beper P204CAL001 Ironing System Instruction Manual

: June 3, 2024
: beper

Table of Contents

Precautions
Product description
Mode use
Cleaning
Technical data
DISPOSAL
GUARANTEE CERTIFICATE
GUARANTEE CONDITIONS
PRODUCT
- Steam Iron
- Usb rechargeable lint remover
Documents / Resources

beper P204CAL001 Ironing System

P204CAL001 Ironing System

Precautions

Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded. Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after- sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids. Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children. Some warnings When it is on or cooling down, keep the iron and its cord out of reach of children.
Some warnings
When it is on or cooling down, keep the iron and its cord out of reach of children Before filling the appliance with water and before removing the remaining water after use, disconnect the plug from the electrical socket. The appliance must be used and placed on a stable, flat and heat resistant surface. Do not use the iron if it has been dropped, if it has visible signs of damage or if water is coming out. It must then be checked by an authorized technical assistance service before using it again.
As soon as you have finished using the product, remember to disconnect the plug from the power supply. Do not leave the iron unnecessarily powered. Do not open the fuel cap when the product is in operation. After removing the packaging, check the integrity of the appliance, in particular the power cord Do not use adapters, multiple sockets and / or extensions, especially in rooms used for bathing or showering.
Do not use the appliance if it is damaged in the power cord or plug. Do not use the iron near water. Do not immerse the product in water or other liquids, If the appliance falls into water, disconnect the plug and remove it from the water. Do not put the appliance into operation before having it checked by an authorized technical service centre. This recommendation also applies in the event that the power cord or the appliance is damaged or if the appliance has fallen into the ground.
Do not use the appliance in the presence of explosives, highly flammable substances, gases or open flames.
Do not leave the cord hanging from the edge of the worktop or near hot surfaces.
Do not leave the appliance exposed to atmospheric agents such as rain, wind, snow, hail etc. Do not use outdoors. This appliance must only be used for domestic use for which it was expressly designed. Any other use is to be considered improper and therefore dangerous. The manufacturer cannot be responsible for any damage resulting from improper, erroneous or unreasonable use.

Do not leave the iron unattended when connected to the network.
Caution! Do not open the tank cap when the appliance is in pressure!
Warning: this symbol indicates: hot surface when the product is in operation.

Product description

Fig.A

Iron base
Iron connection cable (supply cable + steam hose)
Power cable
Boiler on/off switch
“Steam ready” light
Iron on/off switch
Boiler safety cap
Tank
Thermostat knob
Steam and continuous steam button
Thermostat light

Mode use

**Attention: iron only on surfaces resistant to heat and on surfaces that allow the passage of steam, such as ironing boards specific for this type of ironing.
Note: the iron is designed to use tap water, however, if the water is very hard, it is advisable to use a mixture of distilled water and tap water.**
Unscrew the safety cap and fill the tank with about 0.75 litres of water with the help of the funnel and make sure it does not overflow.
Screw the cap back and make sure it is firmly closed, otherwise it is possible to run risky steam leaks around the cap. Plug the power cord into a power outlet.
Turn on the iron and the boiler using the appropriate switches.
Once finished ironing, wait for the entire ironing system (iron and boiler) to cool down and drain the water left in the tank.
Temperature setting Always consult the washing and ironing label inside the items to be ironed.
The number of dots shown in the adjustable iron thermostat indicate the temperature from the lowest (•) to the highest (•••).
If you do not know the type of fabric to be ironed, it is advisable to iron part of it, normally not visible when the item is worn, starting from the minimum temperature, then finding the most suitable temperature. It may happen that the garment becomes shining, in this case it is necessary to suspend the ironing in order not to ruin it and to iron the fabric on reverse.

Attention: pay close attention to the symbol : the fabric (garment) must not be ironed.

Steam ironing

Note: the steam indicator light may, from time to time, turn on and off during use of the boiler. This is completely normal and indicates that the machine is maintaining a correct and constant pressure. Connect the electric cable to the sock et.
Set the iron temperature to maximum. Switch on both switches (iron and boiler). Wait for the “steam ready” light to come on. Press the “steam shot” button on the iron: a shot of steam will come out of the holes in the plate, the intensity of which can be adjusted using the special knob. By pressing the steam button and moving back the lever located in the centre of the same, you can lock the continuous steam button, if you want to iron continuously with the steam jet. To unlock, push the lever slightly forward. (Fig.B)

Note: in the absence of water it will not be possible to generate steam, it will be necessary to recharge the tank as indicated in the specific paragraph.
It is recommended to refill the tank when it is completely cooled. In any case, we recommend carefully pouring only small amounts of water at a time to avoid the risk of it escaping violently if the tank is still too hot. During the initial operation of the iron and until the temperature has stabilized, some drops of water mixed with steam may escape from the plate. It is therefore advisable to direct the first jets onto an old cloth until the steam is uniform and stable.

Dry ironing **

**

Connect the cable to the power outlet, turn on only the iron switch. Adjust the iron temperature by turning the thermostat knob to the desired level.
When the thermostat light switch off, the set temperature has been reached and the iron is ready for dry use.
Safety cap The appliance is equipped with a safety cap that prevents children from opening the tank which, in the presence of residual pressure inside it, would be very dangerous. This is an important and indispensable safety device which, together with a correct tank refilling procedure, will make the use of the iron and boiler safer.

Filling the tank

When the water in the tank is finished (no more steam comes out), refill as follows: Position the knob on the maximum steam intensity. Press the “steam shot” button so that the residual steam in the tank comes out completely. Completely switch off the ironing unit (iron and boiler) and disconnect the plug from the socket. Press and at the same time unscrew the cap of the tank and wait a few moments for the tank temperature to decrease. Pour 0.75L of water into the tank through the use of the funnel. Screw the cap back and make sure to close it completely. Turn the iron and boiler on again.

Cleaning

Before proceeding with any maintenance operation, always make sure that the appliance is disconnected from the mains and completely cooled. Internal tank cleaning You can use normal tap water. However, since the water naturally contains limestone which causes scale in the tank, to clean it we recommend the use of a solution of water and vinegar (75% water + 25% vinegar), to be left in the tank for a few hours and then remove it. External cleaning of the appliance Use a damp cloth to clean the housing of the appliance. Do not use solvents or detergents to avoid damaging the body of the appliance.

Technical data

Power: 1900-2300W
Power supply : 220-240V ~ 50/60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

DISPOSAL

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance.
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

The appliance has been used properly and for the purpose for which it has been intended.
The appliance has not been tampered with, otherwise it is not maintainable.
The purchase receipt shall be presented.
The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department Beper. E-mail assistenza@beper.com which will forward your enquiries to your distributor.

PRODUCT

Steam Iron

Cod.: P204FER003
Wide stainless steel soleplate Continuous and vertical steam function Spray function and super steam shot Adjustable steam and temperature intensity Self- cleaning, anti-drop and anti-calc device Dry and steam ironing mode 2600W
P204CAL001 Ironing System Steam Iron