CASETiFY POWERTHRU 2 In 1 Magsafe Compatible Charging Stand User Manual

CASETiFY POWERTHRU 2 In 1 Magsafe Compatible Charging Stand

Product Information

Cable,
1 User Manual
Compatibility| This wireless charging base is optimized to work with devices
with Qi wireless charging technology. Magnetic Snap function
compatible with iPhone 12 and later series.

Product Usage Instructions

Step 1: Connect Power Supply
Before use, connect the power supply via the provided USB-C cable. Please note that the power supply is not included in the package.

Step 2: Place Mobile Phone and Earbuds Case
Place your mobile phone and earbuds case to the appropriate charging location on the charging stand. The stand supports both portrait and landscape modes.

Specifications

Important Safety Instructions
Please read all instructions and warnings prior to using thisproduct. Improper use of this product may result in product damage,excess heat, toxic fumes, fire, or explosion, for which damages you, Purchaser, and Manufacturer are responsible.

LED Indicator

The LED indicator on the charging stand provides the following information:

• LED On For 5 Seconds: Indicates that the charging stand is connected to the power supply.
• Breathing Light: Indicates that the charging stand is currently charging the connected device.
• Blinking Light: Indicates an abnormal charging condition or detection of a foreign object.

PACKAGE CONTENTS

• 1 PowerThru™ 2-in-1 Wireless Charging Stand
• 1 Charging Cable
• 1 User Manual

PRODUCT OVERVIEW

1. Magnetic Charging Pad
2. LED Indicator
3. Earbud Charging Pad
4. USB C Charging Port

INSTRUCTIONS

Step 1

Before Use
Connect power supply via USB-C Cable * Power supply is not included

Step 2
Place your mobile phone & earbuds case to appropriate charging location.

SPECIFICATIONS

• Model No CTF-T-ATE-232120FRE
• Product CTF-T-ATE-232120FREWHX
• Input 5V 3A/9V 3A/12V 2A
• Output 1 5W / 7.5W / 10W / 15W Max
• Output 2 5W Max
• Charging Distance ≤6mm
• Frequency Band 110k Hz – 205k Hz
• Working Temperature 0 – 40°C
• Storage Temperature -10 – 60°C
• Size 165 x 92 x 92 (mm)
• Weight 360g

Compatibility
This Wireless charging base is optimized to work with devices with Qi wireless charging technology. Magnetic Snap function compatible with iPhone 12 and later series.

LED INDICATOR

• LED On For 5 Seconds: Connected to power supply
• Breathing Light: Charging
• Blinking Light: Abnormal charging/foreign object detected

IMPORTANT SAFETY INSTRUCTION

Please read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you, Purchaser, and Manufacturer are responsible.

• Do not store device in high-temperature environment, including heat sources and intense sunlight. Do not place device close to fire or other excessively hot environments.
• Do not expose the wireless charging stand to humid environment, including rain or snow.
• Do not use the wireless charging stand in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons
• Do not disassemble or modify this product
• Do not attempt to replace any part of this product
• All products have gone through a thorough quality assurance inspection. If your product is found excessively hot, is emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer.
• To comply with FCC RF exposure compliance requirements, the wireless charging stand must be used with a separation distance of at least 20 cm from all persons
• Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
• The wireless charger will automatically switch off when disconnected from power supply, switch off the wireless charging stand when not in use.

NOTE:

This device complies with part 15 of the FCC Rules and contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The distance between user and products should be no less than 20cm. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

ISED STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.
The said legal communications means radio communications is operated in compliance with the Telecommunications Management Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

WARNING:
Cancer & Reproductive Harm www.P65Warnings.ca.gov

FCC ID: 2ASRV-232120FRE
IC: 26753-232120FR
KC: R-R-YFI-CTF-T-ATE

CASETAGRAM LIMITED
18/F, NEO, 123 Hoi Bun Road, Kwun Tong, Hong Kong www.CASETiFY.com
Made in China

References

• Show Your Colors | CASETiFY
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>