niceboy RAZE 3 GURU Portable Bluetooth Speaker User Manual

RAZE 3 GURU Portable Bluetooth Speaker
**User Manual

RAZE 3 GURU
User Manual / Bluetooth Speaker**

PACKAGE CONTENTS

Bluetooth speaker Niceboy RAZE 3 guru
USB-C charging cable
Audio cable
Instructions for Use

PRODUCT DESCRIPTION

1. Magic Button
2. On / Off, mode change
3. LED indicator
4. Increase volume / Next song
5. Play / Pause Answer / End / reject call / last dialed number
6. Decrease volume / Previous song
7. . Reset – factory settings
8. AUX input jack 3.5mm
9. Rechargeable USB – output, input for USB flash drive
10. Rechargeable USB-C input

CHARGING

We recommend fully charging the speaker before its first use to maximize the battery’s lifespan. The speaker takes approximately 3 hours to fully charge. Low battery is announced by an audible signal. To charge the speaker’s battery connect the enclosed USB-C cable to the charging port (10) and connect to any charging adapter (voltage 5V and output current minimum of 1A) or to a USB port on your PC. The charging process is signalized by the charging LED diode (3), the diode will stop shining once the speaker has finished charging.

POWERING ON/OFF

Press and hold button (2) for 3 seconds to power on/off the speaker.

CONNECTING TO BLUETOOTH

1. Press the power on/off button (2) for 3 seconds to power on the speaker. The speaker is now in pairing mode ready for Bluetooth connection. Pairing mode is signalized by an LED diode flashing blue (3).
2. Activate Bluetooth on your own device. Select “Niceboy RAZE 3 guru” from the list of available devices.
3. Your device will connect to the speaker. Successful pairing is announced by an audio signal and the flashing of the LED diode (3).

PLAYBACK

Play or pause tracks by pressing button (5). Press and hold the volume controls, located on buttons (4) and (6) to change volume. Press the volume up button to jump to the next track and the volume down button to jump to the previously played track.
AUX MODE

1. Insert the enclosed 3.5 mm jack cable into the audio port (8) and the speaker will automatically switch to the relevant mode.
2. Use the device with which you are connected to the speaker to control music playback.Press and hold the volume controls, located on buttons (4) and (6) to change the volume.

USB FLASH DRIVE
After inserting a USB flash drive, press button (2) and the USB mode will be announced by an audio signal.
For both the SD card and USB flash drive, play or pause tracks by pressing button (5). Press and hold the volume controls, located on buttons (4) and (6) to change the volume. Press the volume up button to jump to the next track and the volume down button to jump to the previously played track. The device supports a maximum data capacity of 32GB and the following audio formats: MP3, WMA, WAV, APE, FLAC.

TELEPHONE CALLS

Press button (5) to accept and then end telephone calls. Press and hold the same button to decline a telephone call. Press the same button twice to call the last number in your call list.

MAGIC BUTTON

Press button (1) to switch between the two audio modes. The reinforced bass mode has been activated when the button is backlit.
Note: You will need to keep in mind that the Magic Button mode uses up more of the battery life.

FACTORY SETTINGS

Should you encounter technical difficulties, return the speaker to its factory settings. The speaker must be powered on. Insert any thin object (needle, pin) into the reset opening (7). The speaker will automatically power off. Manually power the speaker back on to complete the reset process.

PARAMETERS

The manual may be installed in its electronic form at www.niceboy.eu under the support section. RTB Media s.r.o. hereby declares that the type of radio equipment Niceboy RAZE 3 Guru complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/cs/podpora/prohlaseni-o-shode- mM38CtmYvX693lHvvu4CWpk3vJGrvnC
USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)
This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing electrical and electronic devices.
(Business and corporate use) In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

Importer to EU: RTB media s.r.o., 5. Kvetna 1746/22
Praha 4, 140 00 Czech Republic, ID: 294 16 876
Made in China.

References

• Niceboy - IT'S YOUR DAY!
• Niceboy - IT'S YOUR DAY!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>