harmonizedhome ICH2029B05 Chandelier Need Help Instruction Manual

harmonizedhome ICH2029B05 Chandelier Need Help

Product Information

Specifications

• Model : ICH2029B05
• Date : 10/22

Tools and Materials Required

• Phillips Screwdriver
• Wire Cutters
• Wiring supplies as required by local electrical code
• Pliers
• Wrench

Safety Precautions

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE  ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

Product Usage Instructions

Installation

1. Install the length of rod that is required by threading wire through the rod and screwing it to the fixture. Install swivel to the rod, ensuring that the plastic bushing sleeve is at the swivel.
2. Loosen B. Adjust stud to desired length and lock in place with B.
3. Mount the mounting bracket to electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screwing the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
7. Remove spinner nut from socket. Position the glass on lamp and secure with spinner nut. (Please check the glass before installing for any cracks. Do not overtighten the spinner nut to attach the glass to the fixture.)
8. Install specified bulb type and wattage (not included).

FAQ

• Q: What tools do I need for installation?
  A: You will need a Phillips screwdriver, wire cutters, wiring supplies as required by local electrical code, pliers, and a wrench.

• Q: How should I clean the fixture?
  A: To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.

• Q: How do I ensure a proper electrical connection?
  A: Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.

CHANDELIER

TOOLS AND MATERIALS REQUIRED
Wiring supplies as required by local electrical code

SAFETY PRECAUTIONS

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
3. BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
4.  CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE
5. ELECTRICAL BOX.
6. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH.

NOTE : Product may not look exactly as shown in figures.

INSTALLATION

1. Install the length of rod that is required by threading wire through the rod and screwing it to the fixture. Install swivel to the rod, ensuring that the plastic bushing sleeve is at the swivel.
2. Loosen “B”. Adjust stud to desired length and lock in place with “B”
3. Mount the mounting bracket to electrical box using electrical box screws (not included). Make sure the studs on the mounting bracket are facing out from the electrical box.
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground screw in the electrical box. Connect the black wire (or wire with marking) from the fixture to the black wire in the electrical box and connect the white wire from the fixture to the white wire in the electrical box.
5. Once connections of wires are completed, carefully tuck wires and wire nuts into the electrical box making sure no bare wire (on the black and white) is visible at the wire nuts.
6. Position fixture over studs on mounting bracket assembly. Secure fixture in place with star washers and cap nuts.
7. Remove spinner nut from socket. Position the glass on lamp and secure with spinner nut. (Please check the glass before installing for any cracks. Do not overtighten the spinner nut to attach the glass to the ˜ fixture.)
8. Install specified bulb type and wattage (not included).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>