superbrightleds LF-BL-A3 Bluetooth Dimmer User Manual
- June 12, 2024
- superbrightleds
Table of Contents
User Manual
Bluetooth Dimmer
Safety and Notes
- Product should be installed and serviced in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
- Failure to properly secure dimmer, may result in damage, for which the manufacturer does not assume responsibility.
- Intended for indoor use only.
- Auto-transmitting function relays signal to additional compatible dimmers in 80 ft (25 m) range.
Specifications
| Model | LF-BL-A3 |
|---|---|
| Input Voltage Range | 9–24 VDC |
| Output Voltage Range* | 9–24 VDC |
| Max Input Current | 6 Amps |
| Max Output Current | 6 Amps |
| Operating Temperature | -22°–131° F (-30°–55° C) |
| Max Recommended Communication Distance (varies by device) | 80 ft (25 m) |
| Weight | 1.6 oz (45 g) |
*Output voltage will not exceed input voltage.
Wiring Diagram
The reset button can be used to unpair dimmer. If dimmer has issues pairing, this can also be used to reset to default settings.
Downloading the App
The app can be downloaded by scanning the above QR code or by searching for “Open-Lit” in the Apple App Store or Google Play Store.http://www.opuritech.com/APP.html
Phone/Tablet App Registration
-
Ensure Bluetooth is enabled on the device.
-
Open the app and select “Register” on the top right.
-
Select an password and email combo for account, then press “Register” button.
-
Return to home screen and log in.
Note: Dimmer can only be paired to one account at a time. However, the same account can be used on multiple devices to access the same dimmer.
Pairing Dimmer to Phone/Tablet
- Once logged in, and with device on the appropriate setting (RGB, CCT, or single color dimming), press “Add device” button.
- Select “Add Bluetooth device” option.
- A configuration screen will be displayed which will automatically pair the dimmer and the phone/tablet.
- Once the process is finished, app will return to the home screen, where the dimmer will now appear.
Note: Each time the mode on the dimmer is changed, the dimmer will need to be re-paired with account on phone/tablet.
Renaming or Removing Dimmer
Once a dimmer is successfully paired, the name of the paired dimmer can be
changed by swiping to the left on the dimmer name and selecting “rename”
button. Select the delete option to unpair the dimmer from the account.
Light Function
There are 6 brightness presets. A brightness control slider and a master
on/off button are also located on this screen. Note: RGB and
white can not be used at the same time.
Mode Selection
This screen features 3 preset patterns. Timing
Up to 16 on or off timer settings can be saved to automate dimmer function.
The dimmer will remain on the same setting it was using previously when
powered back on.