LUMME LU-3620 Hot Plate User Manual
- June 11, 2024
- LUMME
Table of Contents
LUMME LU-3620 Hot Plate
Product Information
The LU-3620 is a hot plate with a stainless steel housing and a 13 m diameter burner. It has a power supply of 230 V ~ 50 Hz and a power of 2500 W. The hot plate also features a heating indicator and temperature control switch. The product is produced by Cosmos Far View International Limited and made in China.
Usage Instructions
- Before the first use, make sure to clean the appliance.
- Connect the hot plate to a power source of 230 V ~ 50 Hz.
- Turn on the hot plate using the temperature control switch.
- Adjust the temperature according to your needs and wait for the heating indicator to turn off.
- Place your cookware on the burner and start cooking.
- After use, turn off the hot plate using the temperature control switch.
- Unplug the hot plate from the power source.
- Clean the hot plate with a damp cloth and dry thoroughly before storing.
Please refer to the manufacturer’s website for more information or contact their customer support at 8(812)325-23-48 or 8(812)325-23-34.
Parts list
- Stainless steel housing
- Burner
- Heating indicator
- Temperature control switch
IMPORTANT SAFETY INSTRUCTIONS
Read this manual carefully before using the appliance and save it for future reference.
- Before first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not operate any product with damage.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
BEFORE THE FIRST USE
- Remove all packing material from the appliance.
Before using your Hot plate for the first time, turn the Hot plate on the highest position 5 for 5-10 minutes to condition the protective coating. This should be the only time the hot plate is turned on without a cooking utensil on it. Some parts of the cooking plate have been slightly greased and as a result the unit may slightly smoke when switched on for the first time. After a short time this will cease.
INSTRUCTION FOR USE
- Place the appliance on a flat, stable surface, able to hold its weight with the food to be cooked on it.
- Turn the temperature control switch to “0” (OFF).
- Plug in the appliance.
- Turning the temperature switch, choose the necessary heating mode: from 1 (slow heating) to 3 (the highest temperature available).
- The LED light will go off when the burner reaches the selected temperature and will cycle on and off to maintain the temperature.
- Cooking pots and pans should have flat bottom, their dimensions should be identical with those of the burner.
- Switch the unit off or to a lower heating mode in good time in order to save energy. The burner will still emit intensive heat for a few minutes, which can be used to complete the cooking process.
- The cooking plate is equipped with a thermostat that prevents overheating. Nevertheless, you should always switch off the unit after cooking: turn the temperature control switch to the “0” position and unplug the appliance.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
SPECIFICATION
- Model: LU-3620
- Power supply: 230 V ~ 50 Hz
- Power: 2500 W
- Burner diameter: 13 сm
Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA Made in China
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.) The production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.