AXAGON ADR-210B USB Repeater Cable 10m Instruction Manual
- June 12, 2024
- AXAGON
Table of Contents
AXAGON ADR-210B USB Repeater Cable 10m
INTRODUCTION
- Turn on the computer.
- Connect the cable to your computer’s USB port.
- An automatic installation will be performed.
- No need to install any external drivers.
- The USB connecting cable is ready.
CHARGING
- Power via the computer’s USB port is sufficient for most connected USB devices.
- For connecting of an external hard drive, it is usually necessary to use an additional power supply.
- When connecting multiple active USB cables behind each other, the supply voltage is reduced and it is better to use the additional power supply of the last active cable in a row.
- The supplied power cord allows additional power from a regular mobile phone charger with min. 5V/1A USB-A output.
INDICATOR
SPECIFICATIONS
- INPUT INTERFACE: USB 2.0 • USB 1.1 USB-A (M) male connector
- OUTPUT INTERFACE: USB 2.0 • USB 1.1 480 • 12 • 1.5 Mbit/s (High • Full • Low Speed) USB-B (M) male connector
- POWER SUPPLY: USB bus power & self power 3.5 mm connector for additional power
- OTHER FEATURES: Plug and Play • Hot Plug Automatic Installation
- OS SUPPORTED: Windows • macOS • Linux Chrome OS • Android
TECHNICAL SUPPORT
- More information, FAQs, manuals, and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu.
- Nothing helped? Write to our technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste
- Take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
- EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
- Before using the product, the user is obliged to read the user’s instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
- Do not use the product in humid or explosive environments and near flammable substances.
© 2023 AXAGON
Virobce / Manufacturer:
- Real s.r.o. – Zelezná 5, 619 00 Brno, Czech Republic
- All rights reserved. All text and pictorial materials contained in this document
- are protected by Copyright Act.
- All marks indicated here are the registered trademarks of their appropriate owners.
- Specifications are subject to change without prior notice.
- Made in CHINA for Axagon. www.axagon.eu.
Read User Manual Online (PDF format)
Loading......