cookout Infinity Teppanyaki 240V Stainless Steel Built-In Barbecue Instruction Manual
- June 12, 2024
- Cookout
Table of Contents
cookout Infinity Teppanyaki 240V Stainless Steel Built-In Barbecue
Instruction Manual
MODEL NUMBERS
Type: Model Number:
Infinity Teppanyaki 240V: SSDIE-IT
Record the serial number of your appliance here for future reference:
(The serial number is located on the outside of the packaging and on the
appliance)
READ THESE INSTRUCTIONS BEFORE USE
This manual is an integral part of the appliance. It must be kept in its entirety in an accessible place for the working life of the appliance. This manual and all information contained within must be read carefully and understood before using the appliance.
Installation must be carried out by qualified person in accordance with local standards.
The appliance has been designed for cooking/grilling of food. Any other use is considered unsuitable.
IMPORTANT SAFETY PRECAUTIONS
When using this electric appliance, please observe the following safety requirements:
- Read all instructions prior to operation.
- The barbecue should be installed into a benchtop cut-out as specified in the installation instructions, and it must be installed by a suitably qualified person.
- Do not touch hot surfaces; allow to cool before handling.
- Children must always be closely supervised near the appliance.
- Exercise caution with loose fitting clothing when operating this appliance.
- The appliance must not be used unsupervised by any person with diminished capability.
- Do not modify the appliance or use unapproved attachments.
- The appliance is not intended to be operated by means of an external timer or separate remote-control system.
- Do not leave the appliance unattended during cooking or when heating oil.
- Do not use this appliance for anything other than its intended use.
- Do not use or store flammable materials near this appliance.
- Do not place articles on or against this appliance.
- Do not use aerosols in the vicinity of this appliance while it is in operation.
- Do not use a steam cleaner on this appliance.
- Do not use water to extinguish a fire – use a dry chemical fire extinguisher.
- In the case of malfunction, discontinue use and contact the manufacturer.
- Repairs must only be carried out by the manufacturer or a qualified service person.
INSTALLATION
Assembling your barbecue
- Your Cookout™ Infinity Teppanyaki barbecue is fully assembled and ready to be installed.
- Remove the appliance from the box and dispose of all transit protection material, including plastic, cardboard and polystyrene foam, appropriately.
- Read thoroughly all information provided in this instruction manual.
Installing your barbecue
-
Ensure all packaging and plastic has been removed.
-
Your barbecue is designed to be mounted into a bench top, to be cut to suit as follows:
- A minimum set-back of 80mm is required from the front, and 75mm from the back of the cabinet
-
Your barbecue comes with a removable fat cup which should be attached to the underside of the appliance as shown:
* The fat cup is supplied with a hook which screws into the tube protuding from the base of the appliance.
* Once the hook is in place, attach the cup. It hangs 340mm from the top of the bench to the underside of the cup. Access must be maintained so that the fat cup can be removed, cleaned and replaced. Apply a silicone bead around the outside edge of the barbecue between the stainless steel flange and the bench top, if desired.- If installing next to a gas appliance, there must be separation in the cabinet between the appliances so that any gas leak will not reach the electric teppanyaki.
- The barbecue must be hardwired only by a qualified electrician.
- Installation of your Cookout™ Infinity Teppanyaki barbecue is now complete.
Installing the Infinity Teppanyaki with the gas Infinity Grill
- If the Infinity Teppanyaki is to be installed in a cabinet alongside a gas Infinity Grill barbecue, there are specific installation requirements that must be met.
- A partition is required in the cabinets beneath the appliances and if the Infinity Grill uses LPG, the gas bottle must not be placed in the cabinet beneath the Infinity Teppanyaki.
- Refer to the drawings below and on the following page:
OPERATING INSTRUCTIONS
- Check the power supply is turned on.
- Ensure there is no flammable material on the barbecue plate.
- Turn the temperature control clockwise so the control knob indicator aligns with the high temperature setting.
- Allow between 5 and 10 minutes for the barbecue plate to reach full temperature.
- Place your food on the plate and start cooking. When cooking large amounts of food or thick meat cuts, leave the temperature on high until the meat is seared then assess the rate of cooking and turn the temperature down if required.
- When you have finished cooking, turn the temperature control anti-clockwise to the off position.
- Do not close the lid until the barbecue has cooled down.
DO NOT LEAVE THE HOT PLATE ON HIGH FOR MORE THAN 10 MINUTES IF FOOD IS NOT BEING COOKED.
MAINTENANCE
How to clean your barbecue
The outer body and lid of your Infinity Teppanyaki barbecue are manufactured from quality 316 marine grade stainless steel, and the plate is made using duplex grade stainless steel. As its name suggests, ‘stainless’ steel stains less than steel but it must be cleaned regularly. If the barbecue has not been cleaned for long periods, you may notice a brown discolouration starting to form on the stainless steel surfaces – this is called tea-staining and it can be prevented by following this cleaning guide.
External cleaning
- The exterior surfaces should be cleaned or wiped down regularly to prevent tea-staining and to prolong the high finish of the stainless steel.
- If tea-staining occurs it should be attended to in the early stages as it will be much easier to remove. If left, it will gradually get worse until it turns into rust.
- Washing the exterior of the barbecue using a wet cloth and warm soapy water will help to remove general contamination found in the air such as dust, dirt and salt. Do not pour water directly over the barbecue.
- When applied to the external surfaces, silicone-based polishes are ideal to help the stainless steel form a protective layer to prevent tea-staining and rusting. Apply and work the polish with a soft cloth then remove the polish with a second, clean, soft cloth. Do not use silicone based products on the cooking surface.
Cleaning the barbecue plate
- After cooking and while the barbecue plate is still hot, pour a small amount of water onto the plate. Let the water steam and scrape off excess burnt food with a barbecue scraper. Do not pour too much water onto the plate – ensure that the fat cup does not overflow (take care as the contents of the cup may be hot).
- Blackening and burning of the stainless steel plate are normal and cannot be prevented when using the barbecue. To remove burn marks, mix a small amount of white vinegar and water together and pour onto the plate. Work this into the surface with a nonscratch scouring pad to bring the plate back to its original finish.
- Do not use a scouring pad on the stainless steel body, surround or control panel as it will damage the stainless steel surface, leaving it prone to rusting.
- Do not use steel wool on any part of the barbecue.
FAILURE TO PROPERLY MAINTAIN YOUR BARBECUE WILL VOID WARRANTY
INSTRUCTIONAL VIDEOS
Please visit our You Tube channel for information and ideas:
Cookout Barbecues
https://www.youtube.com/results?search_query=cookout+barbecues
WARNING
- Conduct a visual inspection for damage prior to each use – look for damaged plugs or cords, debris and signs of impact.
- If the appliance does not appear to be working properly, seek help from a suitably qualified service person.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
- Charcoal or similar combustible fuels must not be used with this appliance.
- Power to the appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30mA.
- The appliance should be unplugged when not in use.
Electrical specification
SERVICING
This barbecue must only be serviced by a suitably qualified person.
If you have any questions regarding the operation or maintenance of this
appliance, please contact the manufacturer.
CONTACT US
Your CookoutTM Infinity Teppanyaki barbecue is proudly manufactured in Australia on the Gold Coast by Southern Stainless Pty Ltd. Please contact us if you have any questions relating to the installation, operation or maintenance of this appliance.
Cookout BBC’s are proudly manufactured by:
SOUTHERN STAINLESS PTY LTD
39 Notar Drive, Ormeau OLD 4208 PO Box 538, Ormeau OLD
4208 +61 7 5549 0560
sales@southernstainless.com.au
www.southernstainless.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>