LUTRON RA2 Select Main Repeater Hub User Guide
- June 12, 2024
- Lutron
Table of Contents
RA2 Select Main Repeater Hub
User Guide
Quick-start
guide
RA2 Select Main Repeater Hub
RA2 Select Main Repeater
Please read before installing Contents supplied:
RA2 Select Main Repeater*
(RR-SEL-REP2)
5V= 300 mA Power Supply
(T-5DC-USB)
Input: 100-240 V~ 50/60 Hz 100 mA
Output: 5 V== 550 mA Ethernet Cable
- Connected to a Class 2, LPS, or SELV, limited energy (<15 W) power source only.
Extend Your Warranty
Love Lutron products? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year. www.lutron.com/RegisterRA2Select
Install the RA2 Select Main Repeater
A. Connect the Main Repeater to your Wi-Fi router using the Ethernet cable.
B.
Connect the power cord to the Main Repeater and plug it into an outlet.
Download the Lutron app and walk through setup
Note: The
RA2 Select Main Repeater cannot be used with the RadioRA 2 PC-based
programming software.
Accessory Setup Code
Warranty
For warranty information, please visit
www.lutron.com/warranty
Lutron, Lutron, and are trademarks of Lutron Electronics Co., Inc. registered
in the U.S. and other countries. RadioRA 2 is a trademark of Lutron
Electronics Co., Inc.
Apple is a trademark of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc., registered in the U.S.
and other countries. Google Play and the Google Play logo are trademarks of
Google Inc.
©2017 Lutron Electronics Co., Inc.
Customer Assistance
U.S.A. and Canada: 1.844.LUTRON1
Fax: +1.610.282.6311
Mexico: 1.888.235.2910
Other countries: +1.610.282.3800
www.lutron.com/support 0301866 Rev A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>