LUTRON CP-3000 Flexible 3000 Amp Current Probe Instructions

: June 12, 2024
: Lutron

Table of Contents

LUTRON CP-3000 Flexible 3000 Amp Current Probe
Product Information
Features
Specifications
Product Usage Instructions
FRONT PANEL DESCRIPTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUTRON CP-3000 Flexible 3000 Amp Current Probe

Product Information

Product Name: Flexible 3000 Amp Current Probe
Model: CP-3000
Manufacturer: LUTRON ELECTRONIC
Certifications: ISO-9001, CE, IEC1010

Features

Range: 30 A/ 300 A/ 3000 A
Output Sensitivity: 100 mV/ A, 10 mV/ A, 1 mV/ A
Output Voltage: 3 ACV (30 A, 300 A, 3000 A)
Flexible Probe Length: 600 mm (23.6 inches)
Optional current probe for DW: 6093, DW-6095
- When change the new probe, the calibration procedures are not necessary to be executed.
- Signal output use the banana plugs, durable and safety.
- Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary.

Battery power, AC to DC adapter power

30 A/300 A/3000 A, 100 mV/A, 10 mV/A, 1 mV/A
For 3 phase power analyzer DW-6093, DW-6095

Specifications

Measurement Ranges: 30 A/ 300 A/ 3000 A 3 ranges, switch selectable
- 1st range value : 30 A
- 2nd range value : 300 A
- 3rd range value : 3000 A
Output sensitivity : 100 mV/A, 10 mV/A, 1 mV/A, AC coupled.
Frequency Range: 45 to 400 Hz
- Accuracy tested under 50/60 Hz.
Accuracy: ± 1% of range value Linear to 100% of range value
- Accuracy is specified that the measured conductor’s position is on the center of ” Flexible current probe “.
- 50/60 Hz..
- 23 ± 5 ℃
Phase error: < ± 1.5°
- 50/60 Hz..
Conductor position sensitivity: ± 2 % of range value.
- Recommend the measured conductor position should > 25 mm ( 1″ ) away from the ” Probe locker “.
Linearity : ± 0.2 % of reading value from 10 %to 100% of range value.
External field influence: increase ± 1.5 % of range value max..
- Recommend the distance between different ” Flexibel current probe ” should > 200 mm ( 8″ ).
Minimum load : 100 K ohm for specified accuracy.
Enclosure material : UL 94-V0 rated.
Safety: IEC 1010, Categories III 600V.
Power Supply : Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary.
- Power supply voltage from DW-6093, DW-6095 is DC 8V± 1V
Operating Temperature: 0 to 50℃℃ ( 32 t℉o 122 ).℉
Operating Humidity : Less than 80% RH.
Dimension:
- Main circuit unit :
  105 x 56.5 x 33 mm.
  ( 4.1 x 2.2 x 1.3 inch ).
- Flexible probe :
  600 mm x 14.5 mm DIA.
  23.6 inch x 0.57 inch DIA.
- Cable length :
  3.4 meters ( 11.2 feet ).
- DC plug size :
  5.5 mm x 2.5 mm DIA.
Weight: 480 g ( 1.06 LB ).
Accessory Included: Operating manual …………………1 PC.
Enclosure Material: UL 94-V0 rated

Product Usage Instructions

Ensure the power supply is connected to the meter (DW-6093, DW-6095). The probe does not require a separate battery.
Connect the signal output plug (+, red) and signal output plug (-, black) to the appropriate ports on the device or instrument you are using.
Set the desired measurement range using the 3000A/ 300A/ 30A range switch on the main circuit unit.
Position the flexible probe around the conductor you wish to measure. It is recommended to keep a distance of at least 25 mm (1 inch) between the measured conductor and the probe locker.
Ensure there is a distance of at least 200 mm (8 inches) between different flexible current probes to avoid external field influence.
Make sure the measured conductor’s position is on the center of the flexible current probe for accurate measurements.
Verify that the power LED lamp on the main circuit unit is illuminated, indicating that the device is powered on.
Read the measurement values from the device or instrument you are using, taking into account the output sensitivity and voltage specifications mentioned in the product information.