Vaporesso Xros 3 Mini Pod Kit User Manual
- June 1, 2024
- VAPORESSO
Table of Contents
USER MANUAL
LUXE XR MAX
Vaporesso Xros 3 Mini Pod Kit
Thank you for choosing VAPORESSO product.
Please read this instruction carefully before use to ensure a perfect
experience.
If there is any additional requirement about this product, please consult the
local agent or contact us through our website:
www.vaporesso.com
ENLARGED VIEW
SPECIFICATION
Dimensions: 106.5 x 32.1 x 26 mm
POD Capacity: 5ml/2ml(TPD)
Coil Resistance: GTX 0.2Ω MESH COIL, GTX 0.4Ω MESH COIL
Battery Capacity: 2800mAh
Output Power: 80W
Charging Current: DC 5V/2A,Type-C
Display : 0.54’’ OLED Screen, 2 * RBG LED Light
PACKING LIST
1 x VAPORESSO LUXE XR MAX Battery
1 x VAPORESSO LUXE XR POD (DTL)
1 x GTX 0.2Ω MESH COIL
1 x GTX 0.4Ω MESH COIL
1 x TYPE-C Cable
1 x User Manual & Warranty Card
1 x Reminder Card
USE INSTRUCTIONS
- Fill E-liquid
– Take out the used POD from the battery and pull out the silicone plug from the bottom of the POD;
– Fill e-liquid through the hole
– Put the silicone plug back in place firmly after filling is finished.
– Please wait 5 minutes for the e-liquid to soak into the coil completely.
-
Refer to the figure 1 above. 2. Replace the Coil
– Take out the POD from the battery;
– Pull out the used coil from the POD;
– Install a new coil to the POD;
– Reattach the POD into place. -
Refer to the figure 2 above. 3. Adjust the Airflow
There is an airflow control toggle on the side of the battery. Adjust the toggle according to your vaping habits for different airflow effects. -
Refer to the figure 3 above. 4. Power on/off the Device
Click the power button 5 times in 2 seconds to power on or off the device.-
Start Vaping
Press the power button to enjoy extraordinary vaping experience. -
Setting
-
-
Main interface
When the screen is activated, the screen will display the battery level, wattage and puff number from top to bottom when not vaping, the puff number will turn to vaping time during vaping. -
Adjust wattage
Click the power button 3 times in 2 seconds to unlock the touch adjustment button then you can adjust the wattage.
Click the power button 1 time to confirm the wattage you choose and back to the main interface. -
Recommended Power Adjustment LUXE XR MAX Kit is using the GTX coil platform, and the suggested power need to be noticed before start vaping. GTX MESH
COIL| GTX 0.2Ω
MESH| GTX 0.4Ω
MESH
---|---|---
Suggested Wattage| 45-60W| 26-32W -
Entering the menu
Click the power button 4 times in 2 seconds to enter the menu, press touch button “^” or “v” to switch between different functions settings, click the power button 1 time to confirm the function to set, then you can:
① turn on or off the led light
② turn on or off the smart mode
*Smart mode: When this function is turned on and a new POD is installed, the system will adjust to the best power, and confine the power in the recommended range.
③ clear the puff number
④ back to the main interface
-
Refer to the figure 4 above.
-
Battery Level**
LED| Battery Status**
---|---
Green-cyan| 60%-100%
Cyan-blue| 30%-60%
Blue-rose red| 0%-30% -
Charge the Battery
After connecting the Type-C cable to the battery, the battery indicator and remaining charging time will be showed on the screen. -
Safety Mode
If the vaping time over 10 seconds, the battery level LED light quick flash 5 times and the device will be powered off automatically, press power button 5 times constantly to power on again.
-
PROTECTIONS
| Protections | Situation | Indicator |
|---|---|---|
| Low Resistant Protection | The device detects an ultra-low resistance. | LED |
light quick Flash 5 times in Red-> Stop Output
Short Circuit Protection| The device detects a short| LED light quick Flash 5
times in Red -> Stop Output
No Load Protection| The device does not detect an atomizer.| LED light quick
Flash 5 times in Red-> Stop Output
High Resistance Protection| The device detect an ultra-high resistance.| LED
light quick Flash 5 times in Red -> Stop Output
Low Voltage Protection| The battery voltage drops too low.| LED light quick
Flash 3 times in Red -> Stop Output
High Temperature Protection| The PCBA temperature rise exceeds 75°C.| LED
light Flash 4 times in Red -> Stop Output
Vver Time Protection| The vaping time exceeds 10S.| LED light quick Flash
times in 5 Current Color -> Stop Output
CAUTIONS
-
Please turn off the device when it is not in use.
-
Do not leave the charging device unattended.
-
Do not drop, throw or abuse your device, which may cause damage.
-
Please use a standard USB output charger with proper charging current and voltage range.
-
Keep away from the water or any flammable gas, liquid.
-
Do not expose the device to direct sunlight, dust, moisture or mechanical shock.
-
Do not expose the device to extreme temperature.
(Recommended temperature range: -10~60 ℃ / 14~140 ℉ using and -10~45 ℃ / 14~113 ℉ while storing). -
EEE Recycling: the product should not be treated as household waste, instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
-
Battery Recycling: the product battery should not be treated as household waste, instead, it should be handed over to the applicable used battery collection point for recycling.
-
Only have your device repaired by VAPORESSO. Do not attempt to repair it by yourself as damage or personal injury may occur.
-
Please keep the pins at the connection between the battery and the pod clean to ensure the best performance of the device.
WARNINGS
This refillable electronic cigarette is intended for use with compatible e-liquid, which may contain nicotine. Nicotine is an addictive substance and it is not suitable or recommended to use in following cases:
-
This device is not suitable for:
– Persons under the legal smoking age.
– Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficult breathing due to bronchitis, emphysema or asthma.
– Persons with an overactive thyroid gland or experiencing pheochromocytomas (a tumors of the adrenal gland that can effect blood pressure).
– Persons taking certain medications like
Theophylline, Ropinirole or Clozapine and etc. -
This device is not recommended for:
– Non-smokers
– Pregnant or breastfeeding women -
You may experience the following results if you use nicotine containing e-liquid with this product. If it happens, please consult a healthcare professional and show them this leaflet if possible:
Feeling faint / Nausea / Dizziness / Headache / Coughing / Irritation of the mouth or throat / Stomach discomfort / Hiccups / Nasal congestion / Vomition / Chest palpitations /pain or an irregular heart rate.
This device should not be used by persons under the legal smoking age.
Warranty Claim Procedure
Warranty Claim Procedure
- Please kindly contact the seller you purchased the product from for repair or replacement.
- Alternatively, if you have any product related question, you can scan the QR code below.
https://mkwer.s2.udesk.cn/im_client/?web_plugin_id=23129&language=en- us
Information Needed for 90-Day Limited Warranty Claim:
- Proof of purchase
- Product name and quantity
- Batch number (VSGXXXX) and Security code (With pictures)
- Descriptions on the product problem
- Videos or pictures that reflect product problem
Notes
- It usually takes 5-10 days to verify all submitted warranty claim information. Please wait patiently.
- Once the requested warranty claim information is confirmed and approved, we will arrange a replacement for you. Please kindly note that if the original replacement product is out of stock or discontinued, we will ship an item of equal value to you with your consent.
* VAPORESSO reserves the right of final interpretation of the warranty claim service
LASER ANTI-COUNTERFEITING LABEL INSTRUCTIONS
Please keep the anti-counterfeiting code on the packaging for after-sale
service.
STEP 1 Check the label
Flip the label under light with different angle, you will see the letter “V” position change.
STEP 2 Verify the QR code
LIMITED WARRANTY CARD
Limited 90-Day Warranty Terms
VAPORESSO will provide repair or replacement to the original purchaser of this
product under warranty according the following terms and conditions:
- This warranty covers any defects in materials or workmanship in this product if a claim is submitted to VAPORESSO within 90 days of purchase by the end user.
- This warranty may be disqualified as a result of the following circumstances:
► the customer does not provide this warranty card and the original receipt of purchase.
► merchandise failure or damage is caused by improper use or unauthorized adjustments.
► merchandise failure or damage as a result of excessive force or impact and non recommended operating conditions (see user manual).
► merchandise failure or damage caused by exposure to water or other conducting liquids.
► merchandise failure or damage caused by use with non-VAPORESSO brand components or recommended e-liquids.
3 In no event will VAPORESSO be liable for any SPECIAL or CONSEQUENTIAL damages arising from the use of this product, nor for injury to any person, or any claim for damages arising from the use of this product. Except as expressly provided in this Limited Warranty, VAPORESSO expressly disclaims all implied warranties for this product of any kind whatsoever, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose and all warranties imposed by statute, after the expiration of 90 days after purchase by the end user.
For more information please consult our website at
www.vaporesso.com or email us at
[email protected]
Please keep the warranty card for the after-sale service. Warranty will be
disqualified if the warranty card is lost.
Purchase Information
Product Model:
Date of Purchase (Baesd on the date from receipt of purchase):
Month Day Year _
Store Information:
Store Name: ___
Phone: __
Store Address:
City: ____Country: ____
Post Code: ____
Customer Information:
Customer Name:
Phone: __
Customer Address: __
City: __ Country: ___