LAMTTO DC15 4K UHD Dash Cam Front and Rear Instruction Manual

4K UHD
Dash Camera
Instruction Manual

If you have any question of our dash cam, please contact us
DC@yooomall.com
we can provide solution that you can accept.

Important Notice

1. This product is intended for use in motor vehicle only. do not install the camera where it might block the driver’s view of road (including the mirrors) or the deployment of the airbag.
2. Before using this camera, please format the memory card in the computer (select 32 KB unit size to format it), then insert the memory card first, and format the memory card in camera menu.
3. This camera records video at high resolution, Be sure to use U3 high speed Micro SD card, 32GB or 256GB cards are recommended.
4. Make sure the camera lens is clean and there is nothing blocking the lens.
5. DO NOT leave the camera in direct sunlight for a long period of time or where the temperature could go above 149°F (65°C)
6. The camera is equipped with internal GPS function .

Product Diagram

1. Power/Menu
2. Down Button/WIFI/On-screen display
3. Up Button/Audio Recording/Take Photo
4. OK/playback
5. 3M sticker bracket interface
6. Rear/Data interface
7. Mini USB/Power port 1
8. Micro SD Card Slot
9. Mic
10. Lens

Button Function Explanation

Power/Menu

1. In standby state, long press to turn off, in shutdown state, long press to turn on
2. In standby mode, short press to enter/exit the menu
3. In the menu, menu function options, short press to return to the previous menu
4. In playback mode, short press to open the operation interface
5. In the recording state, short press to lock the video

Up Button/Recording

1. In standby and recording state, short press to turn on/off the microphone
2. In the menu and function options, short press left/up to select functions and options
3. In the recording state, long press the screenshot
4. In the state of playing video, short press to go backward
5. In the state of browsing photos, short press to view the previous one

Down Button/WI Fl

1. In standby and recording state, short press to switch the screen (pre-record-back-pull-split screen)
2. Long press to turn on/off WIFI
3. In the menu and function options, short press right/down to select functions and options
4. In the state of playing video, short press to fast forward
5. In the browsing state, short press to view the next one

OK/Playback

1. In standby mode, short press to start recording
2. In recording state, short press to stop recording
3. In the menu, short press to enter the next level
4. In the function options, short press to confirm the option
5. In standby mode, long press to enter playback mode (folder)

When the camera is powered on, it will record video automatically, if you want to end or stop recording, please press OK button.

Set up and Installation

1. Use the 3M holder sticker mount to install the dash cam on the windshield, recommended position is near the rear view mirror near the passenger seat, adjust both lens angle for best coverage.
2. Plug the included power adopter into the car cigarette lighter socket, the indicator will light up, which meons the power is on
3. Connect the power adopter and the dash cam, and route the excess cable alongside the interior trim for better looking.
4. Install the rear camera on the back of the car’s rear on the windshield, adjust the lens angle for the best coverage, and then connect the rear camera connector to the main engine.
5. Start your car, the camera will automatically power on, check the lens angle and coverage, make sure all functions works well before going on the rood.

Function Description

Power on/off:

1. Power on: The device will automatically enter video recording mode when press the Power Button or connect it to the cigarette lighter using the car charger.
2. Power off: long press power off.
   After the car breaks down, the device will automatically power off when the car charger stops supplying power

Video Recording mode:

15. WIFI password

1. When the camera is in video recording, the blue indicator light in the upper right corer of the camera will keep blinking, and there is a red indication icon in the upper right corner of the LCD screen that wil keep blinking.

2. Pressing the OK button will stop recording.
   • The Blue Indicator in the upper right corer of the camera will stop blinking.
   • The Red icon will disappear, it means the device has stopped recording.

3. Pressing the OK button again will start the device recording again.

Playback Mode:

1. When the device is in the standby status (when recording is stopped), press the OK button about 2 seconds until go to the folder, it means the device is in the playback mode.
2. Press the up/down button to select your desired file. If you want to play a video file, please press the power button to ploy video.

Recording adjustments:

• When recording video, press menu button to lock the current file. The icon will opera on the LCD Display. The locked file cannot be deleted when looping recording
• Press UP button, the microphone will be dosed, press it again will open microphone.

Setting

Video:

1. Press the menu button to enter the Video settings menu.
2. Using the Up/Down Buttons to select and highlight the function you would like to adjust. Press the OK button to enter the subsequent menus.
3. Press menu button again to exit the menu interface.
4. Press the OK button to enter or confirm the settings.

Settings:

• Resolution (To set or reset the resolution of the video):
  Options: With Rear Camera:4K + 2K/2KP60+ 2K/2K + 2K/1080P60+ 2K
  Without Rear Camera:4K/2KP60/2K/1080P60

• Loop recording
  Options: Off/1min/3mins/ 5mins
  Save the video for the setting time. When the card is full, the oldest video will be automatically overwritten.

• Language
  Options: English

• WIFI
  Option: On/Off
  Turn WIFI on and off(For details, please go to page 14 to view)

• Dual cam Display
  Options: Front/Rear/Front & Rear
  Select different screen displays as needed

• Record Audio
  Options: On/Off
  You can set it to On or Off accordingly. If set to Off, the camera will not record the audio.

• G-sensor
  Options: Off/ Low/ Medium/ High
  If the G Sensor is activated, when over limitation braking/ shocking/vibration occurring during recording, the existing recording video file will be automatically locked.

• Date Stamp
  Options: On/Off
  Set to On or Off as desire. If On is selected, the date and time will imprint and record on video.

• Screen Saver
  Options: Off /30 Sec/1 min/3min
  If you set the screen saver time, the screen will enter blank screen according to the setting time to protect screen.

• Time Display
  Options: On/Off
  Turn on/off the time display of the screen saver

• Time System
  Options: 12-hour System/24-hour System

• Date/Time
  Set or reset the actual time and day.

• Beep Sound
  Options: On/Off
  Turn on/off beep sound when press the buttons.

• Parking monitor
  Option: Off /On (Need to connect Hardwire kit. You can contact our after-sale support to get the hardwire kit.)
  If the parking monitoring function is turned on, and the device is power off.
  When the vehicle is impacted by a certain amount of force, the device will automatically start for 15 seconds locked recording, then automatically power off again. And it will start recording again at the next collision, and so on. When the car starts, the recording will become normal loop recording.

• Voice Recognition
  Options: On/Off
  Use your voice to control the camera on command

• Frequency
  Options: 50Hz/60Hz
  To set or reset the frequency of the AC power to reduce interference of fluorescent lights (In the USA and Canada, set it to 60Hz).

• Time zone
  Options: GMT12:OO/GMT-11:OO/GMT-1O:OO/GMT-O9:OO/ GMT-08:00/
  GMT-07:00/GMT-06:00/GMT-05:00/GMT-04:00/ GMT-03:00/GMT-02:00/
  GMT-01:00/
  GMT +00:00/ GMT +01:00/ GMT +02:00/ GMT +03:00/
  GMT +04:00/ GMT +05:00/GMT +06:00/ GMT +07:00/
  GMT +08:00/ GMT +09:00/ GMTT + 10:00/ GMT+ 11:00/ GMT+ 12:00 Select a time zone based on the user’s region. When the machine receives a GPS signal, the machine will automatically update the system time to the latest  time in the current time zone

• GPS Information
  Check GPS signal strength

• Format
  This function will format (erase aJI data) the Micro SD Card.
  Warning: When formatting the card, all files will be erased. Upload all files you would like to save to your PC BEFORE you start to format the card.

• Default Setting
  Reset all settings to factory preset. Please set it carefully, the original personalized setting parameters will not exist after setting.

• Version
  check the device version.

Playback Settings:

• Delete: Delete Current/Delete All
  You can choose delete the current file or all of the files.

Install and use GPS player:

To view the GPS map using a mobile phone APP, you need to download the video file in the Dash Camera to the mobile phone for normal viewing.
Download the player from below link and install ((gxplayer1.3.3) then open GPS video, with the downloaded player to play it.
GPS player download address. http://www.gpsplayer.net/setupzj.html

Connect Computer:

1. Connect the supplied TYPE-C Connection Cable to the TYPE-C Port on the sile of the unit.
2. Connect the full size US8 end of the coble to a US8 Port on the Computer.
3. The unit will automatically power on and display USB modes: “Mass Storage”.
4. Wait a few moments, the storage folder for the unit will appear on the computer screen
5. Follow the on-screen instructions to view, watch, upload or save the files to the PC.

NOTE
Compatible computer operation system: Windows XP, Windows Vista; Windows 7 Windows 8 and Windows 10.

Wi-Fi

APP download address:
IOS system download address:
https://opps.opple.com/cn/opp/roadcam/id1119500688
Android-Download-Address:
https://play.google.com/store/lapps/details?id=com.lg.aroodcams
QR code:

http://www.ligoor.com/app/roadcam/roadcam.html

Download the Road Cam app from your smartphone or tablet in Google Play or Apple App Store. The Wi-Fi application allows you to control your dash camera remotely on a smartphone or tablet.
You can view the video or pictures and download the recordings on your phone.
How to turn on/off the wifi Function?

1. Enter the system setting menu, find the wifi function, and turn on /off the wifi by selecting the wifi function option On/Off.
2. Short press the Down button to turn on the wifi, and long press the UP button to turn off the wifi.
   When the wifi function is turned on, the wifi name and wifi password will be displayed in the upper left corner of the screen.

How to connect to wifi?
First find the wifi name of the driving recorder in the wifi list on the smartphone, enter the wifi password displayed on the screen of the dash cam, and connect to the wifi
Then open the APP, find the device name on the device list on the home page of the APP and click it to enter the operation interface.

Steps to connect to the app:

Step 1:
Tum on wifi on the dash cam.
Step 2:
Open smartphone setting menu and find wifi list.

Step 3:
Open the app on your smartphone, click “Royfoto-S800-00XX”

Specification:

Common Problem and Solution

Q:Recorder shows memory full, unable to loop video, etc.
A:

1. First, When a new memory card is used for the first time on the machine, please format the memory card to FAT32 format on PC then format it in the camera. Second, if the memory card is previously used on another type of device,  it needs to be formatted when it’s used on this camera.Third, change another new Micro SD CARD.
2. Check the sensitivity of G-sensor, If the sensitivity is too high, the bumping and shaking of the camera will activate the G-sensor, and the files will be locked. Locked files cannot be overwritten. If the locked files is accumulated, there will be no memory space to loop record. When the  parking monitor is turned on, shaking will also cause too many stray files, which will also affect the reading and writing of cards.

Q: The device will automatically turn on or turn off.
A:

1. Please format the memory card to FAT32 format on PC then format it in the camera.
2. Check the car charger connection status, if the connection is loose, the power supply is not stable, the camera will automatically tum on and off.

Q:The rear camera dose not display image.
A:

1. Please switch the camera display mode to double check the rear camera status.
2. Please check whether the TYPE-C plug is in place and the cable is connected correctly.
3. Try to disconnect the camera and clean the connector with some Medical alcohol and connect it again.

Q:When shooting video,it will stop automatically or the button operation is slow.
A:

1. First, please reset the device to factory default.
2. Please check whether the memory card is a U3 high-speed card, and please format the momery card on the camera or PC before use.

Q:Even though set the screen saver, but the screen will randomly.

A: The power supply might not be stable, please change another car charger to try.

Q: Why dash cam drain car battery?
A: Please check whether the cigarette lighter still be on after you turn off car engine.

Q: The camera keeps starting and off?
A: That could be the parking monitor function being triggered, check the setup menu.

Q: If the video played on the computer is somehow not fluent or jammed.
A:

1. Try to play the video with other video players, like: Pot player or GX player.
2. Format your Micro SD card in the camera.
3. Run speed test on the memory card to make sure the memory card fits the requirement: Write Speed is over 30MB/S.

Q: There are stripes interference in the image.
There should be wrong light frequency.
A: According to the local main frequency, make the appropriate settings

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>