BREEO BR-OP19 Outpost Rod Grill User Guide
- June 12, 2024
- Breeo
Table of Contents
BREEO BR-OP19 Outpost Rod Grill User Guide
PILLAR TO THE OUTPOST ECOSYSTEM
Compatible with all Breeo X and Y Series Fire Pits. The Outpost Rod can also be used over almost any fire when paired with the Anchorpoint. Use with the Outpost Grill, Heat Deflector, Kettle Hook, and other Outpost accessories.
HOW TO USE
STEP 1
Insert the peg and collar end of the Rod into the opening on the rim of your
fire pit.
STEP 2
Align pegs on the Rod with notched openings on the fire pit, lower Rod, ensure
pegs go down into the opening, and twist the Rod to secure.
STEP 3
Slide locking collar on Rod down, align tabs and slide them into the notched
openings on the fire pit. This will lock the Rod into place, and the Rod
should not spin.
You can now slide any Outpost accessory onto the Rod and adjust height and
orientation as needed.
USE & CARE
Never use any hammer or blunt force tool to drive the Outpost™ Rod into the Anchorpoint™. This may cause damage to the Rod, and prevent it from being inserted into the Anchor point again.
Clean stainless steel with bristle brush, water, and dish soap.
Stainless steel may darken in color when exposed to heat.
WARNING
Always practice safety first when using the OutpostTM system and accessories, exercise the same precautions you would with any open fire.
Never leave your Breeo Fire Pit & accessories unattended, especially around children and pets.
The Outpost Rod and accessories become very hot in use and can cause severe burns. Do not touch when hot.
When adjusting the height or orientation of your Outpost accessories, always wear protective gloves or use other heat protection to avoid burns.
Avoid touching sensitive surfaces with the Outpost Rod and accessories when they are hot.
(800) 413 -9848
CONTACT@BREEOLLC.COM
© 2023 Breeo LLC. All rights reserved. 3/23
www.breeo.co/pages/warranties
MADE BY BREEO IN LANCASTER PA, USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>