KSIX BXOUTL1 SmartLED Outdoor Spotlights User Manual

: June 12, 2024
: KSIX

Table of Contents

SMART LED
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SMART LED

SET 4 OUTDOOR SMARTLED SPOTLIGHTS

User Manual

BXOUTL1

Technical information

Power: 18W
Input voltage: 220-240V/50-60 Hz
Power supply: 12V/3A mains adapter
Luminous flux: 900 lm
LED color: RGBIC+W (Warm white: 3000K)
Illumination angle: 120º
Water resistance: IP65 (Floodlight Strip and controller), IP44 (Mains adapter)
Temperature: -20ºC to +60ºC
Lifetime: 20.000h
Connectivity: WiFi and Bluetooth
Voice assistant: Amazon Alexa and Google Home
App: TuyaSmart and Smart Life
Dimensions: 6 cm (diameter) x 33 cm
Total length: 9,5 m
Material: ABS + PC
Weight: 1131 g

Box contents

1 x Strip with 4 spotlights
1 x Mains adapter
1 x Integrated controller
4 x Ground stakes (205*Ø20mm)
4 x Screws (stainless steel)
4 x Flat washers M4 (stainless steel)
4 x Spring washers M4 (stainless steel)
1 x User manual

1. INSTALLATION

Installation in the garden or on the ground:

Installation on a flat, rigid surface:

Note: Before proceeding with the installation, make sure that the protective cover of the main adapter is fixed and screwed on correctly.

How to connect two strips

This device allows the connection of a second strip of 4 spotlights to reach a total length of 19m. This second strip is not included in this pack.

Disconnect the output cable from the controller.
Remove the end cap of the other set.
Connect both sets by joining the cables described above.

Note: Up to two devices can be connected to the adapter included in the box.

Integrated control functions – No connection required

2. Download the app

To download the Tuya Smart or Smart Life app, tap on the App Store or Google Play icon.
You can also search the app in the App Store or Google Play.

TuyaSmart

Smart life – Smart living

3. Register

If you do not have an account on the App, register and log in with the verification code.
Enter your email address and click on “Get verification code”. Enter the verification code that you will receive in your email.
Set the password and tap on “Done” to complete the registration.

4. Add your device

1. First, turn on the Bluetooth and WiFi on your phone.
2. Open the app and tap on “Add device” or “+” in the top right corner.

3. Connect the device to the network and switch it on by pressing the button on the controller twice.
4. To initiate the App pairing, press the button on the controller for 6 seconds until it flashes red.
5. Select your Smart device from the device list or use the automatic scan to find it straight away.

6. Finally, select the 2.4 GHz WiFi network, add the network password and wait while the app adds the device. Once it is added, tap on “Finished”.

Note:

For a correct synchronization with the mobile phone, it is necessary to accept all the accesses requested by the app.
When linking your phone with the device for the first time, you must be connected to a WiFi network. Make sure that the light flashes quickly and that the WiFi password you have entered is correct. (The connection process may take several minutes, please be patient).
After the first connection, you can use a new WiFi or mobile data to control the device at any time and from any location.
Only compatible with 2.4 GHZ WLAN, Android 4.1 and above and iOS 8.1 and above. Do not use 5G WiFi.
The first connection should be made close to the router to ensure a faster connection.
When connecting multiple devices to the WiFi network, do not place them too close together as this may cause signal interference.

5. Control your device

After a successful pairing, the device will be displayed on the “Devices” page. Click on the device icon in order to access and control its functions.
The first time you access the device configuration you will have to select the number of spotlights incorporated in the strip. Make sure you select “4” and click “Confirm”.
Navigate through the app menus to control your device.

Color selection

To access the color control feature tap on the icon showing a bulb at the bottom of your screen. The control of the color of the spotlights has three different features:

1. The first color feature lets you choose the color that you want the four spotlights to show.
To access the feature tap on the first icon on the right side of your screen.

You can also select the color white and its intensity.

2. The second color feature lets you choose different colors for each spotlight. To access the feature tap on the second icon on the right side of your screen.

3. The third color feature lets you switch off each spotlight individually. To access the feature tap on the third icon on the right side of your screen.

Scenario modes

To show the scenario modes, tap on the icon showing a palette at the bottom of your screen.
In order to select one of the several scenario modes just tap on them.
You can edit any scenario mode and choose the combination of colors that you like the most. In order to do this tap on the icon showing three dots visible at the top right corner of each scenario mode.

Synchronization with music

To access the music synchronization feature tap on the icon showing a musical note at the bottom of your screen.
Once inside, choose one of the three features (Rhythm, Game and Romantic) by tapping on the play icon. The lights will follow the music collected by the phone microphone and will show different lights, colors and effects.

Plan countdowns and timers

To access the planner, tap on the icon showing a sheet and a clock at the bottom of your screen.
This feature lets you set timers and countdowns in order to automatically switch on the spotlights at a previously selected time.
To set a countdown tap on “Countdown” and select the hour and the minute for your countdown and tap on “Confirm”.

6. Voice Assistants

To set up your voice assistants through the app, you will need to tap on the top right corner and then tap on the “Edit” icon.
From here you can permit access to third parties to control the spotlights, such as Alexa and Google Home.
You can adjust the brightness, change the color, or simply turn the spotlights on and off with just a few words.

7. Device settings

The App also allows you to configure other features of the spotlights, such as its name.
To manage these other features, you will need to access the upper right corner and tap on the “Edit” icon.

8. More about the App

You can adjust the different functions from the menu button at the top right corner of the App.

The device name can be changed as desired.
Device information.
Tap-to-Run and Automation allows you to check the Intelligent Automation to which your device is linked.
Supported third-party control provides information on how to connect your device with Amazon Alexa, Google Assistant.
Disconnection notice: allows you to alert yourself when your device is offline.
Create “Group” to control another smart device at the same time.
FAQ & Feedback allows users to report issues and obtain assistance.
Add to Home Screen allows you to add the smart device to your smartphone’s home screen.
Check the network of the device to check the status of the network connection.
Firmware information allows you to check the software or install updates on the device.
Restore factory settings: Allows you to reset the factory settings of the smart device.

Maintenance recommendations

Regularly clean the product with a dry cloth.
The product must be disconnected or switched off when cleaned.
Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
Avoid breaking the device. Do not put objects over it or bend it too strong.
If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
Prevent the connector from getting wet. The spotlights are IP65 water-protected, but the plugs are not.
When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
If water enters the product interior, unplug it immediately from any attached power source or device it is connected to.
Avoid dropping or hitting the product. That might damage it.
Do not use the product for anything other than its intended use.
Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
Do not use the product if it is wet or damaged.
Do not use the product with wet hands.
Do not leave the product in contact with flammable materials.
Do not expose the product to high temperatures (for example: inside a car during hot weather).
Do not throw the product into fire.
Keep the product away from children.
Disconnect or switch o_ the product if you are not going to use it for a long period of time.
Do not use the product if you perceive any visible defects.
Do not attempt to open or puncture the product. You might damage it.
Do not use the product with incompatible devices.
Do not disassemble or modify the product. These actions will invalidate the Warranty.

Legal Note

Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
For more information, contact the retailer or the local authorities in charge of waste management.