland, ensuring safety and compliance. The battery also complies with UN/DOT 38.3 and ANSI/CAN/UL-2271 standards. It is also compliant with Industry Canada (IC) license-exempt RSS standards.

The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials. You must install the app, activate your KickScooter, and obtain the latest updates and safety instructions.

The pictures shown are for illustration purposes only. The actual product may vary.

Diagram

Dashboard & Power Button

• Power Button: Press the button to power on the scooter; press and hold the button for 3 seconds to power it off. When the scooter is on, press the power button to turn on/off the headlight and the rear light, and press twice to switch between the speed modes.
• Speedometer: It displays the current speed of the scooter, as well as error codes.
• Speed Mode: There are two modes available.

The top speed is as follows:

• Walk Mode : Max. speed is 5 km/h (3.1 mph). The headlight and tail light are always on and can’t be turned off.
• How to enable in the Segway-Ninebot app: Settings > Walk Mode.
• Error Notification: It indicates that the scooter has detected an error.
• Temperature Warning: It indicates that the battery temperature has reached 55°C (131°F) or is below 0°C (32°F).
• At this point, the scooter cannot accelerate normally and may not be charged. Do not use until the temperature has reverted to the normal range.
• Bluetooth: It indicates that the scooter has been successfully connected to the mobile device.
• Battery power : The total battery power equals 5 bars.
• The battery power is very low when the first battery bar is red. Please charge your scooter immediately.
• Locking Reminder: When the icon lights up, it means the scooter is locked. If abnormal movements are detected, the scooter will start beeping and the tail light will falsh.
• Cruise Mode: When the icon lights up, it means cruise mode is turned on.

Specifications

| Item| Parameter
---|---|---
Product| Name| Ninebot KickScooter E2| Ninebot KickScooter E2 Plus
Model| 051401U| 051402U
Length × Width × Height| Approx. 45.2 × 17.5 × 42.3 in (1147 × 445 × 1075 mm)
Folded: Length × Width × Height| Approx. 45.2 × 17.5 × 19.7 in (1147 × 445 × 500 mm)
Net Weight| Approx. 30.8 lbs (14 kg)| Approx. 31.7 lbs (14.4 kg)
Rider| Max. Payload| 198.4 lbs (90 kg)
Recommended Age| 14+
Required Height| 3’11”–6’6” (120–200 cm)
Machine| Max. Speed| Approx. 12.4 mph (20 km/h)| Approx. 15.5 mph (25 km/h)
Theoretical Range[1]| Approx. XX miles (XX km)
Typical Range[2]| Approx. XX miles (XX km)
Max. Slope| Approx. 10%
Traversable Terrain| Mostly smooth roads or normal asphalt, tarmac roads
Operating Temperature| 14–104°F (-10–40°C)
Storage Temperature| 14–122°F (-10–50°C)
IP Rating| IPX4
Duration of Charging| Approx. 8 h
Battery| Model| NEEF2210A
Nominal Voltage| 21.6 V
Max. Charging Voltage| 25.2 V
Charging Temperature| 32–111°F (0℃–44℃)
Nominal Energy| 220 Wh
Nominal Capacity| 10.2 Ah
Battery Management System| Protection against overvoltage/undervoltage/short circuit/overcur- rent/over temperature
Motor| Nominal Power| 0.25 kW, 250 W| 0.3 kW, 300 W
Max. power| 0.50 kW, 500 W| 0.56 kW, 560 W

Charger

| Model| NBW25D201D5N-US
Output Power| 36.3 W                         100-240
Input Voltage| V~ 50-60 Hz
Max. Output Voltage| 25.2 V
Rated Output| 24.2 V 1.5 A
Tire| Tires| 8.1-inch rubber hollow tire

1. Theoretical Range: tested while riding with a full battery, 165 lbs (75 kg) load, 77°F (25°C), 70% of max. speed on average on pavement.
2. Typical Range: tested while riding with a full battery, 165 lbs (75 kg) load, 77°F (25°C), at the max. speed on average on pavement.

• Some of the factors that affect range include speed, load, number of starts and stops, ambient temperature, etc.

Certifications

This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/CAN/UL-2271.

Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5 mm between the radiator & your body.

Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B)/NMB-3(B).

Bluetooth

• Frequency Band(s) : 2.4000-2.4835GHz
• Max. RF Power: ≤1mW

Model: E2
FCC ID:2ALS8-KS0014 IC: 22636-KS0014

Model: E2 Plus
FCC ID:2ALS8-KS0015 IC: 22636-KS0015

References

• Home | Segway

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>