Kogan KAWPWTRFNTA Smarterhome 1.9L Pet Water Fountain User Guide

Kogan KAWPWTRFNTA Smarterhome 1.9L Pet Water Fountain User Guide

SAFETY & WARNINGS

To protect against electric shock, avoid immersing the power cord in water or any other liquid.

• Close supervision is necessary when children are using or are near the appliance.
• Unplug the appliance from the outlet when it is not in use and before cleaning.
• Do not operate the appliance if the cord is damaged. If the appliance malfunctions or has been damaged in any way, cease use immediately and contact help.Kogan.com for support.
• Do not use any accessory or attachments that have not being supplied with this product.
• Do not use this appliance outdoors.
• Avoid letting the power cord hang over the edge of a table or counter or come into contact with hot surfaces.
• Do not place the appliance on or near a hot gas or electric burner or in a heated oven.
• Always attach the plug to the appliance first, and then connect it to an electrical outlet.
• Use the appliance only for its intended purpose.
• This appliance is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have received supervision or instructions on how to use the appliance safely from a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Avoid looking directly into the UVC light during operation.
• Over time, yellowing inside the product is normal.
• Please ensure that the unit is placed on a flat surface to prevent accidental overturning, which can cause the fountain or function incorrectly.
• Ensure the power cord is properly shielded and organised in a way that prevents pets from biting the cable and causing dangerous situations, such as electric shock.
• This product is suitable for cats or small to medium sized dogs.

COMPONENTS

• Fountain
  

• Water Filter
  

• Foam Filter

• User Guide

OVERVIEW

ASSEMBLY

1. Clean the inside of the tank, the lid and the filter tray using a soft cloth.

2. Soak the water filter in clean water for 5 minutes.

3. Fill the tank with clean water. Note: Do not exceed the maximum water level.

4. Place the pre-soaked filter into the filter tray.

5. Place the filter tray on the tank and then place the lid onto the filter tray
   

6. Connect the power cord to a USB (5V 1A) power adaptor then plug it into an electrical outlet.
   Note: USB power adapter is not supplied
   

CONNECT TO SMARTERHOME™ APP

Install App
Download the “ Kogan SmarterHome ” app from the Play Store (Android) or App Store (iOS)

To register:

1. If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
2. The system will automatically recognise your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap ‘Get Verification Code’ to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires.
4. Continue to the next page and complete your SmarterHome profile
   

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator is flashing rapidly).

If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the button until the Wi-Fi indicator begins flashing rapidly.

Add device through network

1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.

2. Select the product type from the list of options in the app (Other > Kogan Smart Pet Fountain).

3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
   
   Notes
   

   • The device and the app have to use the same Wi-Fi network.
   • The device is only compatible with 2.4Ghz networks.
   • Depending on the product, Steps 3 and 4 may be in opposite order.

4. Ensure that the device is in pairing mode (indicator is flashing rapidly) and tap “Next”.

5. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.

6. After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.
   

Note:
Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected SmarterHome™ products and automate their functions.

CLEANING & CARE

• Clean the fountain at least once a week to prevent the build-up of dirt, debris, and bacteria.
• Before cleaning, always unplug the fountain from the power source. Disassemble the fountain components, including the pump, filters, and water tank.
• Rinse all removable parts with warm water to remove any loose debris. Use a mild detergent and a soft brush to scrub away stubborn stains or residue. Avoid using abrasive cleaners or harsh chemicals that could damage the fountain.
• Clean the pump thoroughly as it plays a vital role in maintaining water circulation. Remove any hair, debris, or clogs from the pump to ensure its optimal performance.
• Regularly empty the water reservoir and refill it with fresh water. Stagnant water can promote bacterial growth and affect the water quality.
• Do not overfill the tank beyond the maximum water level indicator. Overfilling can lead o spillage and potential damage to the fountain.
• Perform a deep cleaning of the entire fountain, including all nooks and crannies, every month. This thorough cleaning helps eliminate any hidden debris or bacteria.
• Ensure that your pet’s mouth is clean and free from any debris or foreign objects before they use the fountain.

Filter replacement
It is recommended to replace both the water filter and foam filter every 30 days.
Note: Soak the water filter in clean water for 5 minutes before installing it into the filter tray

TROUBLESHOOTING

Indicator Status

SPECIFICATIONS

• Dimensions: 174 x 181 x 154mm
• Material: ABS
• Net Weight: 580g
• Capacity: 1.9L
• Connectivity: Wi-Fi (2.4GHz)
• Input Voltage:   DC 5V 1A

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>