CREATE MESA-ALTAVOZ Bluetooth Speaker Table and Wireless Smartphone User Manual
- June 12, 2024
- CREATE
Table of Contents
- CREATE MESA-ALTAVOZ Bluetooth Speaker Table and Wireless Smartphone
- Product Information
- Product Usage Instructions
- SECURITY INSTRUCTIONS
- FUNCTIONS
- PARTS LIST
- CONTROL PANEL
- ASSEMBLY STEPS
- POWER ON/OFF
- BLUETOOTH CONNECTION AND PLAY
- VOLUME CONTROL
- CHARGING
- TWS FUNCTION
- AUTOMATIC POWER OFF
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CREATE MESA-ALTAVOZ Bluetooth Speaker Table and Wireless Smartphone
Product Information
The Speaker Table is a multifunctional table that also functions as a speaker. It features Bluetooth connectivity, USB reader,wireless charging, and TWS (True Wireless Stereo) function. The table speaker can be used to play music, make phone calls, and charge devices.
Product Usage Instructions
Before using the Speaker Table, please read and follow the security instructions provided below:
- Make sure to place the table speaker on a stable surface to prevent it from falling.
- Keep the table speaker away from water and other liquids to avoid damage.
- Do not expose the table speaker to extreme temperatures or direct sunlight.
- Avoid using the table speaker in dusty or humid environments.
- Do not open or disassemble the table speaker. There are no user-serviceable parts inside.
- Keep the table speaker out of reach of children and pets.
- To clean the table speaker, use a soft, dry cloth. Do not use any abrasive or chemical cleaners.
Now that you are familiar with the security instructions, you can proceed to use the Speaker Table. Follow the instructions below for proper usage:
- Power On/Off: Press the power button to turn on/off the table speaker.
- Mode Switch: Use the mode switch to switch between different modes, such as Bluetooth, USB, or AUX.
- Aux Auto Switch: Turn on the AUX mode by pressing the AUX auto switch.
- USB Reader: Insert a USB device into the USB port to play music from it.
- Bluetooth Connection and Play: Enable Bluetooth on your device and search for the table speaker. Once connected, you can play music wirelessly.
- Making Phone Calls via Bluetooth: When connected to a Bluetooth-enabled device, you can make phone calls using the table speaker.
- Volume Control: Adjust the volume using the volume control buttons.
- USB Charging: Connect your device to the table speaker’s USB port for charging.
- Wireless Charging: If your device supports wireless charging, place it on the designated area of the table to charge wirelessly.
- Low Battery and Charging: When the table speaker’s battery is low, connect it to a power source using the provided charger.
- TWS Function: If you have two compatible table speakers, you can pair them together using the TWS function for stereo sound.
- Automatic Power Off: The table speaker will automatically power off after a period of inactivity to save battery.
Follow these instructions to ensure the best use and enjoyment of your Speaker Table.
Thank you for choosing our table speaker. Before using the appliance, and to
ensure the best use, carefully read these instructions.
The safety precautions enclosed herein reduce the risk of death, injury and
electrical shock when correctly adhered to. Keep the manual in a safe place
for future reference, along with the completed warranty card, purchase receipt
and package. If applicable, pass these in-structions on to the next owner of
the appliance. Always follow basic safety precautions and accident-prevention
measures when using an electrical appliance. We assume no liability for
customer failing to comply with these requirements.
SECURITY INSTRUCTIONS
When using any electrical appliance, basic safety precautions should always be observed.
- The maximum bear weight of this product is 5 kg, do not place any item weighing more than 5 kg on this product.
- This product can’t be used as a seat.
- Please use the original AC adapter for charging, if not, it may cause the speaker to be charged slowly or cannot be charged at all.
FUNCTIONS
Bluetooth, hands free, aux in, USB charger function, USB reader function, wireless charger function and TWS (True Wireless Stereo).
PARTS LIST
- Wireless charging dock
- Main body
- Power cable
- Legs (x3)
- AC power adapter
- 3.5 mm auxiliar cable
- EVA pads (x3)
CONTROL PANEL
- Mic
- LED
- Power button ON / OFF / TWS
- Play / Pause / Phone
- Volume –
- Volume +
- USB charger port
- USB reader port
- Charging LED lights
- Power in
- Aux
- Reset
ASSEMBLY STEPS
- Open the box, place the speaker on a flat surface with base upwards (showing the screw holes).
- Take one wood leg and insert it into a screw hole.
- Rotate the wooden leg clockwise until tightly fastened.
- Repeat Steps 2 and 3 for the remaining 2 wooden legs.
- Turn the speaker right side up after the wooden legs are assembled.
VOICE REMINDING MESSAGES
- Power on: Connect the power supply (voice prompt when the speaker turns on).
- Bluetooth: Bluetooth mode
- Power off: Shut off the power supply (voice prompt when the speaker turns off).
- Bluetooth, waiting for connection: Pairing (enter Bluetooth mode / AUX, and back to Blue-tooth mode).
- Bluetooth is connected: Pairing successfully, back to Bluetooth Mode successfully again.
- Bluetooth disconnected, waiting for connection: Switch off the connection with the paired mobile phone or other device, long press the Play/Pause/Phone button to disconnect the Bluetooth.
- Maximum volume: Maximum volume level
- Low Battery: The built-in battery needs to be charged.
POWER ON/OFF
- Long press POWER/TWS button, you will hear “Power On” from the speaker and the speaker will enter Bluetooth mode as default. Then, you will hear “Bluetooth, waiting for connection”. Now, a smart phone and other devices can be paired with the speaker.
- Long press POWER/TWS button, the speaker will be turned off. You will hear “Power Off” from the speaker.
MODE SWITCH
- Short press the [POWER] button to switch the channel, the channel sequence will be Bluetooth-USB-AUX and then circulation.
- The speaker support the Bluetooth mode by default, but if insert the USB Reader or AUX cable, then will change to the mode accordingly.
AUX AUTO SWITCH
Insert the AUX cable into the AUX socket at the rear panel of the speaker, the speaker will switch to AUX mode automatically. The blue and green LED light will be on and the Bluetooth mode will be switched off directly. After taking out the AUX cable, the Blue-tooth mode will be switched on automatically. Then, you will hear “Bluetooth, waiting for connection” or “Bluetooth”.
USB READER
- Insert the USB reader into the USB reader port at the rear panel of the speaker, then the speaker will reader and play the song automatically, the cyan LED light will be on.
BLUETOOTH CONNECTION AND PLAY
- When the speaker is in Bluetooth mode, it will automatically switch to “pairing status”. The blue LED light will flash slowly and the Bluetooth device name will appear on your smartphone’s Bluetooth settings as “SPEAKER TABLE”.
- The speaker will pair with your smartphone via Bluetooth, you will hear “Bluetooth is con-nected” after pairing. The blue LED light will be always on. lf it fails, the blue LED light will flash slowly.
- When playing music after connecting with your smartphone via Bluetooth, the speaker will pause if you shortly press the Play/Pause/phone button, it will resume playing after shortly pressing the Play/Pause/phone button again.
- When this speaker is connected with your smartphone, long press the Play/Pause/phone button, the speaker will switch off the connection with the paired mobile phone and an-other smartphone can connect with “SPEAKER TABLE” via Bluetooth.
- The best distance between a smartphone and the speaker is more or less 10 m.
MAKING PHONE CALLS VIA BLUETOOTH
- When a call comes in, shortly press the Play/Pause/phone button to answer the phone, speak to the MIC, it will be a clear call. Short press again to hang up, and long press to declined.
- Double press the Play/Pause/phone button for dialing the phone number of the last call in record.
- The speaker will switch into Bluetooth mode and respond the coming call if there is a call when playing USB reader or AUX music. If you do not need to use the speaker to an-swer the phone, disconnect the Bluetooth connection between the mobile phone and the speaker, or switch the mobile phone to the speaker / handset status.
VOLUME CONTROL
- Press + button to increase the volume.
- Press – button to decrease the volume.
- Both short press and long press the volume button +/- can adjust the volume level under the Bluetooth and AUX mode. Short press the volume button +/ – can adjust to previous or next song. Long press the volume button +/- can adjust the volume level under the USB reader mode.
CHARGING
USB CHARGING
- When the speaker is powered on, or connected with AC adapter, the USB port can charge the smart devices at the same time. When the speaker is powered off, the USB port cannot charge any external devices.
- If the speaker is connected via the AC adapter, even the speaker is powered off, the USB port can charge the smart devices at the same time.
WIRELESS CHARGING
- The charging coil of the wireless charging devices (The mobile phone which can support Qi standard of wireless charging) needs to aim at the wireless charging mark which is in the middle of the table speaker, when the speaker is powered on or connected with the AC adapter. You will see the charging mark on the screen of your mobile phone or you will hear a sound after connecting with the device for wireless charging.
LOW BATTERY AND CHARGING
- When the battery capacity is low, you will hear “Low Battery” to remind the user that the speaker needs to be charged. lf the user does not connect the speaker to charge it, the speaker will be automatically powered off.
- After connecting the AC adapter to the port on the back of the speaker, the red LED light will be on while charging. The red LED light will turn off when the speaker is fully charged.
- It can display the battery power of the speaker on the phone after connecting Bluetooth (The mobile phone which can support it).
- Caution: The LED light turns red for one second after connecting the AC adapter. Then, the LED light will turn off. It means the built-in battery is fully charged
TWS FUNCTION
TWS feature allows you to link two speakers together. The first table will be the master connected to the Bluetooth device and operate all controls. The second table is a linked speaker giving True Wireless Sound.
- Turn on both table speakers, double click the POWER/TWS button on one of the two table speakers, both speakers will enter team paring mode, you will hear an acoustic signal, both blue LED indicators of both table speakers will flash rapidly at the same time. After the team paring, the LED indicator of the first speaker (Master) will remain flashing slowly. The LED light of the second speaker (Sub-speaker and linked TWS) will be green. After connecting with a phone or other Bluetooth device, the Master speaker LED will be fixed blue, the LED light of the sub-speaker will be fixed green.
- When speakers are team paired successfully, short press POWER/TWS button of the Master speaker or the sub-speaker to switch off the team pairing TWS mode.
- When speakers are team paired TWS mode successfully under Bluetooth, the two speak-ers can still work as paired speakers by inserting the AUX cable into the AUX socket on the first speaker (Master). The Master speaker will be with green and blue LED light, the sub-speaker with Green LED light only. TWS mode will fail if Aux cable is inserted to the Aux socket on the second speaker (sub-speaker).
- Under TWS status, only the master speaker will be used to pick up the phone. The sec-ond speaker is without response.
AUTOMATIC POWER OFF
- After powering on the apearker without Bluetooth connection, or without line in signal, or disconnecting the Bluetooth after 10 minutes, the speaker will power off automatically. You will hear “Power off”.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible nega-tive effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.