SEGWAY C2 Pro Kick Scooter User Manual
- June 12, 2024
- Segway
Table of Contents
SEGWAY C2 Pro Kick Scooter
Product Information
The product is the Ninebot eKickScooter. It is an electric scooter manufactured by Segway-Ninebot. The manufacturer reserves the right to make changes to the product, release firmware updates, and update the user manual at any time. For the latest user materials, including firmware updates and safety instructions, visit www.segway.com or check the Segway-Ninebot app.
The pictures shown are for illustration purposes only. The actual product may vary.
Diagram
C2
C2 Pro
Product Usage Instructions
Powering On and Off
To power on the scooter, press the power button. To power it off, press and hold the power button for 2 seconds.
Switching Speed Modes
When the scooter is on, press the power button twice to switch between speed modes.
There are three modes available:
- Mode D (Standard mode): Top speed of 12 km/h (7.5 mph)
- Mode S (Sport mode): Top speed of 16 km/h (9.9 mph)
- Mode E (Power-assisting mode): Top speed of 16 km/h (9.9 mph)
Ambient Light
To turn on or off the ambient light, press the power button three times.
Dashboard
The dashboard displays the current speed of the scooter and error codes.
Dashboard & Power Button
Power Button : Press the button to power on the scooter; press and hold
the button for 2 seconds to power it off. When the scooter is on, press twice
to switch between the speed modes. Press three times to turn on/off the
ambient light.
Speedometer: It displays the current speed of the scooter, as well as
error codes.
Speed Mode: There are three modes available. The top speed is as
follows :
Error Notification: It indicates that the scooter has detected an error.
Bluetooth: It indicates that the scooter has been successfully connected
to the mobile device.
Temperature Warning: It indicates that the battery temperature has
reached 55°C (131°F) or is below 0°C (32°F).
- At this point, the vehicle cannot accelerate normally and may not be charged. Do not use until the temperature has reverted to the normal range.
Locking Reminder: When the icon lights up, it means the scooter is
locked. If abnormal movements are detected, the scooter will start beeping and
the tail light will falsh.
Battery power: The total battery power equals 5 bars.
- The battery power is very low when the first battery bar is red. Please charge your scooter immediately.
Locking Reminder
If the locking reminder icon lights up, it means the scooter is locked. If abnormal movements are detected, the scooter will start beeping and the tail light will flash.
Battery Power
The total battery power is indicated by 5 bars. When the first battery bar turns red, it means the battery power is very low and the scooter needs to be charged immediately.
Specifications
| Parameter | Ninebot eKickScooter C2 | Ninebot eKickScooter C2 Pro |
|---|---|---|
| Approx. Weight | 10.4 kg (22.9 lbs) | 10.7 kg (23.6 lbs) |
| Max. Rider Weight | 50 kg (110 lbs) | 50 kg (110 lbs) |
| Required Height | 6+ | 6+ |
| Max. Speed | Approx. 16 km/h (9.9 mph) | Approx. 17 km/h (10.6 miles) |
| Theoretical Range [1] | Approx. 11 km (6.8 miles) | Approx. 1.5 h |
| Riding Time[2] | Approx. 56 mins | N/A |
| Max. Slope | Approx. 5% | N/A |
| Machine Traversable Terrain | N/A | N/A |
| Operating Temperature | N/A | N/A |
| Storage Temperature | N/A | N/A |
| IP Rating | N/A | N/A |
- Theoretical Range: tested while riding with a full battery, 110 lbs (50 kg) load, 77°F (25°C), 70% of max. speed on average on pavement. * Some of the factors that affect range include speed, load, number of starts and stops, ambient temperature, etc.
- Riding time under the testing conditions of theoretical range.
Certifications
This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland. The battery complies with UN/DOT 38.3. The battery complies with ANSI/CAN/UL-2271.
European Union Compliance Statement
Information on Disposal for Users of Waste Electrical & Electronic Equipment
This symbol on the product or on its packaging indicates that used electrical
and electronic products should not be mixed with unsorted municipal waste. For
proper treatment, it is your responsibility to dispose of your waste equipment
by arranging to return it to designated collection points.
Disposing of this product correctly will help save valuable resources and
prevent any potential negative effects on human health and the environment,
which could otherwise arise from inappropriate waste handling. Penalties may
be applicable for incorrect disposal of this waste, in accordance with your
national legislation. Please contact your local authority for further details
of your nearest designated collection point.
Battery recycling information for Users
This symbol means that batteries and accumulators, at their end-of-life,
should not be mixed with unsorted municipal waste.Your participation is an
important part of the effort to minimize the impact of batteries and
accumulators on the environment and on human health. For proper recycling you
can return this product or the batteries or accumulators it contains to your
supplier or to a designated collection point. Disposing of this product
correctly will help save valuable resources and prevent any potential negative
effects on human health and the environment, which could otherwise arise from
inappropriate waste handling. Penalties may be applicable for incorrect
disposal of this waste, in accordance with your national legislation. there
are separate collection systems for used batteries and accumulators.
Please, dispose of batteries and accumulators correctly at your local
community waste collection/recycling center.
Electromagnetic Compatibility Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of the Electromagnetic Compatibility Directive 2014/30/EU.
Restriction of the use of certain hazardous substances (RoHS) Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including
parts (cables, cords, and so on) meets the requirements of RoHS Directive
2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863 on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment (“RoHS recast” or “RoHS 2.0”).
The Safety of Toy Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of The Safety of Toy Directive 2009/48/EC.
Radio Equipment Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of the Radio Equipment Directive 2014/53/EU.
EU Authorised Representative:
Segway-Ninebot Europe
Dynamostraat 7, 1014 BN Amsterdam, The Netherlands.
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model:
051403E, 051404E comply with the essential requirements and other relevant
provisions of the Electromagnetic Compatibility 2014/30/EU, The Radio
Equipment Directive 2014/53/EU，The Safety of Toy Directive 2009/48/EC and the
RoHS Directive 2011/65/EU and amendment Commission Delegated Directive (EU)
2015/863. Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the
product model: 051403E Comply with the essential requirements and other
relevant provisions of the Electromagnetic Compatibility 2014/30/EU, The
Safety of Toy Directive 2009/48/EC and the RoHS Directive 2011/65/EU and
amendment Commission Delegated Directive (EU) 2015/863.
The declaration of conformity can be viewed at the following address:
https://eu-en.segway.com/instruction-manuals
UK Compliance Statement
Electromagnetic Compatibility Regulations 2016
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of Electromagnetic Compatibility Regulations 2016.
The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012
Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including
parts (cables, cords, and so on) meets the requirements of The Restriction of
the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012.
Toys (Safety) Regulations 2011
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of Toys (Safety) Regulations 2011.
Radio Equipment Regulations 2017
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of Radio Equipment Regulations 2017.
UK Authorised Representative
UKCA Experts Ltd.
Dept 302,
43 Owston Road Carcroft,
Doncaster, DN6 8DA,
United Kingdom
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model: 051403E, 051404E comply with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016, Radio Equipment Regulations 2017，Toys (Safety) Regulations 2011 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model : 051403E comply with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016, Toys (Safety) Regulations 2011 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
The declaration of conformity can be viewed at the following address: https://eu-en.segway.com/instruction-manuals
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>