AXAGON CRE-SMP1A USB Smart Card or ID Card Pocket Reader Instruction Manual
- June 12, 2024
- AXAGON
Table of Contents
AXAGON CRE-SMP1A USB Smart Card or ID Card Pocket Reader
USB Smart Card or ID Card Pocket Reader
- Turn on the computer.
- Connect the reader to the computer USB port.
- An automatic installation will take place. No external drivers are required.
- The Smart Card Reader is ready.
- Insert the Smart Card into the reader.
- Check the successful installation in the Device Manager (Fig.1).
INFO: To use the reader, it is necessary to install suitable software according to the way the inserted Smart Card is used.
figure 1
- Using Device Manager to check correct installation in Windows 10
- only devices added to the Device Manager during card installation are displayed
Supported smart cards
- CARD WITH A VISIBLE CHIP – SUPPORTED
- CARD WITHOUT A VISIBLE CHIP- NOT SUPPORTED
How to insert cards & LED Indication
Technical Specification
INPUT
- U5B 2.0• U5B 1.1
- USB 2.0 CCID protocol
- Built-in USB 2.0 type A male connector
SMARTCARD SLOT
- supports Contact Smart Cards for ATM / CAC /ID / IC / 515
- Contact Smart Cards 150 7816, class A, B and C (5V, 3V and 1.8V)
- Standards 150 7816, EMV 4.1
- Protocols T=O and T=1, 12(
- SLE 4432/42 (5=10), SLE 4418/28 (5=9)
- PC Smart Card standard P C/SC 2.0
- FIP5 201
- Microsoft Smart Card for Windows
- Microsoft WHQL USB Smart Card Re a der
- l2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT885C1608, AT45D041
- Smart Card interface speed 420 Kbps (depend on card)
OTHER FEATURES
- Plug and Play• Hot Plug • Hot Swap• USB bus power• AUTO install • Sleep mode support OS SUPPORTED
- Windows: XP / Vista /7 / 8.1 / 10 / 11 & later
- Server: 2003 / 2008 / 2012 I 2016 / 2019 I 2022 & later 32 & 64bit versions supported
- Mac 05 X 10.x & later
- Linux 2.4.x & later
- Android 8 & later
TECHNICAL SUPPORT
- More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.
- At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
- EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
- Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
- Do not use the product in humid or explosive environments and near flammable substances.
Read User Manual Online (PDF format)
Loading......