TOPEAK Twoup Tuneup Bike Stand User Guide

Bike Stand User’s Guide Max Height 214cm(7ft – 1.5 in)

PARTS LIST

1. | Hook Unit Adaptor (038.1 mm)
   1-1 Hook Unit Mounting Device
   1-2 Adjusting Knob|

1

---|---|---

| Extension Tube|

1

| QR Clamp Lever|

1

| Hook Unit Adaptor (044. o mm)
4-1 Hook Unit Mounting Device
4-2 Adjusting Knob|

1

| Extension Arm SeT

5-1 Extension Arm|

1

5-2 M6 x to mm x 2oL Bolt|

2

| Main Tube|

1

| Supporting Legs|

| Hook Unit
8-1 Hook|

4

8-2 Hook Locking Nut|

4

8-3 Balance Adjusting Unit|

2

8-48 M6 x 1.o mm x 20L Bolt|

2

8-4b M6 x 1.o mm x 2oL Bolt|

2

8-5 M6 x to mm x 2oL Bolt|

4

| Handlebar Stabilizer|

1

INSTALLATION

ASSEMBLING SUPPORTING LEGS

NOTE
Allays fully expand supporting legs for a stable foundation.

NOTE
Mount Extension Arm to the main tube only Extension Arm should be aligned with one of the supporting legs.
ASSEMBLING HOOK UNIT TO HOOK UNIT ADAPTOR

ADJUSTING HOOK UNIT

ASSEMBLING HANDLEBAR STABILEBAR TO THE LOWER HOOK UNIT

SET UP

TwoUp TuneUp can be used as a maintenance or storage bike stand. Never spin the rear wheel at high revolutions or apply your rear brake to a fast-pinning wheel when your bike is installed on the TwoUp TuneUp bike stand. For added stability, it is recommended to use a handlebar stabilizer and hold the handlebar or Seatpost with one hand when rotating the pedals. Make sure the pedals do not interfere with the stand while spinning the wheel.
WARNING
The Extension Arm is designed for use only with the Topeak TwoUp TuneUp bike stand. Using the Extension Arm with any other Topeak stand products will void any warranty and cause unsafe conditions and potential bodily harm

Note:
Remove bike(s) from the upper position(s) prior to working on the bike in the lower “tune-up” position. The stand may become unstable while working with bikes loaded in upper positions. Never attempt to service a bicycle in the upper hook position.

WARNING
Always balance the bike on its hook and make sure the handlebar stabilizer is installed in the correct position (perpendicular to the handlebar). An incorrect position may cause damage to the handlebar stabilizer or your bike.
IMPORTANT

1. Always make sure the main tube and extension tube are securely locked in place. Improper fastening may cause the QR clamp lever and tension bolts to loosen resulting in the collapse of the stand.
   

2. Before placing bike(s) in the TwoUp TuneUp bike stand, make sure they stand QR clamp levers are tightened.

3. Always balance the bike on its hook and make sure the handlebar stabilizer is installed in the correct position (perpendicular to the handlebar). An incorrect position may cause damage to the handlebar stabilizer or your bike.

4. Always remove bike(s) before breaking down the TwoUp TuneUp bike stand.

5. The adjusting knob should not be overtightened. If unable to loosen the adjusting knob, loosen mounting bolts first, then loosen the adjusting knob.
   

6. The maximum height of the TwoUp TuneUp bike stand is 214 cm (7 ft -1.5 in).

7. The maximum weight capacity per Hook Unit is i8 kilograms (39.7 lbs) and the maximum weight capacity per stand is 72 kilograms (158.7 lbs).

8. The Extension Arm is designed for use only with the Topeak TwoUp TuneUp bike stand. Using the Extension Arm with any other Topeak stand products will void any warranty and cause unsafe conditions and potential bodily harm.

9. Always fully expand supporting legs for a stable foundation.

10. Position the extension arm parallel with one of the supporting legs for stability. Make sure the TwoUp TuneUp bike stand is balanced at all times to prevent personal injury and/or damage to bikes when hanging or removing bikes.
    

11. Two additional hook units can be mounted opposite to the extension arm and the existing upper hook unit. Additional hook units are sold separately.

SPARE PARTS

HOOK UNIT

Art no.
TW010-SP02(for upper)
TW010-SP03(for lower)

WARRANTY

2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this operating manual.
* The specifications and design are subject to change without notice.
Topeak products are available only from professional bicycle shops.
Please contact your nearest Topeak authorized bicycle dealer for any questions.
For customers in the USA, call: 1-80o-250-3068 Website: www.topeak.com

Copyright © Topeak, Inc.

Documents / Resources

| TOPEAK Twoup Tuneup Bike Stand [pdf] User Guide
Twoup Tuneup Bike Stand
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>