RUPES Be72n Junction Box Installation Guide
- July 7, 2024
- RUPES
Table of Contents
RUPES Be72n Junction Box Installation Guide
BE72N JUNCTION BOX
BE72N junction box is an accessory integrating the Low Voltage RUPES Product Line as well as the safe and effective means to connect and power 72V RUPES tools employing a standard welder or motor welder.
Using BE72N you will avoid hazardous exposed wiring connections (using nail – electrode – copper hooks, etc.) which are also against safety standards.
BE72N junction box is powered by a single cable and allows the operator to simultaneously use an electrode holder and two tools for typical welding, grinding, cutting or drilling applications without having to carry additional cables.
BE72N junction box is stable, robust and simple to connect. It was designed to comply with the Italian Legislative Decree no. 81/2008 regarding wet or very wet work areas and to operate in contact or within large metal masses.
It is suitable for all kinds construction yard, steel plants, mining platforms, refineries etc. applications.
Total max output: 150 A.
Name and description of components
- Texas 50 female coupling for electrode holder
- Texas 25 female coupling for tool 1
- Texas 25 female coupling for tool 2
- Texas 50 male coupling for power supply
- Ground terminal for tools
Installation
- Connect the motor welder cable fitted with n. 6 female coupling (not supplied) to n. 4 male coupling.
- Connect the electrode holder fitted with n. 7 male coupling (not supplied) to n. 1 female coupling.
- Connect the low voltage tool’s cable fitted with two n. 8 male coupling (mounted on the tool on request) to the two n. 2 or n. 3 female couplings.
- Attach the grounding terminal of the n. 5 tools.
Warnings
BE72N box must be connected only to welder’s or motor welder’s EC approved
output terminals (in compliance with the EN 60974 series standards).
Do not store or use BE72N box in a rainy environment or during rainfall.
In “Construction sites” and “Restricted conductive areas”, safety extra-low
voltage (SELV) limits are set which are lower than the maximum nominal value
of the BE72N junction box; the user must therefore take care to observe these
limits imposed by the CEI 64-8 standard.
BE72N JUNCTION BOX
EU DECLARATION OF COMPLIANCE
Company RUPES S.p. A. declares, under its sole responsibility, that the
product
72 VDC junction box model BE72N complies with the essential requirements
provided by the Directive 2014/35/UE (Low Voltage) and 2011/65/EU (RoHS).
Tests/checks have been carried out in compliance with the current European
Harmonized Standards
EN 61439-1:2011; EN 61439-2:2011; EN IEC 63000:2018
Vermezzo con Zelo (MI), 15/05/2024
RUPES S.p.A
The President
G. Valentini
Via Marconi, 3/A – Loc. Vermezzo
20071 Vermezzo con Zelo (MI) – Italy
Sede legale:
Via Manfredo Camperio, 9 – 20123 Milano – ITALY
S.p.A.
Cod. 9GM13070 – Rev.01 – 06/2024
Tel. +39 02 946941 – Fax +39 02 94941040
Uff. Vendite e assistenza clienti:
tel. +39 02 94694312
e-mail: info_rupes@rupes.it – web: http://www.rupes.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>