CRYSTORAMA ABB-3003-BK_CEILING Abbott Three Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ABB-3003-BK_CEILING Abbott Three Light Ceiling Mount
Product Information
Product Name: CRYSTffiRAMA Lighting
Model Number: ABB-3003-BK_CEILING
Website: www.crystorama.com
Product Type: Ceiling Light
Product Usage Instructions
- Ensure you have received all the necessary components listed in the assembly instruction manual.
- Choose an appropriate location on your ceiling for hanging the CRYSTffiRAMA Lighting.
- Prepare the installation area by turning off the power supply at the circuit breaker.
- Remove any existing light fixtures from the installation area, if applicable.
- Follow the step-by-step instructions provided in the assembly instruction manual to assemble the CRYSTffiRAMA Lighting.
- Once assembled, carefully lift the CRYSTffiRAMA Lighting and align it with the mounting bracket on the ceiling.
- Securely attach the CRYSTffiRAMA Lighting to the mounting bracket using the provided screws or hardware.
- Double-check that all connections are secure and properly aligned.
- Turn on the power supply at the circuit breaker to test the functionality of the CRYSTffiRAMA Lighting.
- If everything is working correctly, adjust the position and angle of the lighting as desired.
- Enjoy the illumination provided by your new CRYSTffiRAMA Lighting for years to come!
ASSEMBLY INSTRUCTION MODEL #ABB-3003-BK_CEILING
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 3-Candelabra
40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
THIS FIXTURE IS DRY RATED
How to install for hanging:
Please place the fixture frame on a soft cloth covered table before the
installation.
- Determine the desired hanging height and choose the correct length of rod.
- Feed the fixture wires through the rods and canopy . Afterwards, connect the rods together then screw the swivel onto the top of the upper-most rod.
- The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2.
- Place the Candle Sleeve over the Socket, then Install the Bulb to the Socket.
How to install for ceiling:
Please place the fixture frame on a soft cloth covered table before the
installation.
- Remove the swivel from the canopy.
- Put the canopy over the top of the frame and secure with hex nut.
- The canopy of the fixture can now be mounted to the ceiling by following instruction Drawing 2.
- Choose either the white or gold candle sleeves and place it over the socket.
Install the Bulb into the socket.
WARNING: This product can expose you to Lead which is known to the state
of California to cause cancer and/or birth defects or reproductive harm. For
more information go to www.P65Warnings.ca.gov
Part Numbers
- A. (1)-Mounting hardware
- B. (1)-Canopy WS”x H0.75″ (XFW3003BKCANSIN)
- C. (3)-Canopy Screw W0.16″x H0.48″
- D. (3)-Long Rod W1/2″x H12″ (XFW3003BKROD12IN)
- E. (!)-Short Rod W1/2″x H6″ (XFW3003BKROD6IN)
- F. (1)-Lamp Body
- G. (3)-Bulb (Not included)
- H. (3)-Metal Candle sleeve Wl”x H2″ (XFW3003BKCDL2IN) (3)-Metal Candle sleeve Wl”x H2″ (XFW3003VGCDL2IN)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>