Luminii RGBW-PXSPI 85 Plexineon Rings Suspended Mount Installation Guide

Luminii RGBW-PXSPI 85 Plexineon Rings Suspended Mount

Product Information

The Plexineon Rings Suspended Mount is a lighting fixture available in RGB, RGBW, and RGBW Pixel options. It comes with or without a mounting clip and A/C hardware. The ring outer diameter varies depending on the model. The efficacy of the fixture ranges from 14.7 lm/W to 17.5 lm/W, and the lumen output and power consumption vary according to the model and color temperature.

The fixture is available in various finishes, including Matte Black, Matte White, Matte Grey, and Gloss Grey. It can be suspended using standard clips or decorative clips, and a powerfeed canopy suspension kit is used for installation.

The product is designed with different ring types, such as the Horizontal Ring, which provides forward light direction. Additional materials, such as joiner clips, A/C cables, and quick connect cables, are available for installation and customization.

Product Usage Instructions

1. Choose the desired Plexineon Rings Suspended Mount model based on your requirements for color and functionality.
2. If necessary, select the appropriate mounting clip and A/C hardware option.
3. Determine the ring diameter needed for your installation.
4. Select the desired finish for the fixture, such as Matte Black, Matte White, Matte Grey, or Gloss Grey.
5. If using standard clips, install them approximately every 30 inches of linear/arc length. If using decorative clips, install them approximately every 18 inches of linear/arc length.
6. Use the provided powerfeed canopy suspension kit to join fixtures together in the middle and at the start of each suspended run.
7. If necessary, use additional materials like joiner clips, A/C cables, and quick connect cables for customization and installation.
8. Refer to the product manual for detailed instructions on connecting and wiring the fixture.

Note: It is important to follow the specific guidelines and recommendations provided in the product manual for safe and proper installation of the Plexineon Rings Suspended Mount.

• Easy to install, for interior and exterior accent lighting
• Neon look providing a crisp, clear line of light visible for miles
• Mounting Clips and aircraft cable are included in the appropriate quantities
• Operating Temperature: -40° F to 140° F (-40° C to 60° C)
• 24VDC Class 2
• IK10 and 3G rated
• IP67 rated. IP68 rating available upon specific request
• 5 year warranty indoor, 3 year warranty outdoor

Technical Information

**RING OUTER DIAMETER* (inch)| Plexineon RGB| Plexineon RGBW| Plexineon Pixel RGBW
---|---|---|---
EFFICACY**| 17.5 lm/W| 17.1 lm/W| 14.7 lm/W

Ø36 (Ø3ft)

| Lumen Output| 679 lm| 792 lm| 792 lm
Power Consumption| 38.6 W| 46.2 W| 53.7 W

Ø72 (Ø6ft)

| Lumen Output| 1357 lm| 1583 lm| 1583 lm
Power Consumption| 77.2 W| 92.3 W| 107.4 W

Ø144 (Ø12ft)

| Lumen Output| 2714 lm| 3166 lm| 3166 lm
Power Consumption| 154.6 W| 184.7 W| 214.9 W

Ø288 (Ø24)

| Lumen Output| 5429 lm| 6333 lm| 6333 lm
Power Consumption| 309.1 W| 369.5 W| 429.8 W

All channels full on.
*Rings will be made of equal sections no longer than 96” arc length. Rings exceeding 96W will have allowances for additional power feeds.

RGBW (3000K)

RGBW (3000K)

Model| TM- 30
__**CRI | Rf | Rg | R9
RGBW| 85| 84| 98| 22
RGBW – PXSPI**| 85| 84| 98| 22

Dominant Wavelength

Color : RGB

• Red 622nm
• Green 525nm
• Blue 468nm

Ordering Code

1. Rings will be made of equal sections no longer than 96” arc length. Tolerance on size of diameter is +/- 1”.
2. 2 mounting clips included for every 12” of diameter, with a minimum of 3 clips.
3. Decorative Clips match the fixture finish.

Finish Options

BK
Matte Black Finish

WH
Matte White Finish

GY
Matte Grey Finish

GG
Gloss Grey Finish

Suspension Hardware

• Suspension Hardware are included with Plexineon runs in the appropriate quantity, every 30” of linear/arc length for Standard Clips and every 18” of linear/arc length for Decorative Clips.
• Standard Clips have a stainless steel finish, Decorative Clip finishes match the fixture finishes.

SP/SPD

SC-1MP2-SCL
Suspension Kit with Single Clip, Ø2.0” canopy, 150” A/C Cable

Used approximately every 30” of linear/arc length for Standard Clips and every 18” of linear/arc length for Decorative Clips

SC-1MP2-DCL
Suspension Kit with Joiner Clip, Ø2.0” canopy, 150” A/C Cable

Use to join two fixtures together in the middle of a Suspended Run

SC-1FC5-SCL
Powerfeed Canopy Suspension Kit with Single Clip, Ø5.0” canopy, 150” A/C Cable

Used at the start of every Suspended Run

SC-1FC5-DCL
Powerfeed Canopy Suspension Kit with Joiner Clip, Ø5.0” canopy, 150” A/C Cable

Used to join two fixtures together and to drop power in the middle of a Suspended Run

Ring Types

Additional Material

• Ordered separately.

CC-2MF-190-SCL
Powerfeed Canopy Suspension Kit with Cross Cable and 2 Single Clips Ø5.0” canopy 150” A/C Cable

CC-2MF-150-SCL
Powerfeed Canopy Suspension Kit with 2 Cables and Single Clips Ø5.0” canopy 150” A/C Cable

SC-2FC5-DCL
Dual Powerfeed Canopy Standard or Decorative Joiner Clips 150” A/C Cable

• Connectors are included in the Plexineon runs per CCT option selected. Some CCT options may include multiple connectors per electrical junction. Order extras as desired.

60-H-0002-08
Female Quick Connect with flying leads, 2-conductor

Female Quick Connect with flying leads can be connected to the Power Supply at the start of a run. Can also be used with the Male Quick Connect to make wire jumpers
Use color suffix –08 for Black, -09 for Grey, or –10 for White

60-H-0001-08
Male Quick Connect with flying leads, 2-conductor

Male Quick Connect with flying leads can be used to make wire jumpers
Use color suffix –08 for Black, -09 for Grey, or –10 for White

60-H-C3-0002-01
Female Quick Connect with flying leads, 3-conductor

Female Quick Connect with flying leads can be connected to the Power Supply at the start of a run. Can also be used with the Male Quick Connect to make wire jumpers
Only avaliable in color black

60-H-C3-0001-01
Male Quick Connect with flying leads, 3-conductor

Male Quick Connect with flying leads can be used to make wire jumpers
Only available in color black

60-12-22AWGSBWN
Weatherproof Wire Nut Silicone Filled

Sample Layout

PX-48-HR-RGBW-PXSPI-SO-F-SP-GG-B-PFC
Plexineon Horizontal Ring, Suspended Mounting Clips

Power Supplies

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page. Note: All Power Supplies come with one quantity of HS- STW01-50-00 (50ft of 14 Gauge wire black jacket, 2 conducters)

Universal Power Supply 1% 120VAC – 277VAC

| 96W| 3X96W| 30W| 60W| 96W| 3X96W
---|---|---|---|---|---|---
Length| 8.66″| 11.85″| 6.10″| 7.93″| 8.25″| 9.57″
Width| 3.73″| 4.32″| 3.35″| 3.35″| 4.10″| 5.94″
Depth| 1.61″| 1.81″| 1.33| 1.32″| 1.56″| 1.13″

0-10V dims down to 1%, MLV/ELV/TRIAC dims down to 1%.
For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

0-10V Dimming Power Supplies 0.1% 120VAC – 277VAC

MODELS : 96W : 3X96

• Length 14.40″ 15.75″
• Width 5.20″ 6.62″
• Depth 2.60″ 4.95

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page. Note: All Power Supplies come with one quantity of HS- STW01-50-00 (50ft of 14 Gauge wire black jacket, 2 conducters)

DMX Dimming Power Supplies 120VAC – 277VAC

Features eldo LED’s LINEAR drive configurable dimmable drivers

DALI 0% Dimming Power Supplies 120VAC – 277VAC

Features eldo LED’s LINEAR drive configurable dimmable drivers

Non-Dimming Power Supply 120VAC – 277VAC

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page. Note: All Power Supplies come with one quantity of HS- STW01-50-00 (50ft of 14 Gauge wire black jacket, 2 conducters)

Luminii is a Lutron OEM Advantage Partner Lutron Power Supplies 1%

Luminii is a Lutron OEM Advantage Partner Lutron Power Supplies 0.1%

In-Ground Power Supplies

DMX Decoder

DMX signal to RGBW decoder (required to operate DMX controller) (for RGB and RGBW only)

Translates controller DMX512 programs for RGB and white LED strips.
Unique DMX address for the decoder can be set easily and displayed by the numeric display on the case. Changing and resetting the DMX address requires manual input.
Use power repeater to expand output.

• Operating Voltage 12-36 VDC
• Power Capacity up to 96W at 24V
• Operating Temperature Range from -4˚F to +122˚F in case

ORDERING CODE
MODEL
DDMX-RGBW
DDMX-RGBW – DMX decoder

DMX-1Z-RGBW, DMX-3Z-RGBW
RGBW LED 1 or 3 Zone Controller (for RGB and RGBW only)

DMX /Wireless RGB-W wall-mount controller controls DMX lighting fixtures, wireless control of RGB-W lighting fixture or use both simultaneously. Fits in any standard US switch box. Includes all the outputs in the back of the controller.
Control brightness levels with a single touch, personalize and memorize 3 different scenes, and even create 3 variations of white.

Features

• 2 in 1 in-Wall Controller: DMX Control or Wireless RGB-W
• 65,000 Color Options, Dimming and Speed Control
• Memory Function
• 50 Foot Wireless Range
• Easily Fits Standard US Switch Boxes
• Touch Sensitive Glass Surface
• Includes 10 Built in Programs, or Create and Play Your Own
• Operating Voltage 12 – 24V DC

Color Parameters

• Brightness
• Saturation
• Primary colors
• Fading
• Color changing speed

Touch DMX Controller

Touchscreen digital LED controller

Programmable advanced DMX512 lighting controller featuring a touch-screen interface. Operates as stand alone controller or integrated with most architectural lighting control systems. Can controller endless DMX512 enabled devices.
Mounts to standard single or dual gang wall box with the included power supply inside the junction box. Terminal block design for power and data connections.

Features

• Sleek glass design which sits 0.43” from the wall

• Graphical color display to show selected environment

• Color/dimmer/speed palette

• Color temperature mixing

• Touch sensitive buttons. No mechanical parts

• Touch sensitive wheel allows for accurate color selection

• Multi-zone microSD memory

• Multi-room control with 500 scenes, 10 zones

• 1024 DMX channels. Control 340 RGB fixtures

• USB & Ethernet connectivity for programming and control

• Power Supply
  7 VDC (included)

• Programmability
  PC, Mac, Tablet, Smartphone

• Output Signal
  DMX512 (1024 channels)

Color Parameters

• Brightness
• Saturation
• Speed of color changing sequence
• Fading / dimming / brightness

Smart Pixel Decoder
SPI signal to DMX signal decoder

The SR-DMX-SPI is a smart LED pixel decoder that controls RGB/RGBW pixel LED strips with SPI signal. Designed with a digital display, the pixel controller allows for easy configuration of most settings. Three push buttons are available for control of the LED functions.

• Operating voltage 5-24 VDC, Max 12A

• Power capacity up to 96W at 24V
  Operating temperature range from -4˚F to +122˚F in case

• Features

  • SPI signal output for RGB/RGBW pixel light control
  • DMX512 controllable 52 DMX decoding channels Works with integrated DMX consoles and sequencing software
  • Display panel allows for easy configuration

www.luminii.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>