PROTEKT AF160200 Work Positioning Device Owner’s Manual

: September 3, 2024
: PROTEKT

Table of Contents

AF160200 Work Positioning Device
Product Specifications:
Product Usage Instructions:
1. Inspection and Preparation:
2. Attachment:
3. Adjusting Length:
4. Usage:
- Frequently Asked Questions (FAQ):
Q: How should I clean the work positioning device?
Q: Can the rope be replaced if damaged?
Q: What is the weight capacity of the PROT 30 work positioning

AF160200 Work Positioning Device

“`html

Product Specifications:

Core Material: Steel
Kernmantle Material: Polyester
Manufacture: Braided rope
Rope Diameter: 16 mm
Rope Ends: Strong crimped aluminum bits,
thimble with snap hook
Carabiner: AZ 060
Protective Tube Material: Coated fabric
Adjuster Material Carabiner: Light alloys AZ
011
Variants:
- AF160200 – Length: 2m
- AF160300 – Length: 3m
- AF160400 – Length: 4m
- AF160500 – Length: 5m

Product Usage Instructions:

1. Inspection and Preparation:

Inspect the work positioning device for any signs of damage or
wear before each use. Ensure all components are functioning
properly.

2. Attachment:

Securely attach the AZ 060 or AZ 011 spring hooks to appropriate
anchor points on your work surface or harness.

3. Adjusting Length:

Use the adjuster to set the desired length of the rope according
to your work requirements.

4. Usage:

Utilize the PROT 30 work positioning device as intended,
ensuring proper positioning and support during work activities.

Frequently Asked Questions (FAQ):

Q: How should I clean the work positioning device?

A: Use a damp cloth with mild soap to gently clean the device.
Avoid harsh chemicals or abrasives that may damage the
materials.

Q: Can the rope be replaced if damaged?

A: It is recommended to contact the manufacturer or an
authorized service center for rope replacement to ensure safety and
compliance.

Q: What is the weight capacity of the PROT 30 work positioning

device?

A: The weight capacity may vary based on the specific variant,
but generally, it is designed to support the weight of a single
user during work positioning tasks.

“`

PROT 30 Work positioning device

EN 358

The PROT 30 supported work device comes equipped with AZ 060 (opening: 21 mm) and AZ 011 (opening: 18mm) steel spring hooks.

PARAMETERS

Core material

steel

Kernmantle material

polyester

Manufacture

braided rope

Diameter Ø

16 mm

Rope ends strong crimped aluminium bits, thimble with snap hook

Carabiner

AZ 060

PROTECTIVE TUBE Material
ADJUSTER Material Carabiner

VARIANTS
ref. no. AF160200 AF160300 AF160400 AF160500

coated fabric
light alloys AZ 011
length [m] 2 3 4 5

PROTEKT Grzegorz Laszkiewicz Spolka z o.o. Starorudzka 9, 93-403 Lodz, POLAND KRS: 0001009727 | REGON: 524047958 | NIP: 7292747932
EXPORT SALES DEPARTMENT Skromna 6, 93-405 Lodz, POLAND Phone: +48 42 29 29 500, export@protekt.com.pl, Fax +48 42 680-20-93

WWW.PROTEKT.PL