IKIMI CSJ1200-A02 Dog Grooming Vacuum and Blow Dryer User Guide
- June 17, 2024
- IKIMI
Table of Contents
ALL IN ONE
PET GROOMING & CARE MACHINE support@ikimidirect.com
Grooming Machine
| Electric clipper
---|---
| Cleaning nozzle
| DeSheding tool
| Grooming brush
| Massage brush
TURN ON
After the power line of the machine is connected to the power supply. start
from the ON / OFF” position, turn the knob clockwise, first hear the obvious
“bee” sound, at this time turn on the power switch of the motor, start up
successfully.
Caution
Pease turn off the heating function when using the dust/hair suction function,
ACCESSORY INSTALLATION
Connect the fitting hose to the air inlet hole of the storage cup, select the appropriate comb or dust suction suction accessories as required, align the groove of the hose ring buckle, tighten the ring buckle, the installation is complete.
WIND SPEED ADJUSTMENT
Turning the speed control knob slowly to adjust to the appropriate wind speed,
Warning: Before regulating the wind speed, please take the handle of the
fur suction accessories to avoid the hose from moving cause accidents.
Special Note
It is recommended to use a low range of wind speed (-3 geors) The lower the
wind speed, the better the silent effect.
TURN OFF
When the machine is working normally, turn the knob counter clockwise (“ON / OFF” direction) until you hear a clear “bee” sound, the machine is power off.
CLEAN UP STORAGE CUP
when the hair in the storage cup has covered, then turn the machine off, and press the buttons on both side in meantime, remove the filter element, and clean up the hair and trash inside the storage cup.
FILTER ELEMENT MAINTAIN AND CLEANING
After removing the filter element from the hair storage cup, clean it up for future use.
Caution
- After washing the fitter element, be sure to dry it before use, otherwise it will damage the machine.
- The filter element must be placed before use, otherwise the hair will damage the machine.
Blow Dryer
INSTRUCTIONS FOR USE
Preparation before use
Insert the air outlet hose into the air outlet of the blower and tighten it
clockwise, and turn the speed control knob to ON/OFF
Install blower nozzle
According to the needs, select the appropriate blower nozzle and rotate it
dockwise.
Turn on
After the power line is connected to the power supply, start from the ON/ OFF
position, turn the knob clockwise until you hear a tik” sound, then it starts
successfully. We recommend that you use it from the lowest setting so that
your hairy friend can get used to it better.
The power must be started before the heating function can be started, After
the motor starts, the negative ion function starts directly.
Adjust wind speed
Turning the speed control knob slowly to adjust to the appropriate wind speed.
Warning:
Be sure to hold the hose handle firmly before adjusting the wind speed to
avoid accidents caused by hose movement.
Heating function
When the machine is in operation status, push the heating switch to the first
gear, second gear or third gear to turn on the heating function, and the
heating function will not start at the 0th gear.
The first level heating power is 300W, the second gear heating is 500W, and
the third gear heating is 800W.
Turn off
When the machine is working normally, turn the knob counter clockwise (“ON /
OFF direction) until you hear a dear “bee” sound, the machine is turned off,
the machine is powered off, and the negative ion function is turned off
(version with negative ions).
Clean the filter
When the hair in the storage cup has covered, then turn the machine off, and
press the buttons on both side in meantime, remove the filter element, and
clean up the hair and trash inside the storage Cup.
Special Note:
- For safety reasons, turn the speed control knob to OFF before starting the fan
- Ont after fan is turned on can you turn on the heating function
FUNCTION DESCRIPTION
BASIC PARAMETER INFORMATION
Rated Power | 1500W |
---|---|
Rated Voltage | 110-120V |
Rated Frequency | 50/60Hz |
Product Size | 40X18X15cm |
Net Weight | 3.7kg |
Negative oxygen ions | 10/pcs/cm’ |
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
Contact you local government for information regarding the collection systems
available.
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
your health and well-being.
SAFETY WARNING
-
The applicable voltage of this machine is 110V-120V 50/60Hz.
-
Be sure to use the power socket with safety standards and capacity (>10A is recommended), and it should be used separately from other electrical appliances.
-
Do not use this product near textiles, flammable objects, or flammable gases (such as liquefied petroleum gas, volatilizers, paint thinners, sprays, etc.) to avoid accidents.
-
Do not block the air outlet and air inlet with your fingers or other objects during use, and clean it in time after use to avoid the accumulation of grease and other residues.
-
Please clean the air inlet regularly to ensure unobstructed air inlet and prolong the service life of machine.
-
It is strictly forbidden to leave when the machine is working. When you have finished using or encounter a power outage during use, please adjust the speed control knob to the minimum gear, and then pull out the plug from the socket.
-
Avoid letting the machine fall or suffer from strong impact.
-
Do not connect any accessories from other brands with our machine to avoid accidents.
-
Please check the condition of the power cord regularly, Please stop using it if you find that the plug, power cord, or the machine itself is damaged.
-
This machine is not intended for use by children, the physically disabled, the unresponsive and the mentally challenged unless a guardian supervises and directs the use of the machine and is responsible for the safety of the user.
-
Please keep the machine out of the reach of children.
-
Do not use thinner, benzene or other solvents to clean the machine.
-
Do not disassemble yourself if any abnormality or malfunction occurs during use.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge
If they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. -
Cleaning and user maintenance shall not be made by children without supervision, If the power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department, or similar departments to avoid danger.
-
If you use the machine in the bathroom, please unplug it after use since the proximity of water presents a hazard even when the appliance is switched off,
-
If you use the machine in the bathroom, please unplug it after use since the proximity of water presents a hazard even when the appliance is switched off,
-
When the machine is not in use, first unplug it from the outlet before cleaning
-
Do not use it near water-filled bathtubs, washbasins, etc., and do not use it with wet hands.
100% CUSTOMER SATISFACTION GUARANTEED
CUSTOMER SERVICE: support@ikimidirect.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>