CERBERUS PYROTRONICS 10 Inch Bell1 Vibrating and Single Stroke Bells Owner’s Manual
- June 9, 2024
- CERBERUS PYROTRONICS
Table of Contents
Vibrating and Single Stroke Bells
ENGINEER AND ARCHITECT SPECIFICATIONS
- AC or DC Operation
- Vibrating or Single Stroke Units
- Sturdy Metal Construction
- High dB Output
- Standard 4″ Square Mounting
- Available in 4″, 6″, 8″ and 10″ Sizes
- Noise Cancellation Circuitry
- Available in Chime Listed
- ULC Pending
Introduction
Cerberus Pyrotronics Vibrating and Single Stroke bells provide high quality construction for maximum reliability and customer satisfaction. Cerberus Pyrotronics bells integral bell/chime design combines the bell mechanism and gong/chime into one unit. Four gong sizes and a chime are available to provide distinctive tones and to overcome different ambient noise levels.
Description
Cerberus Pyrotronics bells are used in a variety of applications. Used in schools and other buildings, the Cerberus Pyrotronics unique design provides a sound all its own. Offered in chime, 4, 6, 8, and 10 inch gong or additional strobe plate configurations, the signals can be used for new installations or existing retrofits. Parallel units are designed with terminals to insure proper supervision as well as provide better electrical connections. Parallel devices also include a blocking network for connection to a supervised signal circuit. Each unit is provided with noise cancellation circuitry to prevent the transmission of transient spikes, typically generated by DC contact type electromechanical devices.
Cerberus Pyrotronics Bells
Model
Number| Part
Number| Action| Voltage| Current| U.L. db 010
---|---|---|---|---|---
4″ Bell| 6″ Bell| 8″ Bell| 10″ Bell| Chime
BT-F| 500-694372| VIE| 24 VDC| 0.11A| | | | 87db|
BE-F| 500-694373| VIE| 24 VDC| 0.11A| | | 87db| |
BS-F| 500-694374| VIE| 24 VDC| 0.11A| | 84db| | |
BF-F| 500-694375| VIE| 24 VDC| 0.11A| 87db| | | |
CH-F| 500-694376| VIE| 24 VDC| 0.11A| | | | | 81db
BT-SS| 500-694387| S.S.| 24 VDC| 0.36A| | | | 78db|
BE-SS| 500-694388| S.S.| 24 VDC| 0.36A| | | 75db| |
BS-SS| 500-694389| S.S.| 24 VDC| 0.36A| | 75db| | |
BF-SS| 500-694390| S.S.| 24 VDC| 0.36A| 75db| | | |
CH-SS| 500-694391| S.S.| 24 VDC| 0.36A| | | | | 81db
BT-LC| 500-694382| VIE| 24 VDC L.C.| 0.07A| | | | 81db|
BE-LC| 500-694383| VIE| 24 VDC L.C.| 0.07A| | | 78db| |
BS-LC| 500-694384| VIE| 24 VDC L.C.| 0.07A| | 78db| | |
BF-LC| 500-694385| VIE| 24 VDC L.C.| 0.07A| 75db| | | |
CH-LC| 500-694386| VIE| 24 VDC L.C.| 0.07A| | | | | 81db
VIB = Vibrating
S.S. = Single Stroke
L.C. = Low Current
- For (Canada) ULC labeled models, add “-C” to the model number.
Minimum db calculated from integrated sound power measurements at Underwriter’s Laboratories per UL 464. Typical db measurements with conventional sound level meters will be significantly higher in actual installation.
Bell / Chime Strobe Plates
Model No.| Mounting| Nominal
Voltage| Box| Nominal Strobe Current Ratings (mA)
---|---|---|---|---
15| 17(15/75)| 75| 110
S( )6060H| Horizontal Strobe| 24 VDC| 4 in. sq.| 80| 80| NA| NA
S( )6090V| Vertical Strobe| 24 VDC| 4 in. sq.| 80| 80| 175| 245
Stand alone strobes utilize wire nuts for connection. Terminal strips are
available by modifying part number to read -FT (Flush with Terminals) or -ST
(Surface with terminals). FS (single gang) models are not available with
terminals.
*Surface mount units are rated weatherproof when used with FWB-1 or FWB-2 surface weatherproof box.
Note ( ) represents strobe model, e.g., 15, 17, 75 or 110.
Bell / Chime Sync Strobe Plates
Model No.| Mounting| Nominal
Voltage| Box| Nominal Strobe Current Ratings (mA)
---|---|---|---|---
15| 17 (15/75)| 75
S( )S-6060H| Horizontal Strobe| 24 VDC| 4 in. sq.| 144| 144| 328
S( )S-6090V| Vertical Strobe| 24 VDC| 4 in. sq.| 144| 144| 328
Mounting Options and Dimensions
BT-F Shipping Weight: 4.75lb
BF-F Shipping Weight: 1.75lb
BS-F Shipping Weight: 2.50lb
BE-F Shipping Weight: 3.75lb| Rated for indoor use 32°F to 120°F (0°C to
49°C), RH @ 85%
Rated for outdoor use when surface bell mounted to weatherproof box
Outdoor rating: -31°F to 150°F (-35°C to 66°C), RH @ 98%
---|---
NOTICE: The use of other than Cerberus Pyrotronics notification appliances, detectors and bases with Cerberus Pyrotronics control equipment will be considered a misapplication of Cerberus Pyrotronics equipment and as such void all warranties either expressed or implied with regard to loss, damage, liabilities and/or service problems.
Cerberus Pyrotronics
8 Ridgedale Avenue
Cedar Knolls, NJ 07927
Tel: 973-267-1300
FAX: 973-397-7008
Website: www.cerbpyro.com
9/9710M
CPY-IG
Printed in U.S.A.
Cerberus Pyrotronics
50 East Pearce Street
Richmond Hill, Ontario
L4B, 1B7 CN
Tel: 905-764-8384
FAX: 905-731-9182
September 1997
New Issue
firealarmresources.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>