Scanstrut SC-CW-06F ROKK Wireless Instructions
- June 5, 2024
- SCANSTRUT
Table of Contents
ROKK Wireless – Nest. (SC-CW-06F)
Installation Instructions
Use of the bracket with unapproved products, or overloading, invalidates any bracket warranty.
Technical Information
Charge/Storage pocket
Max phone size: 176mm (6.92”) x 92mm (3.62”)
(Including case)
Wireless charger SC-CW-01F
Input voltage range :
Input current max:
Output power:
Standby current draw:
Certifications:| 10-30V DC (12/24V system)
2A
10W (9V, 1.1A)
< 0.2W
Qi, CE, UKCA, FCC, ROHS, UNECE R10 E24, RCM, IC, PSE
---|---
Waterproof rating: IPX6 front and back
Parts list
Pocket
x1| 
No6 (3.5mm) x 3/4” (19mm)
self-tapping CSK
Philips screw or mast sections outside the abo
x4
---|---
Front bezel
x1|
3 x 10mm Pan head Philips Thread forming screw
x5
SC-CW-01E-005
Wireless Charger
x1| 
Drain Pipe 8mm (5/16”) internal diameter
(Optional, not included)
x1
Tools Required
| Philips No. 2
screwdriver
---|---
| Power drill
| Jigsaw
| Drill bits
5mm (3/16”)
2.5mm (3/32”)
3mm (1/8”)
| Silicone Sealant
READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING
| 1. Choose
mounting location ensuring it is adequate space behind the mounting surface.
---|---
| 2. Cut out
holes and drill pilot holes using a paper template.
| 3. Install
wireless charger SC-CW-01E using x3 3mm x 10mm pan head Philips thread forming
screws provided.
| 4. Optional Drain Pipe: Carefully drill drain holes using 5mm (3/16”) drill
bit. Attach drain pipe 8mm (5/16”) ID pipe, not included.
| 5. Apply
silicone sealant generously around the flange, ensuring good coverage around
the perimeter.
| 6. Secure with
x4 No6. (3.5mm) x 3/4” (19mm) Self-tapping CSK Philips screws provided. Add
silicone sealant to screw holes.
| 7. Attach
front bezel using x2 remaining 3 x 10mm Pan head Philips thread forming screws
provided.
| 8. Connect
wires to 12/24V supply, ensuring a waterproof connection. Fuse according to
input voltage and current.
Drill x4 holes for No.6 Screws Suggested pilot holes
| Material | No. 6 Screw |
|---|---|
| Soft Material e.g Plywood | 2.5mm (3/32″) |
| Hard Material e.g acrylic hardwoods | 3mm(1/8″) |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>