sentiotect S-WIFI02 MySentio Remote Instruction Manual

: June 9, 2024
: sentiotect

sentiotect S-WIFI02 MySentio Remote

sentiotect S-WIFI02 MySentio Remote

About this instruction manual

Read these instructions for installation and use carefully and keep them within reach of the device. This ensures that you can refer to information on safety and operation at any time.

These installation and operating instructions can also be found in the downloads section of our website: www.sentiotec.com/downloads.

Symbols used for warning notices

In these instructions for installation and use, a warning notice located next to an activity indicates that this activity poses a risk. Always observe the warning notices. This prevents damage to property and injuries.

ATTENTION!

This keyword is a warning that damage to property can occur.

Other symbols

This symbol indicates tips and useful information.

Product description

Scope of delivery

My Sentio Extension Box
My Sentio WiFi
2 pc. 1 m Ethernet cable, 8-pin RJ45
Installation material
Assembly instructions

Optional accessories

Door sensor system (1-052-722 / SAB00102)
Door sensor set (1-052-723 / SAB00103)
Safety shutdown (SFE-xxxxx)
Power supply LED 40 W / 24 VDC (1-052-972 / LED-PWS-24-40)

Product features

The MySentio Remote allows you to start the sauna or steam generator via devices such as smartphones and tablets. This is done using the MySentio app in a local network (WiFi), which is available free of charge for Android (Google Play Store) and for iOS (App Store). The subscription is free of charge for 3 years, after which fees may apply.

Compatible sauna control units:

wave.com4 11 kW (1-049-633 / WC4-B-11)
SGH (1-050-578 / SGH-45; 1-050-579 / SGH-60; 1-050-580 / SGH-90; 1-050-581 / SGH-110; 1-050-582 / SGH-150)
HGD (1-047-553 / HGD45; 1-047-558 / HGD60; 1-047-559 / HGD90; 1-047-560 / HGD110; 1-047-561 / HGD150)
home.com4 (1-040-275 / HC4-B; 1-040-276 / HC4-W)
Pro B2 (1-015-455 / PRO-B2)
Pro B3 (1-015-457 / PRO-B3)
Pro C2 (1-015-448 / PRO-C2)
Pro C3 (1-015-451 / PRO-C3)
Pro D2 (1-041-288 / PRO-D2)
Pro D2i (1-041-291 / PRO-D2I)
Pro D3 (1-041-293 / PRO-D3)
Pro D3i (1-041-295 / PRO-D3I)

Installation and connection

Work may only be carried out when the power has been disconnected. During installation, observe the technical data on Page 12.

ATTENTION!

Interference can impair signal transmission

Route all data cables separately from other mains cables and control cables.
Protect cables with only one layer of insulation by using a conduit (double insulation).

Secure the WiFi module 1 somewhere near the sauna control unit and within the range of its network (WiFi) using the screws provided.
Sentiotec WiFi is connected to the sauna control unit using the 8-pin Ethernet cable in accordance with the following diagrams:

ATTENTION!

Damage to the device!

Installation of the app and input of the settings (see “5. Operation” and “4. Commissioning”) must be completed before the sauna control unit is switched on.

Mounting My Sentio Wifi and Remote

Installation and connection

Connecting MySentio Remote

Connection via terminals: the optional power supply unit is required for the power supply of the MySentio Extension Box OR
connection via RS485 socket

ATTENTION!
Damage to the device!

The MySentio Remote must never be directly connected to the router.

Connection to wave.com4 11 kW

Installation and connection

When connecting the safety shut-off/door sensor, follow the instructions of the respective device

Connection to steam generator SGH and HGD

Installation and connection

In the settings, the “Selection of remote start function” function must be set to I-O

Connection to home.com4

Installation and connection

Make the setting in the technician menu under menu item Mode RS1.

Connection to Pro series (Pro B2/3, Pro C2/3, Pro D)

Installation and connection

4 Connection to S/B….Remote start of sauna operation / user program 1 Connection to C/B….Remote start of combination mode / user program 2
5 Safety shut-off/door sensor

When connecting the safety shut-off/door sensor, follow the instructions of the respective device

To activate remote start, refer to the operating instructions for the respective control unit.

Download the “MySentio” app onto your smartphone or tablet
► Open the app and sign up.

Android
► Following the instructions provided in the app

IOS
Signing up (Fig. 1–3):
► Complete all fields and make a note of the email and password you use.
In case you have forgotten your password, simply enter the email address you used when you registered. You will then be given instructions on how to change the password.

Add a new device: (Fig. 4–5):

Commissioning

Select your device and tap the switch below it.(Fig. 6)
Connect the WiFi to the smartphone by pressing the pairing button. (Fig. 7)
Rename the device and wait until the app has finished loading. (Fig. 8)
Enter the serial numbers of your devices. (Fig. 9)

Operation

Devices – switch between devices or add new devices.
Settings – see page 10
Status – status display (standby, on, off)
Oven – oven on/off
Devices – back to the Home menu
Profile – see page 11

The MySentio Remote can only switch the heater on/off. (NO colour light, user program, light, etc.)

DANGER!

Make sure that no flammable objects are ever left on the sauna heater
when the sauna cabin is put into operation.

Settings

Operation

Device settings – see 5.3.
All off – switches off all switchedon functions and consumers at once.

Device settings

Operation

Time zone – selection of the relevant time zone
Reconfigure WLAN – configure WLAN connection of the Wifi module
Firmware updates – suggests new app versions.
Info – query information, such as: software version, device type, etc.
Rename – rename the device in the app.
Remove – remove the device from the app.

Device settings

Operation

Profile – you can change the following information:
► First name
► Last name
► Email address
► Remove profile
Language – select language
GTC – general terms and conditions
Privacy policy – data protection guidelines
Licence agreement – end user licence agreement
Licences – open source licences
Logout – log out of your profile
Version – current version of the app

Maintenance

The device is maintenance-free. An internet connection is used to update it automatically.

Disposal

Dispose of packaging materials in accordance with the applicable waste disposal regulations.
Used devices contain reusable materials as well as hazardous substances. Therefore, do not dispose of your used device with household waste, but do so in accordance with the locally applicable regulations.

Technical data

MySentio Extension Box

Ambient conditions

Ambient temperature: -0 °C to +70 °C
Protection class (protected against splashing water): IP65
Minimum requirement WiFi 2.4 GHz: 1 Mbit

Control unit

Dimensions: 85 x 85 x 37 mm
Operating voltage: 24 V DC max. 3 W
Switching capacity: max. 250 V 4 A

Connection cables

Power supply via screw terminal / Ethernet cable: 24 V DC / 0.1 A

MySentio WiFi

Ambient conditions

Ambient temperature: -0 °C to +70 °C
Protection class (protected against splashing water): IP 20
Minimum requirement WiFi 2.4 GHz: 1 Mbit

Control unit

Dimensions: 83 x 56 x 24.5 mm
Operating voltage: 24 V DC max. 3 W

Connection cables

Power supplied by Ethernet cable: 8-pin RJ45 max. 3 m

Problem solutions are available in the MySentio Wifi instruction manual under the following link:

www.sentiotec.com/de/downloads/bedienungsanleitungen

GLOBAL
HARVIA
P.O. Box 12, Teollisuustie 1-7,
40951 Muurame, FINLAND
T +358 207 464 000
harvia@harvia.fi | www.harvia.f

RUSSIA
Адрес уполномоченного лица:
ООО «Харвия Рус»
196006, Россия.Санкт-Петербург г,
пр-кт Лиговский, д. 266, стр. 1, помещ.
2.1-Н.50 | ОГРН 1157847200818
T +78123258294 | spb@accountor.ru sentiotect
Logo